Reviews Thread Rolling Flat Die

WASTOREEL 12mm x 1.25 HSS Metric Right Hand Thread Tap and Die Set M12 x 1.25mm Pitch

  • MODEL: M12 x 1.25 Metric Tap and Die set, Material: HSS.
  • ROUND THREAD DIE: Not easily broken tooth chip fast, abrasion resistance and long service life..
  • THREAD TAP: debris rapidly discharged in the tank. No blocking, fast efficiency and high efficiency..
  • CHARACTERISTICS: Heat treated and tempered for file hard threads and a long, useful life..
  • PACKAGE INCLUDES: 2pc M12 x 1.25 Metric TAP & 1pc M12 x 1.25 Metric DIE.
Check Stock

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, #4-20 Thread Size, 3/8\ Length (Pack of 100)

  • Thread rolling screw recommended for use in plastic.
  • Steel is often used in applications where strength is the primary consideration.
  • Black oxide finish offers mild corrosion resistance and lubricity.
  • Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface.
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening.
Check Stock

WYNNsky Die and Tap Set in SAE and Metric, Hex Threading Dies for External Threads, Thread Tap for Internal Threads, Thread Wrench, Thread Pitch Gauge, 86PCS Gauge Kit for DIY Tapered

  • This tap and die set are made of made of high carbon chromium bearing steel which are more stronger, An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel..
  • 86 piece tungsten steel set comes in an organized, rugged plastic storage case.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman.
  • Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Check Stock

1/2\ NPT Pipe Carbon Hex Rethreading Die

  • ✅ One Set is Enough: Our Die set include 1/4''-20, 5/16''-18, 3/8''-16, 7/16''-14, 1/2''-13, 9/16''-12, 5/8''-11, 3/4''-10, 7/8''-9 and 1''-8 UNC. A variety of dies are sufficient for almost all maintenance and repair work..
  • ✅ Superior Durability: We cooperated with the material research institute to change the ratio of carbon in the material, greatly improve the comprehensive mechanical properties of the material, and greatly increase the service life of our dies..
  • ✅ Precision Thread: The latest production technology maximizes the processing accuracy of the thread, and the outer surface of the threading die is smoother..
  • ✅ Portable Metal Case: An exquisite tool case will bring you great convenience, and the tools will be returned in time after use, reducing the risk of gadget loss..
  • ✅ 1 Year Warranty: No matter what problems are encountered when using our re-threading hex die set, we will solve it for you within 6 hours, and one-year warranty!.
Check Stock

Balancing Games Desktop Pizza for Kids Topple for Pizza Pile Up Family Toy

  • Made of- friendly ABS plastic, bright colour, round smooth surface, very safe for your children to play..
  • Unique, balancing game delivers fun to the whole family! Help to pile on the toppings to make his pizza. But make sure it doesnt wobble and topple the....
  • take turns rolling the die and placing cheese, tomatoes, mushrooms and pepperoni pieces onto the pizza pie.
  • take turns rolling the die and placing cheese, tomatoes, mushrooms and pepperoni pieces onto the pizza pie. Made of- friendly ABS plastic, bright....
  • Preschool Stacking Block building blocks montessori toy stackable toys.
Check Stock

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

Howards End

  • PRECISE MATING OF LOCK RING: Easy-to-use cross bolt connects the two ends of the ring instead of a traditional screw design that tightens directly into the threads of the die, resulting in a more precise mating of the lock ring threads to the die threads..
  • RELIABLE ALIGNMENT: Full size lock ring provides a more reliable alignment with no canting, and no damage to the die threads, which remain undamaged..
  • EASY ADJUSTMENT: Tightening or loosening the steel cross bolt screw requires only a 7/64″ Hex/Allen Key (not included)..
  • STANDARD FIT: The Forster Cross Bold Die Lock Rings fit standard 7/8″-14 thread dies from most manufacturers..
  • FOR FORSTER SEATER & SIZING DIE: Works with all Forster Products high-quality sizing and seater dies. The Forster DIE-G-10 is a direct replacement part for the lock rings on Forster sizing and seater dies..
Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

60 PCS Tap and Die Set Metric and Standard Sizes Included Tap Die Kit Metric and SAE for Threading and Rethreading Internal and External Threads

  • SAE & METRIC TAP & DIE SET: These 54 Orion Motor Tech taps and dies cut and clean internal and external threads in common conventional and metric sizes.
  • the set also includes adjustable tap and die wrenches, a T-handle tap wrench, a 1/8" flathead screwdriver, and a thread pitch gauge to cover all your needs.
  • USER-FRIENDLY DESIGN: Our standard and metric tap die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 5-10mm long to allow easier use with the provided wrenches.
  • WIDE APPLICATION: These threading tools work perfectly to correct or create internal and external threading through wood, copper, aluminum, iron, carbon steel, and more!.
  • CHROMIUM STEEL: The thread repair set is constructed with GCr15 bearing steel heat treated for durable and corrosion-free performance with satisfying longevity.
  • BLOW-MOLDED CASE: The blow-molded case stores and organizes the tools, providing easy portability wherever you need them to thread and rethread internal and external threads.
Check Stock