Reviews Thread Rod

uxcell 10 PCS M2 2.0xL19mm Lever Steering Linkage Tie Rod End Ball Head End for RC Helicopter

FEATURES: Center Hole Diameter: 2.0mm/0.08 inch, Bottom Hole Diameter: 1.65mm/0.065 inch, Total Length : 19mm/0.75 inch, Fit Rod Thread: M2.
SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).

The handheld equipment includes an aluminum-made mount, a rough thread rod, a solid steel nut, 2 pieces of lever handles and a 3-piece aluminum brick mold..
The Internal dimension of the 3-piece brick square maker : 2.47"(width) x 4.36" (Length) x 1.75" (Depth), we do not recommend putting the paper inside of the maker..
The equipment is very easy to use by hands, just insert the press handle to the doube-side holes of the press and insert another handle to the hole on the thread rod, and then twist two handles hardly..
The press made of 6061 aluminum that is capable of being heated, preheat the maker or put the press inside of the hot water..
Well noted, the aluminum maker only works with the thread press, please do not pair it with other equipment to protect it from damage but the thread press works with 2x4" or cylinder prepress, the dimension of the base: 5"L x 3.1"W x 4.3" ( Max Height )..

SIZE: Male Thread Size(Screw): M6 x 12mm(D*L).
Female Thread Size(Top): M6 x 12mm(D*L)..
APPLICATION: It is ideal for thin albums, decorative bags, leather belts, sandals, boots, leather bags, helmets, etc.Fit for all kinds of art and leather crafts and DIY clothing production..
INSTRUCTIONS: Make a hole larger than 0.5mm than the diameter of the nut rod, put screws and nuts on both sides of the locked object, and select the appropriate tool to lock it..
NOTICE: Use post screws to lock, the thickness of the lock must be less than the length of the screw rod + nut rod, otherwise, it will not be locked..
ADVANTAGE: Precision mechanical thread, made of high-quality stainless steel material,anti-rust. Our screws are an important addition to any leather clothing or accessories..

Price For: Each Basic Material: Steel Fastener Finish: Plain System of Measurement: Inch Material Grade: Low Carbon Rockwell Hardness: B85 to B97 Fastener Thread Direction: Right Hand Item: Threaded Rod Yield Strength (PSI): 45, 000 Thread Class: 1A Fastener Thread Type: UNF Dia./Thread Size: 1/2"-20 Tensile Strength: 60, 000 psi Overall Length: 1 ft..
Country of Origin (subject to change): United States.

Package :M8 x 80mm right hand full threaded rod 10PCS, M8 hex nuts 20PCS, M8 washer 20PCS..
Thread rod Dia.: M8, Thread Pitch: 1.25mm,total length: 80mm made of 304 stainless steel, provides great corrosion resistance and anti-rust ability for long service life, thread direction: right-hand thread..
These threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
These threaded studs can be drilled, cut, heated and shaped and widely applied in many occasions: anchor bolts, clamps, hangers and U-bolts and many more projects..

Ample Quantity: the package comes with 12 pieces of 8/32 inch M4 12 inch threaded rods and 12 pieces of M4 hex nuts, a total of 24 pieces, a nice set is ideal for making a dozen (fairy garden stakes)fairy garden stakes or the other projects.
Dimension: the threaded rod is about M4 in thread diameter, 300 mm/ 12 inch in total length.
The hex nut is about M4 in coarse thread diameter, 0.7 mm/ 0.03 inches in pitch, 0.28 inch/ 7 mm in width across flat, and 0.11 inch/ 2.8 mm in height.
Threaded Rods Studs: the 8/32 threaded rod is made of 304 stainless steel, safe, sturdy, with corrosion resistance and antirust ability, and can offer you a long time service.
It can be applied for assembly fastening, just screw it into threaded nuts or tapped holes.
Hex Nut: the hex nut is an ideal replacement for industrial and construction fasteners and an essential accessory in your daily life, simply screwing it onto a bolt, cap screw or threaded rod of the same thread size, quick and easy.
Widely Applicable: these fairy stake rods can be widely applied to bolts, clamps, hangers and U bolts and many....

【Package Include】5pcs M4 x 250mm Threaded Rod, can be drilled, cut, heated and shaped..
【Material】Made of high quality 304 stainless steel, excellent corrosion resistance and anti-rust ability for a long service life..
【All Thread】Used for assembly fastening, screw into threaded nuts or tapped holes..
【Applications】Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..

FEATURES: Center Hole Diameter: 2.0mm/0.08 inch, Bottom Hole Diameter: 1.8mm/0.07 inch, Total Length : 19mm/0.75 inch, Fit Rod Thread: M2.
SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).