GBC Document Camera, Discovery 3000 (DCV10004)

  • pyrometer Temperature range: -50°C to 1300°C ( -58°F to 2372°F) and Overload display alert when input exceeds measurement range pyrometer. Thermocouple Temperature range: -50°C to 1000°C ( -58°F to 1832°F).
  • Designed for use with K-type thermocouples and Selection between Celsius and Fahrenheit.
  • Decimal or round number display selectable (decimal range is -58.0F to999.9F and round number range is -58F to 2372F).
  • Includes 2 Thermocouples ( One 3" K type temperature probe (-58 – 752 °F) and one Kiln Heavy duty K type Thermocouple ( -58°F to 1832°F) and Digital Pyrometer, 9V battery and Manual.
  • Thermocouple Measurement range: 32 - 1832 °F (0 - 1000 °C) Thermocouple Type: K Type Cable length : 3 ft Sensing tip length: 6" (150mm) Stainless Steel Sensing tip diameter: 0.19" (5mm) Thread width : 5/16" (M8) Internal Insulation: Fiber Glass External shielding: Metal Shield (Stainless steel braided).
Check Stock

Coolrunner Gas Patio Heater Repair Replacement Parts Outdoor Heaters Safety Kits Thermocouple (M8 x1) and FD4 Dump Switch for Propane Gas Patio Heater

  • Well Made & More Safe: The thermocouple is made of brass and red copper and the anti-tilt switch, made of ABS, which will automatically stop heating when the gas heater is tilted..
  • Wide Compatibility: The patio heater thermocouple replacement is suitable for most of propane heater, patio heater and other gas heaters with thermoelectric safety..
  • Dimension: The total length of thermocouple is 350mm, thermocouple probe is M6*0.75 and threaded end is M8*1, please measure your original parts before ordering. Weak current FD4 dump switch is for gas R≤10 mΩ..
  • Easy to install: It is easy to replace just follow the way you remove the defective part. Notice: Keep the thermocoupler probe about 5mm from the burner hole..
  • Great Value for Money: If the thermocouple or dump switch of your gas heater is broken, you just need to change the replacement that will save $200 for you..
Check Stock

UNI-T UT701 Single Function Temperature Calibrator

  • 1. Up to 0.05% output accuracy 2. 6-digit display 3. Output functions: DC voltage, resistance, thermocouple, and thermal resistance.
  • 4. 10 thermocouple scales 5. 4 thermal resistance scales 6. High precision automatic cold junction compensation for thermocouple outputs.
  • 7. Manual stepping and automatic stepping and ramping 8. Stores and recalls setups.
Check Stock

NOXTON 30cm Built-in Domino Gas Cooktop, Gas Stove Top 2 Sealed Burners, Black Glass Cooker Hob 2 Burners with LPG Kit & FFD Plug, 110V~240V

  • ✅ Meet All Cooking: Two burners, 10236 BTUs, 5971btu. Energy efficient, instant heating, full combustion, meet all cooking, boil, stew, fry, stir fry, switch from one mode to another as needed..
  • ✅ Protection Setting: This gas cooktop in the fixed cooktop use an automatic thermocouple protection, which ensures the gas is automatically turned off, helping to avoid gas leakage when no flame is detected..
  • ✅ Durable Quality: Made of highly polished glass with Matte Enamel support, which features preventing rust, safe and non-toxic, easy to clean, high hardness, high temperature resistance, wear-resistant insulation , no discoloration and so on. With flame failure device, so it will provide you with a easy to clean, reliable cooktop for cooking..
  • ✅ Easy Installation & Safe: This black glass gas hob is a plug and go unit that can be installed quickly and easily, electronic ignition system, no battery required. And features thermocouple protection, safe grates & knobs, and heavy iron cast support. Also flame out protection device (FFD) installed on each burner. Flame failure device..
  • ✅ Easy To Operate: Automatic ignition via rotating control, flexible and accurate gas adjustment. Front control,natural gas and LPG use. Package contains LPG conversion ki....
Check Stock

Tempered Glass Gas Cooktop, 12 In Gas Stove Top Gas Cooktop 2 Burners, 120V Built-in Gas Hob Suitable For Dual Fuel LPG/NG, Thermocouple Protection-IsEasy

  • ✅ Meet All Cooking: Two burners, 10236 BTUs, 5971btu. Energy efficient, instant heating, full combustion, meet all cooking, boil, stew, fry, stir fry, switch from one mode to another as needed..
  • ✅ Protection Setting: This gas cooktop in the fixed cooktop use an automatic thermocouple protection, which ensures the gas is automatically turned off, helping to avoid gas leakage when no flame is detected..
  • ✅ Durable Quality: Made of highly polished glass with Matte Enamel support, which features preventing rust, safe and non-toxic, easy to clean, high hardness, high temperature resistance, wear-resistant insulation , no discoloration and so on. With flame failure device, so it will provide you with a easy to clean, reliable cooktop for cooking..
  • ✅ Easy Installation & Safe: This black glass gas hob is a plug and go unit that can be installed quickly and easily, electronic ignition system, no battery required. And features thermocouple protection, safe grates & knobs, and heavy iron cast support. Also flame out protection device (FFD) installed on each burner. Flame failure device..
  • ✅ Easy To Operate: Automatic ignition via rotating control, flexible and accurate gas adjustment. Front control,natural gas and LPG use. Package contains LPG conversion ki....
Check Stock

ennoLogic Volt mA Thermocouple Loop Process Calibrator eC370T - 0-20V and 4-20mA Simulator – Portable Millivolt mA and Temperature Signal Generator and Meter for Transmitters Current Loops PLC

  • VERSATILE AND ACCURATE VOLT MA THERMOCOUPLE CALIBRATOR: Signal generator, simulator and volt / mA meter for calibrating, testing and repairing milliamp loops, thermocouples, PLC, temperature control and HVAC systems. Easily generate precise test signals for current and voltage devices (mA, mV, V, Celsius and Fahrenheit ranges)..
  • NUMERIC KEYPAD for ease and flexibility in setting output signals configuring options. HOTKEY programming for each numeric key (long-press immediately outputs user-configured voltage, current or temperature signal). RAMP AND LADDER OUTPUT FUNCTIONS can be custom configured. BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire current loops..
  • MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution, 0.06% accuracy) and 0-20V (1mV resolution, 0.08% accuracy). MEASURE CURRENT TRANSMITTERS within a range of 0 to 24mA with 0.001mA resolution and 0.08% accuracy. MEASURE THERMOCOUPLE TEMPERATURES within a range of -250°C to +1800°C and resolution of ±0.7°C to ±2°C (range and resolution depends on thermocouple type, supported are type K, J, E, T, N, S, R, and B.).
Check Stock

Bakers Pride M1296X 72 Long T46 Thermocouple

  • K-type Thermocouple wire for making thermocouple or extension wire, up to 752 °F (400 °C).
  • Chromel / Alumel type K thermocouple wire with Standard Accuracy: +/- 2.2 °C or +/- .75%.
  • The K-type wires are AWG 24 (0.51 mm) in diameter.
  • ANSI color coded braided fiberglass insulation, red = -, yellow = +.
  • 10 yard ( 30 ft ) roll, wire is flexible and easy to bend to shape.
Check Stock

Thermocouple Probe Kit Compatible with Traeger Ironwood 650/885 and Pro 575/780, KIT0422

  • T-type thermocouple connector, real Copper / Contstantan contacts.
  • Miniature or mini T-type connector dimensions.
  • Works with all T-type thermocouple wires and extension wire.
  • 5 sets, each contains a male and a female connector (2 pieces).
  • Compatible with thermocouple plugs from other manufacturers.
Check Stock

MENSI Propane Gas Fireplaces Fire Pits DIY Safety Replacement Part Pilot Burner Assembly for Propane Igniter Kit M8x1 Thermocoupler with OD 4mm Copper Tube Connection

  • Safety pilot kit with ignition 2.8*0.5mm Flat terminal for Igniter & thermocouple sensor M8*1 end thread for valve 900mm.
  • With stainess steel gas collecting box protect the flame to be extinguished and more efficient for ignition sparks.
  • Designed for Fireplaces & Fire pits for propane gas (compare the size before ordering).
  • This can be a DIY gas appliance and easy install with necessary nuts, Each connection should be connected well so can work perfectly.
  • Attention: 900mm pilot gas tube included with M8X1 Olive Nuts for gas valve pilot port. 4mm diameter Copper tube.
Check Stock