Reviews Thermal Components

TF8 Thermal Compound Paste 13.8 W/mK Carbon Based High Performance Heatsink Paste CPU for All Coolers Interface Material 2 Grams with Tool

  • [HIGH THERMAL CONDUCTIVITY]: Composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat....
  • [SAFE APPLICATION]: The TF8 is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to....
  • [HIGH DURABILITY]: In contrast to metal and silicon thermal compound, the TF8 does not compromise over time. Once applied, you do not need to apply it....
  • [EASY TO APPLY]: With an ideal consistency, the TF8 is very easy to use, even for beginners..
  • [THERMAL COMPOUND]: Formula, the TF8 guarantees exceptional heat dissipation from the components and supports the stability needed to push your system....
Check Stock

10 Pack HY880 Thermal Paste Kit-5.15 W/MK 1 G/Pcs, High Performance Thermal Compound Paste Grease Heatsink for CPU, Processor, All Cooler Master, Computer, PS4

  • ✔【Better Than Liquid Metal】Super carbon nano-grade super thermal conductive silicone grease. Thermal conductivity 5.15 W/m-k. It ensures that the heat generated by the CPU or GPU is effectively dissipated..
  • ✔【Safe For You And Your PC】Strong insulation performance, withstand voltage above 10,000 volts..
  • ✔【Easy to Use】Thermal paste has ideal consistency and is very easy to use even for beginners..
  • ✔【High Durability】Low thermal resistance can keep mushy for a long time. Wide operating temperature range, stable performance under -30℃-280℃ environment. High heat dissipation performance, high-cost performance. It will not compromise over time..
  • ✔【Safety Application】Suitable for CPU radiator or chip. High-temperature resistance, low thermal resistance, and high conductivity can achieve excellent heat transfer. Suitable for CPU, VGA, chipset, and other PC components..
Check Stock

Littelfuse FLNR025 UL Class RK5 Dual Element Time Delay Fuse, 25 amp, 250/125V

  • This is a single-use device that cannot be reset and must be replaced when it fails or is triggered..
  • The use of thermal particulate materials as a thermal insulation of the metal thermal fuse..
  • Function is to cut off the circuit of appliances when temperature exceed specified TF value because of unexpected fault..
  • Widely used in electric current provider, power switch, computer, telephone, home appliance, communication products, all kinds of instrument and electronic and electric components, motor and all kinds of small home appliance such as electric iron, thermoelectric blower, microwave oven, refrigerator etc. as heat protection, etc..
Check Stock

iHTP Thermal Pad 12.8 W/mk Non Conductive Heat Dissipation Silicone Pad for PC Laptop Heatsink/GPU/CPU/LED Graphics Card, 70x20mm, 0.5mm, 1.0mm,1.5mm, 2.0mm 4 Packs

  • Excellent Thermal Conductivity - With upgraded thermally conductive silicone materia, the thermal conductivity is up to 15 W/mK, the Themalright thermal pads greatly improve heat transfer between electronic components and effectively cool down in seconds..
  • Easy to Use - Size 70x20mm(thickness include: 0.5mm,1mm,1.5mm,2mm, total 4pcs.), the thermal pad can be freely cut according to your needs, filling the contact surface gap perfectly, it is an excellent assistant for beginners and professionals..
  • Easy to Use -the thermal pad can be freely cut according to your needs, filling the contact surface gap perfectly, it is an excellent assistant for beginners and professionals..
  • Widly Application - nicely replaces traditional heatsink compound grease paste, suitable for control board, motor, electronics, GPU, heat sink, power LED, auto mechanics, computer host, laptop, DVD, VCD, LID, Set-top box, LED IC and any cooling modules..
  • NO Risk Purchase - We committed to provide superior thermal pads, easy to install, feel free to contact us if there is any issue with our thermal pads..
Check Stock

HASAYAKI 30 Pack Thermal Pads, 20×67 mm by 5 Thickness 0.5 | 1 | 1.5 | 2 | 3 mm, Thermal Conductivity 2.0 W/m.k, Self-Adhesive & Soft, Ideal for Repairing and Cooling Electronics

  • [ PREMIUM MATERIAL ] Thermally conductive silicone compound provides 2.0 W / (m.k) thermal conductivity, which can effectively improve heat transfer between electronic components and heat sink, cool down in seconds.
  • [ CONVENIENT ASSORTMENT ] The package contains 30 pieces 67x20 mm thermal pads. 6 Pieces for each thickness: 0.5 / 1.0 / 1.5 / 2.0 / 3.0 mm. They can be cut, reusable and overlapped.
  • [ SAFETY & STABILITY ] RoHS & PAHs Compliant. Working condition: -40 to 200 degree Centigrade. Hardness: 40 Shore. Density: 2.4 g/cm³. Breakdown Voltage: 5 KV/mm. They are Anti-static, flame retardant, buffering, odorless, non-corrosive, non-irritating, sticking but not damaging to electronics.
  • [ Easy to Use ] Clean the heating surface. Measure and cut to suitable size. Remove the protective film from bottom of the thermal pad. Stick it on the surface, press lightly, then remove the protective film from the top. Install the heat sink and make good contact with thermal pad. The thermal pads become stickier when heated.
  • [ Wide Application ] : Thermal pads are widely used in thermal m....
Check Stock

CS LABS Thermal Paste & pad Replacement Set K5 PRO K5-PRO & K4-PRO compatible with iPhone, iMac PS4 PS3 Xbox Asus Dell etc

  • ...commercial electronics) .K5-PRO is applied very easily directly on the component and has no electrical conductivity. It can be heated up to 250 degrees (Celsius) and has a long operational life time (practically infinite after the installation).
  • K4-PRO is a high quality thermal paste designed for use on computer BGA components (GPU, CPU, etc).K4-PRO is a very low viscosity thermal paste (especially when heated during the first use). It will cover all the invisible gaps between the component and the heatsink without creating a film of paste like most low cost thermal pastes..
  • K4-PRO has thermal conductivity K>4,6 W/m.K * (3 times higher than common thermal pastes that are used on computers and commercial electronics).K4-PRO is applied very easily directly on the component and has no electrical conductivity. It can be heated up to 220 degrees (Celsius) and has a long operational life time (practically infinite).
  • Computer Systems matterials science laboratory testing : Method using a comparative technique (P. Karydopoulos, P. Frantzis, N. Karagiannis MSAIJ 2014).
Check Stock

Thermopad Thermal Grizzly Minus Pad 8 - Silicone, Self-Adhesive, Thermally Conductive Thermal Pad - Conducts Heat and Cools The Heating Elements of The Computer or Console (100 × 100 × 2,0 mm)

  • ...commercial electronics) .K5-PRO is applied very easily directly on the component and has no electrical conductivity. It can be heated up to 250 degrees (Celsius) and has a long operational life time (practically infinite after the installation).
  • K4-PRO is a high quality thermal paste designed for use on computer BGA components (GPU, CPU, etc).K4-PRO is a very low viscosity thermal paste (especially when heated during the fist use). It will cover all the invisible gaps between the component and the heatsink without creating a film of paste like most low cost thermal pastes..
  • K4-PRO has thermal conductivity K>4,6 W/m.K * (3 times higher than common thermal pastes that are used on computers and commercial electronics).K4-PRO is applied very easily directly on the component and has no electrical conductivity. It can be heated up to 220 degrees (Celsius) and has a long operational life time (practically infinite).
  • Computer Systems matterials science laboratory testing : Method using a comparative technique (P. Karydopoulos, P. Frantzis, N. Karagiannis MSAIJ 2014).
Check Stock

K4-PRO 500g high Thermal Conductivity Thermal Paste K 4,6 W/m.K for Computer heatsinks Ideal for laptops and Apple iMac

  • K4-PRO is a high quality thermal paste designed for use on computer BGA components (GPU, CPU, etc)..
  • K4-PRO has thermal conductivity K>4,6 W/m.K (3 times higher than common thermal pastes that are used on computers and comercial electronics) Computer....
  • K4-PRO is applied very easily directly on the component and has no electrical conductivity. It can be heated up to 220 degrees (Celcium) and has a....
  • K4-PRO is produced in EU (Thessaloniki, Greece) and can be shipped to your location worldwide very fast. We use a 4th day delivery service worldwide..
  • K4-PRO is a very low viscosity thermal paste (especially when heated during firs use). It will cover the invisible gaps between heatsink and component....
Check Stock

ASUS Sabertooth Z97 MARK1 ATX DDR3 2600 LGA 1150 Motherboards Sabertooth Z97 MARK1

  • TUF Thermal Armor – Total Airflow-Boosting Heat Dissipation.
  • TUF Thermal Radar 2 – Real Time Temp Detection and Heat Removal.
  • TUF Dust Defenders – Repel the Dust, Expand the Lifespan.
  • TUF Components [10K-Cap., New Alloy Choke & MOSFET.
  • SATA Express onboard – Up to 10Gb/s data-transfer speeds.
Check Stock