Reviews Test Tool For Gm

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Camshaft Holding Tool Cam Holder Retaining Tool Kit J-44221 for GM IN-LINE 6 CYL

  • HIGH STANDARD QUALITY: Made of superior structural steel and coated with black oxide finish, it is an excellent solid plate, which is effective for....
  • INTENDED USE: Holding the camshafts at Top Dead Center to ensure proper timing when servicing cams, gears, chains, etc. and positioning over the ends....
  • APPLICATION:Fit for Chevrolet 1999 CAL V8 5665cc 5.7L.
  • 2005-2009 GM V8 5328cc 5.3L, 1999-2005 GM V8 5665cc 5.7L, 2005-2011 GM V8 5967cc 6.0L,....
  • PACKAGE INCLUDED: 1 X Camshaft Holding Tool..
  • 100% SATISFACTION GUARANTEE: Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Camshaft Holding Tool,....
Check Stock

KZYEE KC501 OBD2 Scanner, ABS SRS Code Reader Airbag Scanner for Auto Check Engine Light Full OBD II Car Diagnostic Scan Tool, Vehicle Code Tester Cars Reading & Erasing Codes

  • ...DII scanner diagnoses ABS/ SRS system fault codes on common US car brands such as Ford, Chevy, Dodge, GM, etc and allows you to turn off the warning lights for you after fixing the problem..
  • 【FULL OBD2 MODEL】KZYEE KC501 OBD2 scanner is specifically designed to perform ABS SRS sytems diagnosis and all 10 modes of tests on OBD2/CAN system.Including read codes, erase codes, DTC search library, retrieves I/M monitor readiness test, displays freeze frame data, reads live data, performs O2 monitor test, on-board monitor test, component test, existing module and vehicle information (VIN, CIN and CVN)..
  • 【WIDLY COMPATIBILITY】 Supports multiple languages and all OBDII protocols: quickly reads and clears check engine light codes on all standard OBD2 protocols ( KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN.) Vehicles with 16 PIN interfaces. Works on more than 60 vehicle models worldwide, most of 1996 US-based, 2002 EU-based, 2005 Asian-based or newer OBD II & CAN domestic or imported vehicles, including cars, SUVs, light trucks and 12V diesel. TIPS : Not suitable for 24V heavy trucks..
  • 【INNOVATIVE DESIGN & PRINT】This code reader designed with 3 indicator lights to directly remind the user whether there are error codes or not. With KC501 OBD2 scanner, ....
Check Stock

KINGBOLEN EL-50448 Plus TPMS Relearn Tool for Ford GM Automotive Tire Pressure Monitor Sensor 315/433 MHz Reset Tool, 2 in 1 Activation Tool for F150/Focus/Lincoln/Buick/Cadillac Vehicle

  • 【Ford & GM Tire Sensor Relearn Tool】The EL-50448 Plus tire pressure monitor sensors 2 in 1 Relearn Tool is perfectly compatible with Ford and GM series cars, including F150, F250, Focus, Lincoln, Mercury, Buick, Cadillac, Chevrolet, GMC, Daewoo, Opel, Isuzu, etc.(Truck is not supported. No support for Toyota and Nissan).
  • 【Easy To Operate】1.Put a new 9v battery into the tool and set the car into TPMS learning model. 2.Start from left-front tire, point antenna against the sidewall of the tire, near the valve stem. 3.Depress the power button, the horn bleeps once then move to the next tire. 4.Follow this order to reset TPMS one by one: front left, front right, rear right, rear left tires. 5.After all sensors reset, the car horns twice means TPMS relearn finished.（9V battery not included）.
  • 【High-quality EL50448 TPMS Relearn Tool】The EL-50448 Plus tire sensors reset tool is portable and convenient, small but high performance, work well on most Ford and GM series cars equipped with 315/433 MHz. With good penetration, the tire pressure sensor can be easily reset and learned..
  • 【Trusted Tire Pressure Activation Tool】Through FCC certification, powerful circuit board and sensitive sensor chip design, our TPMS Relearn Tool EL-50448 Plus can acti....
Check Stock

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

  • REPLACe A/C CLUTCH ASSEMBLY: Use the ABN Air Compressor Clutch Rebuild Removal Tool Kit – AC Clutch Puller for Car Auto Air Conditioning to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors.
  • GM R4 and A6, HR-6, DA-6 and V A/C compressors.
  • sander compressors SD 505, 507, 575, 708, and 709.
  • Wide application of vehicles including GM, Ford, Chrysler, imports, and other makes and models.
  • Check vehicle owner’s manual for a list of compatible compressors.
  • EASY TO USE: Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
  • Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
  • BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
  • Resists rust and corrosion with proper care and lubrication.
  • 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
  • EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (2....
Check Stock

Adorish 0-140PSI Fuel Injector Injection Pump Pressure Tester Gauge Kit Fuel Pressure Test Kit TU-114 for Auto Car Truck SUV Motorcycle ATV RV

  • Application: Fuel pump pressure tester is suitable for various gasoline engines such as cars, trucks, SUVs, motorcycles, ATVs, RVs (except Bo-sch, CIS Je-tronic, GM car throttle body systems), not suitable for diesel high-pressure injection pumps or direct injection engines..
  • Fittings & Hoses: M8/M10/M12/M14 adapter for corresponding fuel Test port on rails.
  • 15"L hose for direct connection to 1/4" SAE standard US valve on the fuel pump.
  • Aluminum tee helps in-line splicing between the fuel pump and engine on most vehicles..
  • Fuel Pressure Gauge: A large 3-1/2" dial protected by a rubber cover, a 0-140psi/0-10bar range, and a two-color coded scale for easy reading..
  • Material: Made of high-quality brass, steel, rubber, plastic, provide accurate reading and long-lasting products..
  • Storage: Nice carrying case and a well-made tool, great for DIY or even professional use..
Check Stock

OTC 6779 Injector Puller for 2005-2011 GM Duramax Engines

  • OTC Injector Puller for GM Duramax engines - similar to Kent Moore J-46594.
  • For use on 2005-2011 model year GM Duramax 6.6L engines.
  • Safely pulls the injectors from the cylinder heads without pulling the injector cups.
  • Simply insert the tool into the injector retainer bracket bolt hole, attach a socket and ratchet/breaker bar to one of the hex ends and start rocking back and forth - the injector will pop right out.
  • Durable steel construction means tool will withstand heavy shop use and continue to perform as designed.
Check Stock

OTC 6778 Injector Puller for 2001-2004 GM Duramax Engines

  • OTC Injector Puller for GM Duramax engines - similar to Kent Moore J-44639.
  • For use on 2001-2004 model year GM Duramax 6.6L engines.
  • Safely pulls the injectors from the cylinder heads without pulling the injector cups.
  • Simply insert the tool into the injector retainer bracket bolt hole, attach a socket and ratchet/breaker bar to one of the hex ends and start rocking back and forth - the injector will pop right out.
  • Durable steel construction means tool will withstand heavy shop use and continue to perform as designed.
Check Stock

JIFETOR Radiator Coolant Pressure Tester Vacuum Refill Tool Kit, 28PCS Automotive Cooling System Leak Test and Pneumatic Purge Fill Set with Testing Adapter Caps Universal for Airlift Car Auto Truck

  • MULTIFUNCTION: JIFETOR all in one comprehensive coolant pressure tester fill kit includes leak detection, temperature measurement and coolant filling functions. Radiator pressure tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Coolant vacuum refill tool uses vacuum pump to extract air and form a vacuum to draw coolant into the cooling system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine..
  • WIDE USAGE: Cooling system pressure tester and coolant bleeder kit is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suits for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • COOLING SYSTEM VACUUM FILL TOOL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin ma....
Check Stock