Reviews Terminal Connector Insulated Terminal

Terminal Removal Tool, 76PCS 52 Sizes Economical Terminal Release Kits for Auto Car Wire Connector, Pin Extractors Key Set for Household Harness, Stainless Steel Rubberized Grips Terminal Ejector Kits

  • Wide Applications: This terminal removal tool can be widely used for most of the connector terminal removal, picker harness terminals and connector crimp pin removal. Most home appliances, cars, motorcycles and many other electronic devices..
  • Easy To Use: No need to pry open the terminals, just push and pull the terminal pins. The automotive terminal removal tools can effortlessly removing terminal wires from the wire harness connector and add a new wire, so you can maintain the factory original harness and plug in your own electronic device without any damage..
  • Material: Stainless Steel, Plastic. The pins terminals removal tools are made of stainless steel and plastic, the needles are steel and the width between needles can be change on your own if necessary, It has strong flexibility and durability. which can be used repeatedly, the O ring handle make it more safe to operate the terminal pins connectors. With Environmental protection rubberized grips to help with hold and control and not easy to scratch your hands..
  • What will you get: There are 76 pieces terminals removal key tools in total, include 25 pieces single pin extractors, 34 pieces double pin extractors, 1 piece three pin extractor and 16 pieces casing tools. 18pcs*2+20pcs+11pcs+3*3pcs, The ....
Check Stock

4 Pieces Battery Terminal Connectors 4 Way Battery Terminal with Hex Wrench Quick Release Disconnect Car Battery Terminal Copper Car Battery Terminal Positive Negative for SAE (Gold)

  • Package content: package includes 4 pieces battery terminal connectors, namely 2 pieces positives and 2 pieces negatives, and 2 pieces hex wrenches are also included, sufficient to meet your daily requirements of usage and replacement, bringing convenience to you.
  • Quality material: the quick release disconnect car battery terminal is made of pure copper with tin-plated, sturdy and firm enough for long term usage, and it would not deform or corrupt easily.
  • It has good electrical conductivity, thus it can decrease voltage distortion and transmission loss.
  • The hex wrench is made of stainless steel, which is stable for you to use.
  • Positive and negative labels: these copper car battery terminals have labels for you to recognize which one is the positive and which one is the negative.
  • Positive has a red label, and negative has a black label, helping you connect the correct terminal for the correct polarity.
  • Detailed sizes: in these battery terminal accessories, the inner diameter of the positive battery terminal connector is 17.5-19 mm/ 0.69-0.75 inch, the inner diameter of negative battery terminal connector is 15.9-17.5 mm/ 0.63-0.69 inch, the max wire clamp is 9.5 mm/ 0.37 inch, the mini wire clamp is 6.5 mm/0.25 inch, the minimum wire size is 16 mm/ 0.63 ....
Check Stock

Tnisesm/60pcs 2 Pin & 3 Pin 5mm/0.2inch Pitch PCB Mount Screw Terminal Block Connector (Can be Spliced) TN-T03G

  • Product Type: Boxed 2 pin & 3 pin Screw Terminal Block Connector, with a phillips screwdriver..
  • Package include: 40pcs x 2 Pin Screw Terminal Block Connector.
  • 20pcs x 3 Pin Screw Terminal Block Connector.
  • 1pcs x phillips screwdriver. All packed in a plastic container for easy use..
Check Stock

Tnisesm/70pcs 2 Pin & 3 Pin 5mm/0.2inch Pitch PCB Mount Screw Terminal Block Connector (Can be Spliced) TN-T03B

  • Product Type: Boxed 2 pin & 3 pin Screw Terminal Block Connector, with a phillips screwdriver..
  • Package include: 60pcs x 2 Pin Screw Terminal Block Connector.
  • 10pcs x 3 Pin Screw Terminal Block Connector.
  • 1pcs x phillips screwdriver. All packed in a plastic container for easy use..
Check Stock

EZSync HDMI to Terminal Block Adapter Kit, 2X Pack, Solderless Breakout Board, Plastic, EZSync912

  • The EZSync912 HDMI to terminal block adapter connects all 20 signals(including shielding) from a HDMI connector to two 10-position terminal block connector. The two 10-pin terminal blocks support screw-type wiring with enclosure and cable strain relief suitable for heavy duty industrial wiring applications..
  • Plastic case. Solderless terminal block. Compatible with HDMI 2.0, 1.4 and 1.3. Distance will be depending on cable quality..
  • Each package contains 2x sets of adapter kit. Size: Body-50mm x 23mm x 18mm.
  • Wiring diagram provided in image is for typical installation. The actual wiring could be different depending on your equipment..
  • If you don't know the wiring order on the other end of the cable, you need to ohm it out if you have a meter or cut the other end and re-wire both ends.
Check Stock

TKDMR 2Pairs Car Battery Cable Terminal Clamps-Connectors - Battery Terminal with Plastice Cover,Good Contact,Corrosion Resistance,Applicated in Car,Van.

  • √【Package Includes】: Our kit includes 2 pair of Negative and Positive Battery Cable Terminal Clamps Connectors and 4 pieces Pure Copper Wire Lugs Battery Cable Ends Copper Eyelets Tubular Ring Terminal Connectors..
  • √【High Quality】: Our Wire Lugs Eyelets Tubular Ring Terminal all are made of pure copper.And the Battery Terminals connectors has plastic cover, which is connected better than zinc alloy and has better corrosion-resistance..
  • √【Size】: Positive Battery Terminal Connectors:11/16"(17mm).
  • Positive Battery Terminal Connectors: 5/8"(16mm).
  • √【Applicated Scene】: It is used for automobiles, trucks and caravan battery terminal connector..
  • √【Quality Guarantee】: We are manufacturers. So don't worry about quality. We are highly confident with our products.you won't regret it if you got it! Buy it now!.
Check Stock

Kat5 Terminals 8015 Multi-Connection Battery Terminals Top Post for use in Marine Power Sports RV’s Automotive Applications – 5 Gang

  • Universal Positive + Negative Top Post Copper Battery Terminal Set with 2 M8 Nuts Compatible with Many Vehicles.
  • This Battery Terminal Set is Approved on almost 50 different Compatible Models including: Camry Corolla Prius Sienna Tacoma Tundra Sequoia ES GS IS LS....
  • Also This battery connectors are widely compatible with Altima, Maxima, Sentra, Murano, Pathfinder, Quest, Titan, Armada, Versa etc. part #....
  • The battery terminals Are made of Quality Copper, and has galvanized surface, which is rust-proof and durable. Also comes with Red and Black Plastic....
  • This battery terminal connector has positive and negative terminal components.
  • Each battery connector is equipped with an M8 nut for easy....
Check Stock

GearIT Flat Speaker Wire Terminal Block Connector (4 Pack) for Hidden Invisible Flat Wire, Paintable Speaker Wire, Flat Low Voltage Wire in White, 4 Pk

  • WIRE TERMINAL BLOCK CONNECTOR - No need to drill holes into the walls or waste time using fishing wire to go through the wall. Use our Super Flat Speaker Wire Terminal Block Connector to get a clean speaker setup. Blends in with the wall for a hidden and invisible speaker wire experience. Can also be used with paintable speaker wire to blend in with the wall color..
  • MAX 12 - 23 GAUGE WIRE CONNECTOR - Compatible with 12, 14, 16, 18, 20, 23 awg speaker wire for acoustic surround sound for your audio sound system. Flat low voltage wire can be used as electrical wire with a max voltage of 35V..
  • WORKS WITH ANY SPEAKER – Transform your speaker connection like never before by being able to hide the wire or have a more professional look without needing to drill or open any walls..
  • EASY INSTALLATION GUIDE - 1) Cut edges of flat speaker wire. 2) Remove covering on both sides of copper wire 3) Insert flat wire into connector opening with adhesive side facing down. 4) Connect speaker cables to the wire terminal block connector to test the connection. 5) Attach flat wire to the edge of the wall. 6) Use primer and paint to paint over flat wire..
  • WIDE APPLICATION - Great application and use cases such as flat speaker wire, flat wire LED, flat voltage wire, hidde....
Check Stock

URBEST 5Pcs Terminal Block 4 Position Dual Row Screw Covered Strip 600V 25A with 400V 25A 4 Position Pre Insulated Terminal Barrier Strip Red/Black 10Pcs

  • Barrier Terminal Block Species: Material : Metal, Plastic.
  • Block Size : 68 x 30 x 19mm/ 2.7" x 1.2" x 0.75".
  • Fork Terminal Strip Species: Material : Brass, PVC.
  • Terminal Stripe: Inside Width : 3.8mm/0.15".
  • Easy to use: The fork terminal stripe can be cut in any position to meet with your different demand, very handy.
  • Package Included: 5pcs dual row terminal block, 10pcs insulated terminal strip(black and red).
Check Stock