Reviews Tension Control Lag Bolts

Prime-Line 9070468 Turnbuckles, Eye-To-Eye, 5/16 in. X 9-1/4 in., Zinc Plated Steel & Aluminum, 5-Pack

  • Used to maintain and adjust tension on cable, rope or chain.
  • Rotating the frame will simultaneously pull eye bolts in towards each other (Note: Pliers can be used if too difficult to turn by hand).
  • Allows for increasing or decreasing tension without having to rotate eye bolts.
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag screws MUZATA CB24. For angled stairs, drill guide MUZATA CT09 is necessary to drill holes.
  • Pre-Designed System-To help you construct a cable railing system, we pre-designed a cable railing system named WoodBudget especially with 1/8" swage lag screw Muzata CK17, hydraulic crimper and cable cutter MUZATA CK12, drill guide MUZATA CT09, level protector sleeve MUZATA CR13, angled protector sleeve MUZATA CR68, 1/8" wire rope....
Check Stock

#8-32 X 7/8'' Stainless Phillips Oval Head Machine Screw, (100 pc), 18-8 (304) Stainless Steel, by Bolt Dropper

  • OUR PROFESSIONAL HEX LEG BOLT are often located in a position that makes bolt kit susceptible to corrosion and therefore is an obvious choice both in terms of weight saving, appearance, and performance..
  • FANTASTIC CORROSION RESISTANCE. Fasteners kit is used widely in the home and office appliance, communication equipment and other machinery industry..
  • WE OFFER A GREAT METRIC HARDWARE ASSORTMENT: Hex Bolts, Machine Screws, wood screws, Carriage Bolts, Lag Bolts, Wood Screws, Sheet Metal Screws. Just select a couple and Add to Cart!.
  • CHOOSE FASTENERS KIT SET FOR GENERAL PURPOSE USE. These bolt assortment intended for both manual and automatic screwing, twisting and tightening with the maximum force developed by any bolt tool..
  • STAINLESS STEEL BOLT SET ARE RELIABLE AND DURABLE and are used in many applications. It is widely used both for private repairs and for fixing parts of large production facilities..
Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag screws MUZATA CB24. For angled stairs, drill guide MUZATA CT09 is necessary to drill holes.
  • Pre-Designed System-To help you construct a cable railing system, we pre-designed a cable railing system named WoodBudget especially with 1/8" swage lag screw Muzata CK17, hydraulic crimper and cable cutter MUZATA CK12, drill guide MUZATA CT09, level protector sleeve MUZATA CR13, angled protector sleeve MUZATA CR68, 1/8" wire rope....
Check Stock

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

  • Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag screws MUZATA CB24. For angled stairs, drill guide MUZATA CT09 is necessary to drill holes.
  • Pre-Designed System-To help you construct a black INDOOR cable railing system, we pre-designed a NeatBlack system with 1/8″ swage lag screw CK17 black, hydraulic crimper and cable cutter CK12, drill guide CT09, adhesive washer CR67, black level protector sleeve CR13, black wire rope WR19. (Note: This system is ONLY for INDOO....
Check Stock

Heavy Duty Storage Racks Holds Up To 480lbs by Delta Cycle & Home - Wall Mounted Solution for Garage, Basement or Pantry - Premium Steel & Adjustable Lumbar Rack Organizer - Easy-to-Install

  • Heavy Duty Lumber Storage Rack :: Delta's wall mounted rack is crafted from premium steel with a hammered powdercoat finish. The shelving hardware includes lag bolts and locking pins that bare up to 480 lbs of weight, or 160 lbs per individual shelf..
  • Wood Rack Dimensions & Specifications :: Package includes 2 upright wall racks, 6 arm brackets, 2 rack adapters, and all necessary lag bolts and locking pins. When fully installed, the measurements are 20.5 inches H x 16 inches D x 32 inches W. Wood not included..
  • Designed To Adjust For Your Needs :: Each steel arm is adjustable at 2" height intervals. Joining clips are included to connect an additional rack. Mount anywhere around the home to a stud in the wall..
  • Free Up Valuable Floor Space :: Store excess garage or workshop items such as lumber, paint, and tools. Makes a convenient pantry organizer. Fix up your outdoor shed to store a ladder & bins. Create racks for storage above your washer & dryer..
  • Premium Support In The USA :: We provide personal customer support and respond to all messages and questions in a timely manner. We offer a limited lifetime warranty that covers defects in workmanship and materials..
Check Stock

YOGABODY Yoga Trapeze Ceiling Hooks, Indoor or Outdoor, Set of 2

  • Official design for yoga trapeze, the popular yoga inversion sling sold internationally and loved by yoga students worldwide..
  • Pro-grade anchoring, developed for yoga trapeze, suspension trailers and can also be used with rings, battle ropes, yoga swings, boxing equipment, for indoor or outdoor use..
  • Max strength, 2 anchor, 2-bolt design, this model is rock solid and secure for the toughest of workouts..
  • All hardware included, product includes 2 anchors, 4 wood lag bolts, 4 concrete expander bolts so you’ll have everything you need whatever surface you choose to mount it to..
  • Durable design with galvanized steel and a polished finish, it safely supports up to 300lbs, base diameter 4.8" wide by 3.3" height. Solid and strong once properly installed..
Check Stock

ENO, Eagles Nest Outfitters Deluxe Hammock Hanging Kit, Take Your Hammock Inside, Charcoal

  • Bring the outdoors in: When you have the hammock itch, but the weather is crummy, create your own relaxation station inside with the Deluxe Hammock Hanging Kit.
  • Master the art of lounging: Simply install the 2 anchor bolt hangers with the lag screws and washers to the wall studs.
  • Clip your hammock (not included) to the hangers and let the relaxing begin.
  • Trustworthy material: Falling is not an option, unless it's to sleep.
  • The Indoor Hanging Kit features sturdy 6061 anodized aluminum hardware and is designed to support up to 250 pounds.
  • The full hanging experience: Every kit includes 2 anchor bolt hangers, 2 lag screws, 2 washers, 4 bolts and a detailed installation guide.
  • ENO gives back: ENO loves the outdoors and shows it by donating to organizations that preserve our wild places.
Check Stock

Loboo Idea Speed Out Screw Extractor Drill Bits Tool Set Broken Damaged Bolt Remover Guide Set Broken Easy Out Fastener Kit (5 Pieces, HSS 4341# Silver)

  • H.S.S 4341 Material: Loboo Idea stripped screw extractor is made of high quality H.S.S 4341 material, has 63-65 HRC hardness which is harder than most of other similar products. Durable and solid, suitable to removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts. Best gift for any craftsman..
  • Multi Purpose: 5 different sizes of bits (#0, #1, #2, #3, #4) are included in package of stripped screw remover kit and #0 is a gift provided for extra using. All is for ensuring that the screw extractor kit can meet all of your needs. Great for removing stripped, broken head, rusted, unscrew, free-spinning and deck screws or bolts..
  • Easy to Use: 3 simple steps: 1. Drill out, 2. Flip Bit, 3. Extract. Just no other tools needed but a drill, select a smaller bit than the damage screw, you can easily remove the screw. Note: please make sure to run the drill in reverse during the process..
  • Wide Application: The screw and bolt extractor can work on Allen bolts, Machine Screws, Lag Bolts, Wood Screws, Hex Bolts, Sheet Metal Screws, Rounded Bolts to name a few. Meanwhile, comes with a box which make it so portable for easy carrying..
Check Stock