Reviews Telescoping Feeler Gauge

Engine Timing Light with Feeler Gauge 32 Blades,Inductive Timing Light Gun Timing Light Ignition Testers Engine Ignition Coil Tester for Car Motor Vehicle Motorcycle Marine Lawnmower Measuring Gap

  • ...ength Cables Easy Connect To Car's Engine Bay★ - Sensor Clips Cable length up to 4.41ft .Never worry about the length of the cable is not long enough.Adapts to all kinds of 12V battery for automobiles, motorcycles, ATVs, personal watercraft, RVs, boats, airplanes, golf carts, lawn mower, etc ..
  • ★ Stainless Steel Feeler Gauge As Bonus★ - Use feeler gauge to measure gap.This is flexible easy to get into all places. Blades are able to be together or can unscrew finger nut to take feeler out. 2 Different units of measuring: Dual marked metric and imperial, 0.0015 in/ 0.04 mm to 0.035 in/ 0.88 mm, the numbers of size are etched into feeler gauge for easy identification.Perfect for setting lifter, sparking plug, points gap etc. With anti-rust oil on feeler gauge to prevent rust..
Check Stock

StewMac String Action Gauge And Ruler Metric Stainless Steel - Designed by StewMac The Original measuring tool for acoustic and electric guitar and bass setup

  • Quality material: these guitar gauge set is made of stainless steel with rounded off edge, rustproof and corrosion-resistant, won't scratch or hurt....
  • Foldable feeler gauge: the feeler gauge applies tempered steel, measurement ranges from 0.0015 inch/ 0.038 mm to 0.035 inch/ 0.889 mm, a common....
  • Understring radius gauge: comes in 9 sizes: 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch, 20 inch.
  • String action gauge ruler: the pocket-sized gauge ruler is marked with metric and imperial scale respectively on 2 sides, can be applied to measure....
  • Notched radius gauge: includes 2 narrow radius gauges and 2 wide radius gauges in 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 20....
Check Stock

uxcell 0.02 to 1mm Thickness Gap Metric Filler Feeler Gauge 6 Long

  • Total Size : 155 x 15 x 7mm / 6" x 0.6" x 0.28" (L*W*T).
  • Thickness (mm) : 0.02, 0.03, 0.04, 0.05,0.06, 0.07, 0.08, 0.09, 0.10,0.15, 0.20, 0.25, 0.30, 0.40, 0.5, 0.75, 1.00.
Check Stock

Wokape 6Pcs 5 Sizes Stainless Steel Radius Gauge with Feeler Gauge Kit, 5 Sizes Metric and Imperial R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25/ R26-80 Arc Fillet Concave Convex Gap Measuring Tool

  • 【What You Get】 ------ In this kit, You will get 5 different Sizes Stainless Steel Radius Gauge, Including R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25/ R26-80 , Each sizes has 1Pcs. These Radius Gauge can meet all your various need. With Stainless Steel Feeler Gauge Dual Marked Metric (0.04-0.88 mm, 32 Blades)..
  • 【High Quality】 ------- This radius gauge is made of high quality stainless steel, durable, high hardness and resistant to rust. There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that..
  • 【Stainless Steel Radius Gauge Excellent Design】------- The 360-degree Locking Screw design allows you to unfold or fold it easily. Each leaf is clearly marked, convenient to identify which leaf you need..
  • 【 Stainless Steel Feeler Gauge Sizes 】------- Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88. Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035..
Check Stock

Stainless Steel Feeler Gauge Universal Standard SAE and Metric Offset Valve Thickness Gauge 32-Piece Blade Tool for Measuring Gap Width/Thickness

  • 【EASY TO USE AND CONVENIENT】Made of high quality stainless steel, each measuring feeler gauge has 32 blades thickness.
  • Foldable, easy and convenient to take and store. Easily measure gap widths with the ABN Valve Offset Feeler Gauge. It is great for use on guitars, engines, and so much more. Includes metric and inch sizes etched on each blade..
  • 【BUILT TO LAST】Constructed from hardened tempered steel with a lube oil coating to prevent pitting and corrosion.
  • Each blade has sizes laser etched for easy identification.
  • Blades are bound within a blade protector to prevent loss of individual blades.
  • 【EASY IDENTIFICATION】 dual marked metric and imperial, 0.0008 inch/ 0.02 mm to 0.040 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • 【METRIC SIZES (mm)】0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.38, 0.40, 0.45, 0.50, 0.55, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 1.00 mm.
  • 【INCH SIZES(inch)】0.0008, 0.0012, 0.0015, 0.002, 0.0025, 0.0028, 0.003, 0.0036, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.015, 0.016, 0.018, 0.020, 0.022, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.034, 0.036, 0.040 Inches.
Check Stock

Rannb Plastic Feeler Gauge 0.05mm to 2mm Metric Gap Measuring Tool 20 Leaf

  • ⭐ Package Content - 1pcs x Feeler Gauge.
  • ⭐ Used for measuring of slot width, gap hole and etc..
  • ⭐ Each Leaf Size: 94mm/3.7" x 23mm/0.9" (Max.L x Max.W).
  • ⭐ Made of durable plastic.It is light weight and be easily carried in your pocket..
  • ⭐Metric sizes (mm): the 20 leaves feeler gauge owns 0.05mm/0.1mm/0.15mm/0.125mm//0.2mm/0.25mm/0.3mm/0.35mm/0.4mm/0.5mm/0.6mm/0.7mm/0.8mm/0.9mm/1mm/1.1mm/1.4mm/1.5mm/2.0mm.
Check Stock

15 Pieces Guitar Luthier Tools Set Including Guitar Radius Gauge, String Action Ruler Gauge, 32 Blades Feeler Gauge, Guitar Notched Radius Gauges for Guitar and Bass Setup

  • Quality material: these guitar gauge set is made of stainless steel with rounded off edge, rustproof and corrosion-resistant, won't scratch or hurt your hands, durable for long-term use.
  • Foldable feeler gauge: the feeler gauge applies tempered steel, measurement ranges from 0.0015 inch/ 0.038 mm to 0.035 inch/ 0.889 mm, a common distance measuring tool for guitar spacing , the chrome plated main shaft makes it easy to clean up.
  • Understring radius gauge: comes in 9 sizes: 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch, 20 inch.
  • String action gauge ruler: the pocket-sized gauge ruler is marked with metric and imperial scale respectively on 2 sides, can be applied to measure string height, bridge saddle height, saddle slot depth, pickup polepiece height, fret slot depth and nut height.
  • Notched radius gauge: includes 2 narrow radius gauges and 2 wide radius gauges in 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 20 inch radius, stays parallel to the fingerboard, quickly and accurately find the curvature of a fingerboard or bridge with these radius gauges without taking the strings off.
Check Stock

CAMWAY Digital Caliper Waterproof + 32PCS Feeler Gauge, Digital Caliper 150 mm,6 Inch Stainless Steel Electronic Vernier Caliper Fractions/Inch/Metric Measuring Tool

  • ... for differential measuring,The smart design of the durable and portable Caliper allows you to set zero by a button and start a new measurement at any point of the Caliper scale,Specially,The Stainless Steel Digital Caliper helps you get precise results quickly and easily on The large LCD display Screen.
  • 【Included Feeler Gauge】With 1 x Electronic Digital Caliper，1 x Sturdy Plastic Case，1 x Extra LR44 Battery，1 x Mini Screwdriver，1 x User Manual,1 x Feeler Gauge(Dual marked metric and imperial the specification of every blade was clearly marked on the Stainless Steel Feeler Gauge surface with laser technology, conveniently for measuring the thickness of tappet clearances, spark plugs gaps, bearing clearances and piston ring gaps.).
Check Stock

Edward Tools Harden 32 Piece Feeler Gauge Set - Metric/Inch - (0.04-0.88 mm) - Thickness Gauge Measuring Tool for Spark Plug, Guitar, 3 D Printing - Metal Shims - Easy Read Numbers (1)

  • Easy to read gap measurements includes mm and Inch sizes.
  • Feeler Size for mm 0.04,0.05,0.06,0.08,0.10,0.13,0.15,0.18,0.20,0.23,0.25,0.28,0.30,0.33,0.35,0.38,0.40,0.43,0.45, 0.48,0.50,0.53,0.55,0.58,0.60,0.63,0.65,0.70,0.75,0.80,0.88+0.25mm Copper Sheet.
  • Feeler Size for Inches - 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035.
  • Multi use gap measuring tool - Works as spark plug measuring tool, guitar gap tool, metal shims, 3 D printing thickness gauge.
  • Lifetime Warranty - We guarantee this tool for life. Note - this feeler gauge comes with anti rust oil that may get on your fingers when first measuring.
Check Stock