Reviews Teflon Stirring Rod

Rheem AP12938 Anode Rod 0.625-Inch Diameter by 42-Inch long Aluminum by Rheem

  • ABOUT FLUID’S MAGNESIUM ANODE ROD KIT is the fastest and best choice to prevent your water heater from dissolving itself from the inside out! With....
  • FITS: Almost all water heaters including.
  • Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾" NPT Anode Rod....
  • LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-By-Step instructions. Our Licensed Plumbers and Instructors have decades of experience. They....
  • NO LEAKS: You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon....
  • WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four....
Check Stock

Azzota PTFE Stirring Shaft with Foldable Paddles for stirrers, 14\ 350mm

  • PTFE Teflon Stirring Shaft with Foldable Paddles.
  • Shaft diameter: 8mm, Shaft length: 14"/350mm.
  • Paddles maximum diameter: 80mm (fully extended).
  • Polytetrafluoroethylene (PTFE) Anti-corrosion.
Check Stock

Slendor Magnetic Stirrer SH-2 Hot Plate Mixer Max 520℉ Lab Hotplate Stirrer 2000 RPM Stir Plate with Thermometer, Stirrer Bar and Support Stand

  • Adjustable Stirring Speed -- There is a speed regulating device at the bottom of the SH-2 magnetic stirrer hot plate. Rotate clockwise to increase the stirring speed, and counterclockwise to decrease. Adjust as needed. The max stirring speed is up to 2000RPM..
  • Rapid Heating -- Heating Power: 180W, Max Temp: 520°F. The magnetic hotplate stirre can stirrer and heat at the same time. Included 1 inch Teflon coated magnetic stirrer bar and thermometer, which can be used to display the temperature during use..
  • Advanced Material -- The magnetic stir plate is made of advanced materials, resistant to high temperature, abrasion, and chemical corrosion. Each stir hot plate stirrer has been tested and inspected, and the quality is guaranteed..
  • Widely Used -- The magnetic heated plate is suitable for scientific research institutions, industry, agriculture, laboratories and universities. Tips: work continuously for 4 hours in high-speed state and 8 hours in medium-speed state..
  • Quality Assurance -- The professional magnetic hotplate stirrer has undergone strict quality inspection and can operate stably for long time. If you have any questions about the lab hot plate, please contact the seller customer service at any time..
Check Stock

HIBATUL INC Pack of 4 Lab Glass Stirring Rod 6 inch (150mm) Long, 0.25in Diameter with Both Ends Round for Science, Lab, Kitchen, Science Education

  • Length: 150 mm (6 Inch) in length glass stirring rods.
  • Smooth: Each glass stirring rod has rounded and smooth ends..
  • Durable and Sturdy: Made of solid glass and built to stand the test of time..
  • Multufunctional: Glass stir rod, used in mixing chemicals and liquids like drinks or in the kitchen.
Check Stock

HIBATUL INC Pack of 6 Lab Glass Stirring Rod 6 inch (150mm) Long, 0.25inch Diameter with Both Ends Round for Science, Lab, Kitchen, Science Education

  • Length: 150 mm (6 Inch) in length glass stirring rods.
  • Smooth: Each glass stirring rod has rounded and smooth ends..
  • Durable and Sturdy: Made of solid glass and built to stand the test of time..
  • Multufunctional: Glass stir rod, used in mixing chemicals and liquids like drinks or in the kitchen.
Check Stock

MXBAOHENG Pneumatic Mixer 5 Gallon Handheld Air Agitator Paint Mixer with 10CM Diameter Aluminum Alloy Impeller for Dye/Resins/Ink Mixing

  • 【Three-cylinder pneumatic motor】The motor speed is adjusted by the air regulating valve. The higher the air pressure, the faster the speed. Equipped with a silencer: it can minimize the sound of the mixer (the noise level of the mixer is related to the opening degree of the air regulating valve)..
  • 【Parameter】Stirring rod length: 40cm, Working pressure: 6-8MPa, Power: 1/8HP, Speed range: 50-2600RPM. It needs to be used in conjunction with an air compressor. Suitable for Air compressor: power: above 3kw, working pressure: 4~6 standard atmospheric pressure (58.78PSI~88.18PSI)..
  • 【Load Safety】It can decelerate or stop automatically according to load changes, and can automatically recover when load decreases.
  • it can be overloaded, and it will stop running if overloaded for a long time, without damaging, it has a self-cooling effect..
  • 【Closed Design】 Environment friendly pneumatic mixer, can be used in damp, dust and other harsh environments. Working temperature: 10-65 ℃, can be used continuously for 24 hours..
  • 【High Quality】Explosion-proof, small size, light weight, simple operation, the stirring rod and the stirring impeller are corrosion resistant, acid and alkali resistant, removable, etc..
Check Stock

Ciieeo Drill Mixer 2pcs Drywall Even Mixer Heavy Style Standard Supplies Rods Paddle for Part Resin Mixing Drills- Stirring Tools Drills Tool Mud Portable Small Steel Cement Drill Plastering Stick

  • CEMENT MIXING STICKS-- ??Made of premium carbon steel material, and wear- resistant to use, serving for long time..
  • PAINT CEMENT PLASTER-- Stainless Steel Stirring Rod Paint Cement Plaster, Professional and practical design, beautiful appearance, easy to carry and use, suitable for a wide range of applications..
  • RESIN MIXER EPOXY MIXER PADDLES-- Replace your old or broken drywall mud mixer with a new one..
  • OIL PAINT MIXING STICKS-- It is manufactured with professional technology to ensure the product can work for a long time..
  • CEMENT MIXER BLADES-- Paint Stirring Rod Concrete Mixing Rod, Suitable for mixing plaster, paint, epoxy,, and more. Can also be on small projects of mortar..
Check Stock

Graphite Stir Rod Stick Crucible Stir Rod Long Carbon Stirring Rod Graphite Crucible Stir Stick for Melting Casting Refining Gold Silver Copper, 12 Inch Length, 5/16 Inch Diameter (5)

  • Tips for applying: with good thermal conductivity, graphite is ideal for heat transfer with little heat loss, when applying our long carbon stirring rod to stir, you should use a thread to tie the graphite rod to the small iron bar or wooden chopsticks, to increase length and prevent burns, be careful to do that please.
  • Designed for: these graphite crucible stir sticks are designed for lab, for stirring liquid metals, melting, casting, refining metals such as gold, silver, copper and others, you can use these sticks to stir and help you with your casting projects.
  • Reliable material: graphite electrode rod is made of graphite, endowed with heat resistance, wear resistance and lubricity, has a feature of thermal conductivity, it is proper for eating transfer with uniform heating and needs less fuel, reliable and safe for you to apply.
  • Long enough: each of our crucible stir rod measures approx. 30 cm/ 12 inches in length, and 0.8 cm/ 5/16 inch in diameter, quite long for you to use, and it is approx. 0.2 in granularity, 1.75 in density, with careful procedures, durable to use.
  • Quantity of the package: there will be 5 pieces graphite stir rod sticks provided for you, sufficient quantity to meet your needs for daily use, replacement and sharing.
Check Stock

VEVOR SH-2 Magnetic Stirrer, 0-2000 RPM, 1000ml Mixing Capacity Laboratory Magnetic Stirrer Hotplate w/Stand, 180W Heating Power ＆ 380°C Max Heating Temperature, for Lab Liquid Mixing Heating

  • Rapid Heating Hot Plate: Heating power: 180W.
  • Max. Temperature: 716℉/380℃. The stainless steel heating plate features good thermal conductivity, enables fast cooling and uniform heating. Plus, made of high-quality stainless steel, this heating plate is not easy to rust or wear..
  • Stable & Stepless Stirring: Motor Power: 10W.
  • Stirring Speed: 0-2000RPM adjustable. This hot plate magnetic stirrer adopts stepless speed operation.
  • maximum 2000 RPM stirring speed gives a rapid solution mixing. A PTFE-coated stir bar helps to mix 1L liquid stably..
  • Accurate & Simple Control: Two adjusting knobs are designed on the control panel, allowing granular control of the stirring speed and heating temperature with great precision, simplifying the fine-tuning..
  • Adjustable & Secure Design: The adjustable support rod tightly secures the temp sensor at whatever height you need for your mixing containers. It also includes a built-in fuse to cut the power once approaching temperature overloading. 4 non-skid foot pads are also available for a more stable stirring action..
  • Diverse Application: This heating plate magnetic stirrer is mainly used for stirring or mixing fluid samples, and it is actively used in many industries, widely used for scientific research, laboratory stud....
Check Stock