Reviews Teflon Polyimide Tape

WOD FGCT50SW PTFE Teflon Tape for Vacuum Sealer Machine, 2 inch x 36 yds - Hand and Impulse Vacuum Sealers, Fits FoodSaver, Seal a Meal, Weston - Fibreglass Fabric with Silicone Adhesive

  • IDEAL REPLACEMENT FOR BURNT OUT TAPE FOR SEALING - The heating element of a vacuum sealer does not support deteriorated burnt out tape. The persistent attempts to accomplish sealing with the old distorted tape result in poor bag sealing and cause damage to the heating element sometimes. The Teflon Tape is a wise replacement to that and kills the barrier between the heating device and the bag. Tape is 3 TIMES LONGER than what is usually sold on Amazon!!!.
  • IMPREGNATED FIBERGLASS MATERIAL ENSURES DURABILITY - The impregnated fiberglass cloth is layered with high temperature silicone adhesive to withstand harsh environments and critical applications. The fiberglass cloth material consists of warp, fill yarns, chemical, electrical, and mechanical properties to ensure durability and make it resistant to high temperature, chemical, drug, and abrasion..
  • MESS FREE INSTALLATION AND FITS ALL MACHINES – The adhesive backing of this tape helps it to fit all vacuum machines. It is easy to peel off, dispense, and apply quickly over or under the wire for vacuum or impulse sealers respectively..
  • MULTIPLE APPLICATIONS - PTFE Teflon tape is used to insulate heat sealing machines, electrical devices, guide conveyor device, conveyor chute equipments, bearing surfaces, tab....
Check Stock

APT, 1 mil Thick Polyimide Adhesive Tape, HighTemperature and Heat Tape, for Masking, Soldering, Electrical, 3D Printer Application. (2\x 36 yds)

  • 【Wide Area of Applications】-Used for electronic products, soldering, circuit boards, manufacturing, fiber optics cable, insulating circuit boards, ground barrier & insulation for coils, 3D printing, high temperature sublimation powder coating, etc..
  • 【High Temperature】- APT Polyimide tape has highly excellent heat & solvent resistance. Minimal shrinkage after baking and clean removal, and also shows the great electrical insulation. It maintain high-temperature resistance as high as 400F (260℃)..
  • 【Clean Removal, No Residue】- Our high temperature tape can withstand up to 400F (260℃) degrees. Remove cleanly, leaves no residue..
  • 【No Shrinking, Curling, Or Lifter Edges】- Made with high temperature silicone adhesive and premium film. Our tape resists curling, shrinking, and lifted edges every time..
  • 【Trusted Every Where】- Our tape do not contain any harmful chemicals, and complies with RoHs & Reach requirements. It is rigorously tested and meets American Society for Testing and Materials D-5213 standard, for high performance every time..
Check Stock

Heat Tape for Heat Press, 6 Packs Selizo Heat Transfer Tape Heat Resistant High Temperature Tape for Sublimation on Coffee Mugs, HTV Craft on T-Shirt Fabrics

  • High Temp Tape - Selizo heat tape is compatible in a wide temperature range of up to 280°C (536°F), with the ability to maintain its unique combination of mechanical properties under the harshest of conditions, the high heat tape is great for applications where extremes of heat and vibration.
  • EXCELLENT ADHESION - The heat transfer tape made from polyimide film with silicone adhesive, it is easy to stick and not easy to break while peeling. Works well in coffee mug press, Heat press, T shirt application or other Thermal transfer printing.
  • LEAVES NO RESIDUES – Our heat resistant tape for heat press offers excellent resistance to no residue after peeling off. Even uneven surfaces can be easily wrapped with heat resistant craft tape.
  • APPROPRIATE SIZE - The heat resistant tape is 2/5 inches in width and 108 ft in length per roll. Not too wide nor too narrow. Long enough heat press tape can meet daily needs in different situations, such as keep your design in place when you making shirts and hats heat resist tape.
  • WIDELY USE - Heat tape for heat press is not only suitable for sublimation on coffee cups, but also ideal for heat transfer vinyl on T-shirts, pillows, clothing, fabrics. Great craft heat tape for all kinds of DIY projects.
Check Stock

Heat Resistant Sublimation Tape,Heat Vinyl Press Tape for Heat Transfer,High Temperature Tape for Soldering,Electronics Masking,Protecting Circuit Board Multi,Heat Resist Up to 482℉(24mm x 98ft x 2)

  • Material:Heat resistant tape is a Polyimide Polymers Film tape with silicone adhesive and high temperature resistant adhesive.It's really indispensable when sublimating and the tape can do the job smoothly..
  • Maximum heat resistance: 482 ℉ (250℃)，comes off clean，easy peal and no residue.Works well in protecting electronic products, electric motor, solder, painting, packing fixing, printing PCB board.
  • Package included:High temp tape comes with 3 different size that is fit for your masking, soldering, electronic repair .The width of the tape in variety width, 4.7 Inch(4 rolls ),7 Inch （3 rolls ）and 9.4 Inch（2 rolls ）.it is 30 meters (98 feet) long..
  • Transfer tape for vinyl.This heat transfer tape keep your design in place when you making shirts and hats,help to do heat transfer vinyl on a heat press..
  • Easy use: Superior performance of the heat resistant. Strong silicone adhesive is easy to stick and no residue after peeling off..
Check Stock

D.N. Industrial Grade Yellow Plumbers Teflon Tape, Gas Line Pipe Thread Tape, Twice Longer and Higher Density (1.3 g/cm3) Propane Yellow Tape Perfect for Gas Fittings (1/2\

  • Size and Quality: D.N. 1/2 inch yellow plumbers Teflon tape Thickness is: 0.004” (0.075mm), Temperature Resistance: -190°C to 370°C, Water pressure resistance:16MPa, Tensile strength: ≥8MPa, Elongation: ≥25%.
  • High density: Yellow teflon tape density is 1.3 g/cm3 ( gram per cubic centimeter).
  • Material: Our plumber’s tape is made of PTFE material, which has high sealing and durability and gets CSA 20755, UL MH25811 approved.
  • Each roll of yellow Sealant Tape has a width of 1/2 inch which is suitable for for gas fittings. The length of this gas seal tape Model is twice longer as the same models.
  • plumbing tape has a sealing function to prevent the leakage, Yellow gas Sealant Tape Perfect for gas fittings.
Check Stock

Weston Vacuum Sealer Pro Series Maintenance Kit (08-0501-W), Part Kit for 65-0101, 65-0201, 65-0401-W

  • One (10 mm) Teflon Tape for the vacuum sealer lid.
  • One (15 mm) Teflon Tape for the seal bar.
  • Replacement parts for Weston PRO-2100 (65-0101) and PRO-2300 (65-0201) Vacuum Sealers.
Check Stock

4 PCS Film Heater, Icstation PI Heating Film 12V 7W Adhesive Polyimide Heater Plate 25mmx50mm

  • 【Fast Preheating Speed】Uses polyimide as an insulator outside, and the thermo foil as an electric heating element inside. During normal operation once the interior is within operating temps, the temperature is very stable..
  • 【Extremely Thin】Lightweight, and flexible polyimide heaters can quickly provide heat to where it is needed. Widely used in electronics manufacturing, medical devices, scientific instruments..
  • 【Safe to Use】Polyimide film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability. Safe to use with stable performance..
  • 【Durable】Equipped with self-adhesive can be fixed on the item surface easily.They are formated through high temperature high-pressure and heat-sealing process..
  • 【12V Polyimide Heater Film】 Heating films can not control the temperature itself. You can use it with a temperature controller. Working Voltage: DC 12V, Power: 7W, Maximum Temperature: about 100℃..
Check Stock

DUPPCOS 6 Rolls Teflon Tape 1/2Inch(W) 520Inches(L), Plumbers Tape, Plumbing Tape, Sealant Tape, PTFE Tape, Sealing Tape, Perfect for Shower Head Water Pipe

  • [ High Quality ] DUPPCOS thread seal tapes are made of PTFE which has a good sealing capability and can resistant corrosion. Rated for temperatures ranging from -212° to 512°F..
  • [ Wide Application ] Plumbers thread tape are used in iron, brass, copper, aluminum, stainless steel, galvanized steel, polyethylene, polypropylene, PVC, CPVC, ABC, fiberglass and more..
  • [ Value Pack ] Each premium bag contains 6 rolls of plumbing tape, each roll measures 1/2inch wide and 520inches long. It's enough for you to use for a long time, you don't have to buy teflon tape again and again..
  • [ Great For DIY ] Wrap the tape around the threaded male end of the pipe or connector and screw it in. Keeps sealant tape dry and safe in a sturdy plastic case..
  • [ Long -Term Storage ] DUPPCOS Teflon tape are the best aging life of all plastics. Leftover sealant tape for plumber can be stored for many years. Don't worry about losing expiration..
Check Stock

PTFE Tape/Teflon Tape for Vacuum, Hand and Impulse Sealers (1/2-inch x 30 feet) - Fits FoodSaver, Seal A Meal, Weston, Cabella's by Impresa

  • 1/2" wide x 30 foot long Teflon tape / PTFE tape roll with adhesive backing. Fits virtually all FoodSaver, Weston, Cabella's, Nesco and Seal-A-Meal vacuum sealers, as well as most models of hand / impulse heat sealers.
  • Replaces deteriorated or burnt-out Teflon tape, which is a crucial barrier between the heating element and the bag. Old tape causes poor bag sealing and can lead to a broken heating element and a broken sealer.
  • Tape may be slightly wider and longer than necessary, allowing for broad compatibility. Strip should be replaced when appearing warn, discolored or if sealing isn't perfect.
  • Just peel tape from the roll and place on the correct area (you may need to clean the strip location before placing the new piece of tape). Over the wire for vacuum sealers, under the wire for impulse sealers.
  • Ideal for virtually all FoodSaver models including 4800, 2244, 3240, 4440, 4865, 3880, 3460, 2840, 3840, 3835, 2440, 2450, 2860, 2240, 2840, FM2000, FM2100, GameSaver, Professional, and many more. Great for Weston Pro 2100, 2300 and more. By IMPRESA (TM).
Check Stock