Reviews Taurus Slim Sights

Taurus 709/740 Slim with Laser IWB Leather in The Waistband Concealed Carry Holster CCW Black RH

  • Fiber Optic front sight for your Taurus G2C, G2S, G3 w/Original factory Metal sights , PT111 G2, PT140 G2, PT709, PT740, TX22.
  • The front sight comes with 3 fiber optic rods in green, red and orange so you can use any combination of color that you prefe.
  • They are machined from tough 7075 Aluminum Alloy and hard anodized and provide outstanding contrast in daylight..
  • The sight set comes with a new screw for the front sight.
  • The front sight is held in with a screw and thread locker and no sight pusher is used in the installation. The tools needed include a flat blade....
Check Stock

ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire

  • ...ate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not ....
Check Stock

Kosibate PU Leather Pancake Holster with Neoprene IWB Gun Holsters, Compatible with Glock 26 27 30 33, M&P Shield, XDs, Taurus PT111 Holster

  • 【MATERIALS】Pancake holster made of ultra-light PU leather and IWB gun holster made of Neoprene material. soft and breathable..
  • 【STURDY CLIP】:The clip has enough strength to stay in place even when drawing with one hand..
  • 【PANCAKE HOLSTER】Fits most full size, compact and sub compact in Glock 19 23 32 26 27 33 30 | M&P Shield, XDs, Taurus PT111, Slim 709, Beretta Nano, SCCY SKY 9mm, Ruger SR9, S&W M&P 9 Compact, Sig P320, Sig P250, Sig 224, Sub Compact, Beretta Px4 Sub Compact, Sprinfield XD9 Sub Compact, FNS 9mm Compact FNS 9C, XDM with 2-3" Barrel, H&K P2000 SK Sub Compact, H&K USP C-40, P30, Hi-Point Sub Compact..
  • 【IWB GUN HOLSTER】 Fits for GLOCK 26, 27, 29, 30, 39, 28, 33, 36, and 43 |S&W 9MM | M&P Shield in 9mm, .40, and .45 ACP | Ruger LC9 ,380 | Taurus Slim Line, PT111 | Springfield XD Series | Beretta | Bersa | Kahr Arms | Colt | Walther | and many more Compact Pistols..
  • 【KOSIBATE GUARANTEE】Kosibate offers life time warranty on our IWB gun holster, guarantee with 100% satisfaction service..
Check Stock

Kingslayer

  • ...or Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture.
  • 4 MOA. 5 Illumination Settings. Powered by a lithium CR2032 ....
Check Stock

Gun Them Down [Explicit]

  • ✅【0.96 in Installation Space Needed】TWO Installation requirements of the 3-in-1 green laser light combo: (1) 21MM Picatinny with slot.
  • (2) 0.96 inch Installation Space from slot to trigger guard..
  • ✅【Safe & Adjustable Laser Sight】Solofish Green and blue laser sight for glock pistol/rifle compatible with taurus g2c accessories. The safety output of the tactical red green laser beam is class: IIIA, .
  • ✅【Multiple Tactical Modes】 500 lm airsoft gun lasers light combo offers Steady/Strobe Gun light modes. Working modes: Steady/Strobe gun light, Pistol laser Only, Steady/Strobe Flashlight+ Gun Laser..
  • ✅【Rechargeable Built-in Battery】The handgun lights compatible with gun parts & airsoft accessories, it is powered by a built-in rechargeable battery. A full charge takes 1.5 hours by USB cable and providing 5hrs’ laser for gun, 1hrs tactical flashlight or 45 minutes gun light and laser sights. Power indicator light：Red light/Charging or low battery.
  • ✅【Durable Aluminum Alloy Design】The pistol flashlight laser combo is made of durable Alum....
Check Stock

Suppressor Height Sights Set, Suppressor Sights for Precise Targeting, Front and Rear Sights Compatible for Glock 17 17L 19 26 27 33 34 38 39 All Models Except 42 and 43.

  • 【Designed to Last】Made of tough and durable steel with a fortress finish coating for maximum protection. The matte black will reduce any glare with some standard sights. The front sight comes with a mounting screw and the rear sight has a co-witness setup combo, which improves stability and visibility during the day..
  • 【Higher Brightness & Precise Shooting】These suppressor height Glock sights set are raised up allowing you to see over the top through the window, which largely help increase higher brightness and precise shooting..
  • 【Special Three-dot Sight Design】Sits just high enough over the body to see but not overly high that it would take too much real estate in glass window. The front sight is slim and the rears are wide which are great for fast sight acquisition..
  • 【Easy to Install】These suppressor height sights set works well with all optics co-witness and is very easy to install. Step1.Loosen the allen head on the glock with the hex key allen wrench and then clean the holes up. Step2. Pull the hex nut screw off and install the front sight. Step3. Put your finger on the front sight and put the screw back. Step4. Slide and push the rear sight. Use the sight pusher tool if you rear sight is tight, do not try to use a hammer and punch..
Check Stock

NcStar Red Laser Sight with Universal Barrel Mount/Black ARLS

  • The all new Slim Line Green Laser by NcSTAR just made your setup a whole easier to use.
  • This Bright Green Laser is fully adjustable for windage and elevation.
  • Slim Compact design ensures that this Laser won't get in the way like other bulky laser sights.
  • The Click Push-Button tail cap switch provides instant on/off function with ease of manipulation.
Check Stock

Kingslayer [Blu-ray]

  • ...or Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture.
  • 4 MOA. 5 Illumination Settings. Powered by a lithium CR2032 ....
Check Stock

Swampfox Kingslayer Pistol Cut RMR Foot Print 1x22 Micro Reflex Dot Sights 3 MOA (Red Dot)

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • Does NOT fit glock with AFTERMARKET slide with optic cut. We have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon..
  • The included optic plate for glock also fits Taurus GX4, G3C & G3 with steel rear sights.
  • Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture. Fully windage and elevation adjustable and lockable.
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
Check Stock