Reviews Tapping Machine Instruction Manual

LESENBEAUTY Lymphatic Drainage Machine, 3 in 1 Electric Vacuum Therapy Machine with Heat

  • 【widely used】If the device cannot be turned on, please use it again after charged. Please refer to the product operation video and instruction manual on the product detail page to use the product. Our scraping massage tools are very light and easy to carry (wireless and portable). It weighs 350g, length 21cm(8.26inch), and is wide 4.2cm(1.65inch), it can run for about 4 hours, so it can be widely used at home, travel, and spa or salon. vacuum therapy machine for men or women.
  • The two digits on the left of the display represent the time, and the maximum can be set to 30 minutes.
  • the one digit on the right represents the suction, "1" is the minimum suction, "2" is the medium suction, and "3" is the maximum suction. Please operate the device as shown in the pictures and videos Patiently. 5 step operation process: 1. press to turn on, 2. time setting (MUST SETTING Minimum 1 minute), 3. choose suction level, 4. turn on the heating, 5. press "on/pause" button again.
  • 【massage】Our electric massage therapy cups are different from the wood therapy massage tools, it has three different massage modes (Heat - Vacuum - Gentle Massage) with three different sizes of prototype roller massage heads suitable for cellulite massager, face massager, lymphatic draina....
Check Stock

uxcell M8x1.25mm Straight 4 Flutes Metric Bottoming Taper Hand Taps 3pcs

  • Tap Size: M12 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Metric Machine Tap M3 Thread 0.5 Pitch H2 3 Flutes Hex Shank High Speed Steel

  • Tap Size: M2 x 0.4 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

Zinger Ionic Foot Bath Detox Machine System Chi Aqua Ionic Ion Foot Detox Bath Cleanse Machine with 1 Far Infrared+ 1 Detox Arrays+1 Wrist Strap+1 Power Cord+ Waist Belt+1 Travel Case

  • Professional foot detox bath machine system with multi detox function,with FDA certification.
  • Easy use, the Ionic foot bath detox machine includes detailed instruction manual step by step. Any question and detail information pls feel free to....
  • Functions:Enhance immune system,balance blood sugar,balance blood pressure,arthritis aches, rheumatoid,improve memory and sleep,significant pain....
  • Package includes: 1 far infrared+ 1 detox arrays+1 wrist strap+1 power cord+ waist belt+1 travel case + 1 instruction manual.
  • One year warranty covering defects in material and workmanship.Warm tips:1.Add salt:pls add salt little by little every time according to the display....
Check Stock

Nuk3y 9000 Series Grade 1 Heavy Duty Door Closer, Multi-Mount, Adjustable Size 1-6, ADA Compliant, UL Listed

  • HEAVY DUTY - ANSI/BHMA Certified A156.4 Grade 1 tested over 2 million cycles.
  • ADJUSTABLE - Fully adjustable power spring Size 1-6 to fit all type of door weight. Adjustable Sweep (Closing), Latching, and Backcheck to suit your needs.
  • ADA & UL/CUL LISTED - Meet ADA 5LBS opening force and UL10C for 3 hours fire rating.
  • HARDWARE - Self Tapping Screws, Machine Screw, Thru Nuts, Full Plastic Cover, Tri-Pack Multi-Mount ( Parallel, Regular, and Top Jamb arm) for arm installation..
  • EASY TO INSTALL - Installation instruction with detailed template included. Comparable to Norton 1600 Series.
Check Stock

Nuk3y 9000 Series Grade 1 Heavy Duty Door Closer Multi-Mount Adjustable Size 1-6 ADA Compliant UL Listed

  • HEAVY DUTY - ANSI/BHMA Certified A156.4 Grade 1 tested over 2 million cycles.
  • ADJUSTABLE - Fully adjustable power spring Size 1-6 to fit all type of door weight. Adjustable Sweep (Closing), Latching, and Backcheck to suit your needs.
  • ADA & UL/CUL LISTED - Meet ADA 5LBS opening force and UL10C for 3 hours fire rating.
  • HARDWARE - Self Tapping Screws, Machine Screw, Thru Nuts, Full Plastic Cover, Tri-Pack Multi-Mount ( Parallel, Regular, and Top Jamb arm) for arm installation..
  • EASY TO INSTALL - Installation instruction with detailed template included. Comparable to Norton 1600 Series.
Check Stock

6Pcs 2-in1 Combination Drill and Tap Set TOPINCN Titanium Coated HSS Metric Hex Shank Screw Taps Tool Set

  • ¡¾HIGH QUALITY¡¿ - 100% brand new and high quality. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • ¡¾USE FOR TAPPING VARIOUS THREADS¡¿- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
  • ¡¾SPIRAL FLUTES¡¿ - Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • ¡¾SMOOTH TAPPING¡¿ - They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
Check Stock

uxcell Thread Milling Taps 7/16-14 UNC High Speed Steel HSS 4 Straight Flutes Machine Screw Thread Threading Tap 5 Length Extra Long

  • accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
  • High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping..
  • Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min.
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
Check Stock

uxcell Thread Milling Taps 3/8-24 UNS High Speed Steel HSS 3 Straight Flutes Machine Screw Thread Threading Tap 5 Length Extra Long

  • accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
  • High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping..
  • Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min.
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
Check Stock