Reviews Tapping Drill

ATOPLEE 1pc Metric HSS 6542 Left Hand Thread Tap (M16x2.0)

  • {High Quality Material} The tap is made of HSS6542 material, which is stronger and more durable than ordinary taps..
  • {Size}Total Length:101mm,Shank Diameter:12mm,Pitch:2mm..
  • {Note}This is a small straight groove tap, which can be used for tapping of round through holes or shallow blind holes. Pay special attention to not being used for blind hole tapping..
  • {Widely Usage}Tapping can be done on stainless steel, iron, aluminum, copper, general steel and other materials. It can be used with manual equipment or special processing consoles, such as tapping machine, driller's integrated bench drill, CNC numerical control lathe, machining center, etc..
  • {Package Included} 1x Left hand Thread Tap.
Check Stock

6Pcs 2-in1 Combination Drill and Tap Set TOPINCN Titanium Coated HSS Metric Hex Shank Screw Taps Tool Set

  • ¡¾HIGH QUALITY¡¿ - 100% brand new and high quality. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • ¡¾USE FOR TAPPING VARIOUS THREADS¡¿- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
  • ¡¾SPIRAL FLUTES¡¿ - Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • ¡¾SMOOTH TAPPING¡¿ - They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
Check Stock

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

  • SAE and Metric Sizes - This drill tap kit includes SAE and metric sizes and is the most commonly used screw tapping. 6pc SAE includes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC, including 6 metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5..
  • Drill Tap Bits Set - Each tap drill has its corresponding size in the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
  • High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
  • Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..
Check Stock

DAREX Drill Sharpener V-390

  • Forget the days of trying to find the correct angle by hand or accidentally tapering the edge of your tools. Improve the utilization of drill bits, solve the troubles you have been buying drill bits, save time and save money..
  • Portable tools that you can carry around and don't take up space in your backpack..
  • Made of high-quality ABS plastic and brown corundum grinding wheel, High hardness, rustproof, solid and durable,self-centering point, do not need assistant center drilling or center punching..
  • Compact and portable drill grinding tool, Use this drill bit sharpening tool with your power drill to keep bits sharp and ready for use,With simple structure and great material, the grinding wheel drill bit has good sharpening effect, saving much effort. Great for fast drilling, tapping,etc. And Fast replacement composite cone, uses drill edged principle..
  • This diamond Drill Bit Sharpener is mainly used for grinding iron drills, not suitable for other high hardness drills.
Check Stock

Makita A-97748 1/8\ Black Oxide Drill Bit, 1/4\ Hex Shank

  • [Specifications and packaging]: 33 Piece hex shank twist drill bit set.Plastic case..
  • [Fitment]: Wood drill bit set for metal/wood/plastic sink. Suitable for home DIY, and general building/engineering use..
  • [Material]: Impact drill bits use classic high speed steel construction with titanium coating for capability and durability..
  • [Advantage]: Hex shank twist drill bit set drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • [Quick Replacement, Safe Installation]: Titanium drill bit fits into all power tools more easily and securely, specially for locking into quick change chuck. We also offer a quick-change adapter to better quick change..
Check Stock

Glarks 120Pcs #8 x 5/8\ Phillips Modified Truss Head Wood Screws, Black Zinc Plated Carbon Steel Self Tapping Sheet Metal Screws Set

  • ♛【Package Includes】: You'll receive 120pcs #8 x 5/8" modified truss head wood screws in total. Sufficient quantities are enough for your different daily use at home and office..
  • ♛【High Quality Material】: Our truss head self tapping wood screws are made of high quality carbon steel, black zinc plating gives screws higher corrosion resistance and rust resistance for long service life, not easy to break or deform, and can fit different indoor and outdoor environments..
  • ♛【Sharp Tip Design】: This phillips truss head self tapping screw with sharp tip and deep thread can easily penetrate a variety of materials and achieve tight connecting, which provides better holding power to get the job done easily..
  • ♛【Easy to Use】: No need to pre-drill or drill hole, simply use self-tapping screw to rotate into the product without using nut to cooperate. It can reach a remarkable effect of connecting and fastening..
  • ♛【Wide Application】: These screws can be applied to plastic, wood and soft materials, suitable for repairing fasteners in shops, garages or household furniture. Mainly used in manufacturing, construction, engineering, machinery and other industries..
Check Stock

Glarks 120Pcs #8 x 1-1/2\ Phillips Modified Truss Head Wood Screws, Blue Zinc Plated Carbon Steel Self Tapping Sheet Metal Screws Set

  • ♛【Package Includes】: You'll receive 120pcs #8 x 1-1/2" modified truss head wood screws. Sufficient quantities are enough for your different daily use at home and office..
  • ♛【High Quality Material】: Our truss head self tapping wood screws are made of high quality carbon steel, blue zinc plating gives screws higher corrosion resistance and rust resistance for long service life, not easy to break or deform, and can fit different indoor and outdoor environments..
  • ♛【Sharp Tip Design】: This phillips truss head self tapping screw with sharp tip and deep thread can easily penetrate a variety of materials and achieve tight connecting, which provides better holding power to get the job done easily..
  • ♛【Easy to Use】: No need to pre-drill or drill hole, simply use self-tapping screw to rotate into the product without using nut to cooperate. It can reach a remarkable effect of connecting and fastening..
  • ♛【Wide Application】: These screws can be applied to plastic, wood and soft materials, suitable for repairing fasteners in shops, garages or household furniture. Mainly used in manufacturing, construction, engineering, machinery and other industries..
Check Stock

Acrux7 14mmx1.5 HSS Right Hand Thread Tap, Metric Thread Tap, Thread Milling Tap M14 X 1.5mm Pitch

  • 【MATERIAL】-Made of made of high speed steel and are good for most general purpose applications,offering a combination of hardness and toughness for wear resistance.
  • Standard thread design,clear and tidy,provide rapid chip removal for efficient threading.
  • 【FEATURE】-Straight flute taps are used for through hole and shallow blind hole tapping.
  • Adjustable forward and reverse,ratchet rotation,compact and convenient.
  • 【NOTE】-Before tapping,confirm whether the diameter of the round hole is appropriate.
  • If the hole is too small for tapping,the tap will wear out more unnecessary,which will increase the risk of tap breakage.
  • 【APPLICATION】-The taps are used formanual equipment or special processing consoles,such as tapping machines,drill-in-one bench drills etc.
  • With this tap,you can finish tapping on stainless steel,iron,aluminum,copper,general steel and other materials.
Check Stock

Lisle 58850 Oil Pan Plug Rethread Kit

  • This set includes a piloted drill, spring-loaded tapping tool and 5 magnetic drain plugs.
  • The unique tapping tool ensures the new thread will be perpendicular to the gasket surface to prevent leakage.
  • Works on soft steel and aluminum oil pans with 1/2 inch, 12 mm and 14 mm threads.
  • Can be used on the vehicle when room permits.
Check Stock