Reviews Tank Fitting Valve

IBC Tote Fittings with Valve Tote Adapter 2.95' Coarse Thread Tote Ball Valve Heavy Duty Tote Tank Drain Ball Valve Connector for Water Liquid Container NPT DN50

  • S60X6 Coarse Thread – The IBC tank adapter has a brass tap and a detachable tap fitting, suitable for most ibc standard containers, where the support thread is s60x6 coarse thread. The diameter is 60mm (23.36in) and the spacing is 6mm (0.24in), please check carefully for any problems before purchasing.
  • High Quality Brass & NO Leaking – The IBC tote adapter is made of high quality brass, which is resistant to acid and alkali, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
Check Stock

Class A Customs 48 Gallon RV Waste Black Water Holding Tank 56 x 30 x 9 WT-4800

  • 48 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

IBC Tote Fittings, IBC Tote Adapter, 1/2' IBC Tote Tank Adapter Winterizing with 2' Coarse Thread for 275-330 Gallon, Leakproof Garden Hose Faucet Connector Replace Valve Set with Brass Spigot

  • S60X6 Coarse Thread – The IBC tank adapter has a brass tap and a detachable tap fitting, suitable for most ibc standard containers, where the support thread is s60x6 coarse thread. The diameter is 60mm (23.36in) and the spacing is 6mm (0.24in), please check carefully for any problems before purchasing.
  • High Quality Brass & NO Leaking – The IBC tote adapter is made of high quality brass, which is resistant to acid and alkali, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
Check Stock

Camco RhinoFLEX Clear 45 Degree RV Sewer Hose Swivel Fitting- Allows You to See When Tank is Empty Odor Protection Durable and Secure Connection 39847

  • Clear fitting to see if holding tank is empty.
  • Swivel lug and bayonet fitting for secure connection.
  • Connect sewer hose to your RV’s waste valve fitting.
Check Stock

Lemfema Propane Refill Adapter Hose 3 FT Stainless Steel Extension Hose with ON-Off Valve for 1 lb Propane Gas Tank Cylinder Bottle QCC1 / Type 1 Propane Bottle Connector

  • 【Outstanding Refilling】Works for refilling 1 pound tank green propane cylinder from 20 pound tanks, great money saver.
  • 【On/off Valve】 A modified valve makes it easier to shut off the propane supply when the 1 lb. tank is full. No need to shut off large gas....
  • 【Big Improvement】 3ft flexible hose makes refilling process easier and more convenient than the short adapter.
  • 【Ease of Use】 You just need to turn the 20lbs tank upside down to get the liquid propane to the bottom.
  • 【Premium Quality】Durable rubber and well sealed 90 degree angle brass fitting ensure leak-free use & safety.
Check Stock

Boltigen R134a Refrigerant Tank Adapters, R12 R22 to R134a Adapter Connector, 1/2 to 1/4 Flare R134a Vacuum Pump Adapter Fittings with Valve Core Remover

  • 【R134a Adapter Kit】R12 R22 to R134a adapters set includes: 2 pcs 6015 R134A Brass Refrigerant Tank Adapter to R12 Fitting Adapter 1/2 Female ACME to 1/4 Male SAE Flare, 2pcs 6014 Vacuum Pump Adapter 1/4 SAE Flare Female to 1/2 Acme Male, 1pc valve core remover..
  • 【Application】R134a tank adapters are suitable for charging and service tools, can be applied to vacuum pump, can tap, hose or oil injector to adapt between R12, R22 system and R134A systems..
  • 【Material】These refrigerant tank adapters are made of solid brass, durable and sturdy to use, corrosion resistant, not easy to rust, has a long service life..
  • 【Easy to Install】R12 R22 to R134A refrigerant tank adapters are quick and easy connection and disconnection, you can just hand tighten it and get a good seal, O-ring seal with no-leak connection, the valve core remover help you to assemble and disassemble valve core easily..
  • 【Warranty】This R134a Vacuum Pump Adapter comes with a 1 year lifetime limited warranty. If you are not happy with the product or something goes wrong with the product, you can return it for full refund..
Check Stock

Youxmoto R134A Self-Sealing Can Tap Valve Refrigerant Dispenser Tool with Tank Adapter for 1/4 and 1/2 inch AC Freon Charging Hose for Air Conditioner Manifold 2PCS

  • Wide compatibility: Comes with R134A can tap refrigerant dispenser and tank adapter, compatible with both 1/4" and 1/2" female-fitting AC charging....
  • R134A Can Tap: Our R-134a brass automotive air conditioning dispensing valve connects all R-134a freon cans with 1/4" acme threads to all auto R-134a....
  • R134A Tank Adapter: Includes an extra R134A refrigerant tank adapter, 1/4" acme female x 1/2" male flare, connects 1/4" male can tap to 1/2" female....
  • Premium quality: This R134A refrigerant self-sealing can tap with adapter is made of heavy-duty brass alloy for durable using, with screw-on design....
  • 1 Year Warranty: This self sealing r134a can tap with brass tank adapter comes complete with 12 months warranty. If the dispensing valve fails or any....
Check Stock

Dbgogo CGA-320 Keg CO2 Regulator, Brewing Dual Stage Gauge Beer Kegerator Pressure Regulator with 1/4” & 5/16” Quick Disconnect Barb Connectors and Safety Pressure Relief Valve for Co2 Cylinder Tank

  • Heavy duty CGA-320 beer keg co2 regulator, no leaks: upgraded brewing beer kegerator pressure regulator features a heavy-duty forged brass body for sturdiness and durability. CGA-320 co2 regulator fits all standard co2 cylinders tanks with CGA-320 outlet. CGA320 cylinder fitting features a hexagonal design for easy tightening with an adjustable wrench. just put a white sealing washer into gas cylinder connector, which can prevent connection between co2 cylinder and keg regulator from leaking..
  • Stable, easy-to-read, drift-free dual gauge: Dbgogo co2 tank regulator features dual pressure gauges, 0-60 psi output pressure gauge displays amount of co2 pressure provided to beer keg, 0-3000 psi cylinder pressure gauge displays amount of co2 pressure left in cylinder. dual pressure gauge regulator can accurately and stably monitor working pressure in home-brewed beer carbonation system at any time, and reading is simple, which is very suitable for brewing carbonated beverages, beer and tea..
  • Easy to manually adjust system pressure, locking ring maintains stable pressure setting: co2 regulator has 2 manual adjustment knobs to control entire brewing system pressure. you can set beer keg pressure by slowly turning pressure adjustment knob in “+” direction. tu....
Check Stock

WADEO Rain Barrel Spigot, Brass Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting-Black

  • Two installation methods: Brass bulkhead fittings front mounting and back mounting. Designed for irrigation with Rain Barrel, Not for Portable Water, Not Lead Free Compliant..
  • Heavy Duty 3.2 oz Solid Brass Bulkhead Fitting, 1/2" Female to 3/4" Male water tank connector bulkhead tank fitting. Heavy duty 3/4"water outlet no kink quarter turn solid brass ball valve can conntect with garden hose.
  • Bulkhead fittings need 1 inch diameter holes to install. Fit up to 0.78 inch thickness wall..
  • Tools Needed for Installation: Electric drill, 1 inch hole saw, and pipe wrench or adjustable wrench..
  • Two washers (6.8mm between inner ring and outer ring), which can help you install the rain barrel spigot conveniently and effectively prevent leakage..
Check Stock