Reviews Tactical Scope Rings For Picatinny Rail

Monstrum Picatinny/Weaver Rail Mount for Marlin 336/1894/1895 Series Lever Action Rifles with Integrated Level Bubble | 0 MOA

Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles.
Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
Integrated level bubble built into the rear of the rail to check for consistent vertical alignment of your rifle.
All Monstrum scope mounts and accessories come with a lifetime guarantee.

Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch).
With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily..

Built specifically for long range scopes - 6-24x magnification scopes and above - with 3 inches of spacing between scope rings to accommodate scopes....
Lightweight one-piece scope mount for mounting standard 1 inch diameter tube rifle scopes - with weight comparable to a set of lightweight rings,....
Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle....
2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.

Tactical rifle scope providing crystal clear targeting at 1-4x magnification, with a 20mm objective diameter and an eye relief of 3.5-3.8 Inches.
Glass rangefinder reticle for on-the-fly range estimation and long distance targeting.
Lever controlled reticle illumination in both red and green with multiple brightness intensities.
Product Bundle includes Monstrum H-Series One Piece Offset Scope Mount.
comparable in weight to a pair of scope rings while maintaining the added rigidity and convenience of a one piece mount.
Includes hardened steel Torx mounting hardware for mounting to any Picatinny rail platform..
Product bundle includes a matching set of Monstrum Rubberized Flip Up Lens Covers. Spring loaded flip-up lens covers that rubberized sleeves that conform neatly around your rifle scope tube, protecting your expensive optics from dust and abrasion.

XTR SIGNATURE RINGS – These rings were designed for the tactical shooter and deliver plenty of holding power with less weight..
IDEAL MOUNTING ACCESSORIES – These mounting rings let you virtually sight your gun without moving the scope adjustments..
SIGHT MOUNT – There is no need for tapered bases or shimming for thousand-yard shooting with these mount rings..
TACTICAL MOUNTING RINGS – Count on the revolutionary Pos-Align Inserts technology in a tactical ring configuration for centering your scope..
RUGGED BURRIS RINGS – Save weight with these aluminum tactical rings that mount on any Picatinny and most Weaver style rails..

1.35 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
34 mm diameter rings for mounting standard 34 mm rifle scope tubes.
Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.

1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
34 mm diameter rings for mounting standard 34 mm rifle scope tubes.
Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.

0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.