Reviews Table Saw Cutting Guide

StealthMounts Trax90 XL Track Saw Square for Festool | 90° Right Angle Plunge Saw Guide Rail Angle Stop

  • Right Angle Track Saw Square Guide compatible with Festool Track Saw Guide Rails.
  • StealthMounts Trax90 provides an instant 90 degree Track Saw Angle without need for measuring and clamping your Track Saw Guide Rail..
  • Simply place the Track Saw Guide on the material and push the Trax90 Track Saw Square to align with the edge, instantly setting your track at 90 degrees and ready for cutting..
  • The Trax90 Right Angle Guide slides into your Festool Track and holds firmly using our sprung slide design, no need to make any adjustments or deal with tightening clamps..
  • The vacuum hose guide stops your hose (or power cable) catching on the edge of the track or getting in the way - smoother cutting with no more snagging..
Check Stock

Festool Plunge Cut Track Saw TS 55 FEQ-F Plus FS w/55" Guide Rail

  • The Festool TS 55 is not your standard circular saw. The saw rides on a guide rail, or track, providing accuracy and versatility allowing it to replace the world's most advanced cabinet saws, miter saws and panel saws. The TS 55 track saw delivers precise, splinter free, glue ready cuts and only takes seconds to setup. Breaking down sheet goods? Cuts at an obscure angle? No longer is there a need to design a complex jig or move heavy material to your large shop equipment..
  • The TS 55 track saw works seamlessly with it's integrated rail, available in various sizes. Utilize the rail and saw with or without a table or work surface. The track saws flat housing allows for flush cutting..
  • Concentrated torque and up to twice as fast work progress with an increased saw blade service life..
  • Virtually splinter-free on both sides thanks to attachable splinter guard..
  • The cutting edge from 90° to 47° remains unchanged even when the saw bevels..
Check Stock

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor.
  • 58” x 2.1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp.
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling.
  • Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory.
  • When clamped, this solid guide shows no play and it tightly holds its grip.
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm.
Check Stock

DNYSYSJ Mini Table Saw,High Precision Woodworking Portable Bench Saw Machine Desktop Cutting Tool for Handmade Wooden Model Crafts,Metal

  • 【Mini Portable Table Saw】Alloy saw blade with high precision and 40mm maximum cutting thickness, ensure the cutting surface flat. Equipped with the sliding ruler and backer in the cutting desk, make it easier for precisely cutting, ensure safety as well. Equipped with four rubber damping pad, anti-slip and shock-absorbing when working.
  • 【High Speed】Mini small table saw Motor maximum rotating speed up to 7200RPM providing ultra strong cutting power but low noise, you can use it just at home..
  • 【Portable and Lightweight】Compact size and easy to carry, perfect for DIY model makers to make any creative artwork anywhere.Note: Laminate flooring and high-density boards cannot be cut with this saw. This product is suitable for cutting models, solid wood..
  • 【Transparent Design】Mini small table saw Transparent protection, acrylic plate. You can see the whole production process, enjoy the fun of DIY.The table saw is designed with aluminum alloy panel, durable material ensures the flatness and precise cutting.
  • 【Wide Applications】Package Included:1 x Bench Top Saw+1 x Blade.Our table saw has a adjustable angle 0-90°,easy to use to m eet your multiple needs.Perfect for handmade wooden model Crafts, Metal, Ceramic Tile, Glass Cutting.
Check Stock

Bosch Professional adapters for the FSN OFA guide rail (for use during guided routing with Bosch FSN guide rails)

  • ...ush stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications..
  • Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location..
  • The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process.
  • Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again..
  • The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset h....
Check Stock

DIY Crosscut Table Saw Sled Kit with Specific Guide Booklet to build your own crosscut sled for More Accurate and Safer in Saw Working, pack of 1

  • （Attention: The UHMW bars are not in 3/4″ by 3/8″ size）DIY your own crosscut sled – You may build your own unique sled to fit your table saw.
  • Make your desired crosscut sled size and meet your unique cutting requirements..
  • Accurate & Safe – Great improve cutting accuracy and make saw operations safer, and steady the work piece while shielding your finger from harm..
  • Quality Kit – UHMW bar is the most often used material in crosscut sled runners and it does not flex under sudden temperature changes and slides more smoothly as there is less friction.
  • The aluminum T track is solid extruded and can be trimmed to match your sled. (ATTENTION: The bars Do Not fit RYOBI table saw track slots).
  • Fun of DIY – Not only can you create your own unique table saw sled but also you can enjoy the processing of DIY, more motivated and confident in the following saw working..
  • Package Included – 2 UHMW bars, 2 T tracks, 1 star knob and bolt, wood secrets of varying lengths, and 1 specific guide booklet (glue and other building materials are not included).
  • Backs its products within 90 days warranty.
  • Please feel free to contact us with any questions you may have..
Check Stock

COVE CUTTING TABLE SAW JIG

  • Cove Cutting Table Saw Woodworking Jigs: Cut custom coves on your table saw without juggling all those fences and clamps! Accepts stock up to 7" wide and 1-1/2" thick, enabling you to cut huge crown moldings that would cost a fortune from the lumberyard..
  • Safe Coving: Our cove cutting jig for table saws provides everything you need for safe and easy coving. Try angling the blade for a truly unique shape..
  • Versatile: This crown molding jig is perfect for making angled cuts, as well as other decorative woodworking projects..
  • Secures The Fences: An ingenious portable clamping system secures the fences using the 3/4" miter slots on the saw table. This cove cutting jig makes cutting cove molding on a table saw easy!.
  • Large, Easy Grip Knobs: Large, easy-grip knobs make for quick, tool-free setups. This table saw accessory includes a featherboard kit that holds stock firmly to the table for added safety, precision, and repeatability..
Check Stock

Mini Table Saw Bench, Multifunctional Desktop Saws 110V Sawing Cutting Machine DIY Cutting Tool for Household Cutting Metal Wood Glass Stone

  • 【No Deformation】Multifunctional mini table saw is designed with 3 mm frame and aluminum alloy panel, and durable materials ensure flatness and precise cutting..
  • 【Speed ​​Adjustable】The motor speed of the table saw is 4000rmp, the maximum saw blade is 100mm, and the power is strong. The portable table saw comes with a power adapter that allows you to easily adjust the speed to suit different cutting speeds..
  • 【Multi-Angle Cutting Table Saw】This mini table saw for crafts 0-90° free cutting, sliding design, accurate and efficient work, easier and precise cutting, to ensure safety..
  • 【Wide Application】Multifunctional tablesaw features with small size, easy to carry, very suitable for DIY model makers to make any creative artwork anywhere, multifunctional mini table saw, compact and powerful, easy to use.The Electric Bench Saw Cutter can be used to cut decorative templates, aluminum profiles, strong bamboo and other materials (note: hard metals such as iron and steel cannot be cut)..
  • 【Service Guarantee】Fast shipping from US.
  • Satisfied problem solutions response within 24 hours.
  • Assured promise for return,replacement,refund based on quality & shipping problems..
Check Stock

Minova Cordless Circular Saw, 20V 4-1/2''Handiness Mini Saw with 4.0 Ah Lithium Battery, Laser&Parallel Guide, 3 Multifunction Cutting Blades, adapt to wood, plastic, aluminum and other soft materials

  • 【Convenient & Handiness】This cordless circular saw weighs only 4.6 lbs along with battery, bringing less fatigue, suitable for continuous work. Small and compact size for excellent maneuverability and portability..
  • 【Adjustable cutting angle】: The maximum depth of cut at 90°is 1-11/16”and bevel capacity at 45 °is 1-1/8”.
  • Perfect for miter cuts, bevels, framing and edging.
  • Angle guide and quick adjustment gives you a huge degree of versatility in your cuts..
  • 【Powerful & Multifunctional】Powerful motor deliver up to 3,500 RPM for efficient cutting performance. You can use it for cutting wood, soft metals, PVC pipes, plastics with ease. The saw comes with 3 blades (4-1/2"): 24T TCT blade for wood cutting, plastic and other soft materials / 60T HSS blade for Aluminum and soft-metal cutting/ Diamond saw blade for tile or other simailar material. With the provided hex key, you can quickly install and remove the blade..
  • 【Laser & Parallel Guide】Laser guide ensures cutting line on the work piece, gives you a better alignment during cutting. Parallel guide provides scale and allows more precise cutting..
  • 【Safety & Ergonomic】 Double safety switch and blade guard prevent accidents and ensure safer cutting operations. The cordless saw only sta....
Check Stock