Reviews T track Clamp

DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
Bolts and washers are 5/16”-18 x 1-1/2-inch.
Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
BUILT TO LAST: T knobs package includes ....

Check Stock

DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
Bolts and washers are 1/4”-20 x 1-1/2-inch.
Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
BUILT TO LAST: T knobs package includ....

Check Stock

POWERTEC 71168 T-Track Hold Down Clamps 5-1/2” L x 1-1/8” Width – 2 Pack

INCLUDES: (2) Hold Down Clamps for T-tracks/T-slots.
(2) 5/16-Inch-18 thread 3-1/2-Inch long T bolts.
FUNCTION: Provides exceptional clamping action for your universal t-track system configurations and assemblies.
FEATURES: Ergonomically designed 5 star knobs, non-marring clamping pads, and a high tension clamping capacity.
DESIGN: Made from premium grade anodized aluminum with a lever shaped profile ensuring optimal leverage in addition to work piece accessibility.
VERSATILITY: Hold Down Clamp Set is ideal for work holding, positioning, and fixturing for many woodworking or metalworking applications, including....

Check Stock

T Slot Bolts for Thule Yakima Roof Rack Cross Bars Platform Cargo Basket Stainless M6 / M8 x 30mm/35mm/65mm Square T Track Bolt Adapter to Secure Bike/Ski/Kayak Rack Solar Panel Awning

Versatile t Track Bolts - this t-track adapter accessory kit is a great solution to attach items firmly to your t track crossbar, compatible with Thule, Yakima, Whispbar cross bar with t slot, perfect t-track adapter accessory kit to attach bike rack / ski rack / kayak rack, roof rack awning, solar panel, fishing rod holder, cargo box to roof rack cross bars, roof rack cargo basket, car rooftop platform or side rails, works well with most solar panel mounting brackets.
Technical Specification - the t bolt is made of 304 solid stainless steel, 79 in x 0.79 in x 0.16 in (20mm x 20mm x 4mm) square head base, m6 / m8 threading, 30m / 35mm / 65mm length.
Easy to Set Up - no drilling, cleaner look, just need to slide it into the t slot of your roof bar, and won't scratch your cross bar, great alternative to roof rack t track clamp*NOTE-please check the dimension of your cross bar rail, this t bolts base is 20mm x 20mm x 4mm (L x W x Thickness)*.
Marine Resistant - stamping t slot accessories, more durable compared with welding parts, made of solid 304 stainless steel, it features rust resistant and corrosion resistant even in salt water, designed for most harsh environment, perfect t track accessories for suv / rv roof top.

Check Stock

Milescraft 4006 3in Bench Clamp – Heavy Duty Hold Down Clamp with Non-Marring Rubber Pad for Use with T-Tracks Clamp Tables & Clamp Plates on Different Woodworking Projects

For clamping on a variety of material thicknesses up to 3.75in (83mm) thick.
Compatible with Clamp Tables, T-tracks, Clamp Plates, Clamp Anchors and Bench Lock.
Large clamp pad with non-marring rubber protection pad.

Check Stock

POWERTEC 71168-P2 T-Track Hold Down Clamps, 5-1/2” L x 1-1/8” Width, Set of 4

INCLUDES: (4) Hold Down Clamps for T-tracks/T-slots.
(4) 5/16-Inch-18 thread 3-1/2-Inch long T bolts.
FUNCTION: Provides exceptional clamping action for your universal t-track system configurations and assemblies.
FEATURES: Ergonomically designed 5 star knobs, non-marring clamping pads, and a high tension clamping capacity.
DESIGN: Made from premium grade anodized aluminum with a lever shaped profile ensuring optimal leverage in addition to work piece accessibility.
VERSATILITY: Hold Down Clamp Set is ideal for work holding, positioning, and fixturing for many woodworking or metalworking applications, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills and more.

Check Stock

Genmitsu 4PCS T-Track Mini Hold Down Clamp Kit, Compatible with 3018-PRO/3018-MX3/3018-PROVer CNC Router Machine

MATERIAL: The hold down clamp kit is constructed of Zinc-Aluminum Alloy for durability and wear resistance.
DIMENSIONS: This clamp is 50mm length x 20mm width x 56mm height..
DESIGN: The size of the slot block of the clamp is designed for Genmitsu 3018 series CNC router. It can also fit ALL other 3018 series desktop CNC router perfectly..
FEATURE: The clamp accommodates material up to 30mm and holds it firmly in position. It can hold most of the material for desktop CNC router machines..
VERSATILITY: This clamp provides exceptional clamping action for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more..

Check Stock

CMT PGC-50 Professional Straight Edge Clamp (50-Inch)

Used as a fence for your bandsaw, drill press orauxiliary fence on your router table or table saw..
A 2-in-1 tool, allowing you to use them as an edge guide, or to clamp your boards or any object..
Sturdy jaws hold your workpiece to the full length of the clamp without any side-to-side play..
Adjustable scale and two T-tracks allow you to use many accessories..
Made of extruded aluminum for easy carriage and enhanced durability..

Check Stock

CMT PGC-36 Professional Straight Edge Clamp (36-Inch)

Used as a fence for your bandsaw, drill press orauxiliary fence on your router table or table saw..
A 2-in-1 tool, allowing you to use them as an edge guide, or to clamp your boards or any object..
Sturdy jaws hold your workpiece to the full length of the clamp without any side-to-side play..
Adjustable scale and two T-tracks allow you to use many accessories..
Made of extruded aluminum for easy carriage and enhanced durability..

Check Stock