Reviews T bolt Clamp

DICMIC Truck Tonneau Cover Replacement and Accessories Part Kit for Hard Truck Bed Cover Include Nut, T-Bolt and Tonneau Cover Clamp

[FITMENT] Only fit hard quad-fold or hard tri-fold truck bed cover..
[PACKAGE INCLUDE] 2x nut, 2x front clamp, 4x sliders for T-bolt, 2x T-bolt, 2x rear clamp..
[MATERIAL] Made of premium plastic and aluminum for durability and stability..
[EASY TO INSTALL] Easy installation, back up for the replacement..
[NOTICE] For any reason, if you are not satisfied with your purchase, contact us directly..

Tired of your intercooler piping blowing off? Upgrade to these Heavy Duty Stainless Steel T-bolt Clamps and leave those old worm clamps in the dust..
Our T Bolt clamps are made from heavy duty 304 stainless steel with rounded band edges to protect soft hose materials from cuts..
These high quality T-Bolt Band Clamps provide high tensile strength, durability, and are corrosion resistance..
T-Bolt clamp measurement: Largest 87mm / Smallest 79mm..

TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
Bolts and washers are 5/16”-18 x 1-1/2-inch.
Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
BUILT TO LAST: T knobs package includes ....

TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
Bolts and washers are 1/4”-20 x 1-1/2-inch.
Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
BUILT TO LAST: T knobs package includ....

Include: 5pcs T-bolts, 5pcs knobs, 5pcs washers.
Works with 3/4 x 3/8 inch T-slot track,helping to secure various jigs and fixtures while optimizing your t-track system.
Knobs are constructed from polypropylene plastic with molded-in brass insert that will not strip.
Excellent workmanship,4 Star knob handling smooth and comfortable.
This T-bolt knob kit can easily be utilized to enhance an assortment of applications, include t-track fences, featherboards, thin rip jig, miter gauge, stop blocks, hold down clamp and so on.

Heavy-duty steel pipe clamp designed to join two pipes together for welding.
Quick-release button lets clamp quickly adjust to clamp to or release pipes.
T-handle provides easy rotation of the ACME threaded screw for quick adjustment.
Carrying handle provides additional control when adjusting the clamp diameter.
Three wing bolts provide contact points to fine-tune the fit of pipe segments.

4-Ply Reinforced High Temp Silicone Coupler and The hose material is high quality silicone, many color and size to choose.
Min temperature: -60 C/-140 F. Max temperature: 230 C/428 F. work pressure: 0.3 to 0.9 MPA. Bursting Pressure: 2MPA. Size tolerance: +/- 0.5MM..
4-Ply Hose for the most demanding applications and is able to withstand high boost pressure. Perfect for use with Turbocharger, Supercharger, Intake, and Intercooler system applications..
High quality T bolt clamp with Nylon insert locknut performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment.
Inner Diameter: (76mm) 3". Length: 4.0''(102mm). Thickness: 5mm- LTI Provided 12 months warranty from the date of purchased and Free return within 30 days NO QUESTION ASK..

4-Ply Reinforced High Temp Silicone Coupler and The hose material is high quality silicone, many color and size to choose.
Min temperature: -60 C/-140 F. Max temperature: 230 C/428 F. work pressure: 0.3 to 0.9 MPA. Bursting Pressure: 2MPA. Size tolerance: +/- 0.5MM..
4-Ply Hose for the most demanding applications and is able to withstand high boost pressure. Perfect for use with Turbocharger, Supercharger, Intake, and Intercooler system applications..
High quality T bolt clamp with Nylon insert locknut performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment.
Inner Diameter: (76mm) 3". Length: 4.0''(102mm). Thickness: 5mm- LTI Provided 12 months warranty from the date of purchased and Free return within 30 days NO QUESTION ASK..

INCLUDES: (2) Screw Vice Hold Down Clamps for T-Tracks.
FUNCTION: Designed to fit any standard t-track that accepts 1/4” hex head bolts – these screw type clamps will slide into your t-track and quickly secure your workpiece with a twist of the knob.
VERSATILITY: Works seamlessly with an assortment of applications, including router table, drill press, saws and jig assemblies.
CLAMP CAPACITY: Able to securely hold 1/4” to 2” thick woodworking stock. Compatible with Kreg, Incra, Peachtree Mini and other ¼” T Track..
PREMIUM BUILD: Each hold down clamp features an ergonomic design with a plated steel clamp screw and foot with a soft plastic non marring cap, paired with an anodized aluminum body and round 1-1/2” clamping screw knob.