Reviews Swage Block Punch

Real Avid Accu-Punch Hammer & Long Punches Set with Oversized Master Bench Block

  • ESSENTIAL WORKBENCH TOOLS designed with Real Avid’s ingenuity: Accu-Punch Hammer and LONG PUNCHES Set paired up with advanced, specialized Master Bench Block.
  • AUXILIARY TOOLS: Proprietary Pin Alignment Tool and non-marring finishing punch to make common maintenance, modification and repair tasks hassle-free.
  • ACCU-PUNCH HAMMER: adjust to the situation with interchangeable hammer heads: easily switch between steel, brass, rubber, and nylon.
  • grip confidently thanks to ergonomic, rubberized handle – all to allow for maximum control and precision while tapping pins.
  • SET OF SPECIALIZED, LONG PUNCHES: Special Application, Long Punches – selection of nickel-plated steel, standard flat punches and roll pin punches, featuring extended bolt catch pin and magnetized roll pin starter. Designed to fit flush against flat surface, such as receiver..
  • MASTER BENCH BLOCK: large, non-slip, steady work surface, helps protect finish and firearm itself from causing accidental damage. MAGNETIC: captures the small pins – prevents losing pins. Includes magnetic storage solution for common size pins.
  • ADVANCED AND SPECIALIZED: purposefully contoured for standard parts and components. Allows you to work efficiently and confidently. Maximum comfort and maxmum stability f....
Check Stock

9 Pieces Roll Pin Punch Set and 4 Pieces Hollow End Starter Punch Tool with Carry Case for repairing or servicing equipment, machines, and vehicles

  • ★9 pieces roll pin punch set is made of highly quality hardened 40# steel, drop forged, heat treated & knurled steel for extreme durability, workability, 4 pieces starter punch tool is made of highly quality stainless steel.
  • ★9pcs roll pin punch set including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”size, perfect tool for gunsmith, jewelers, watchmakers building, engineers, carpenters - use on guns, machinery, vehicles, woodwork and crafts, excellent tool for adding into your armorers wrench package.
  • ★4 pcs hollow end starter punch set including 1/8”, 5/32”, 3/16”, 7/32”,will cover all of the AR platform including trigger guard, gas block, and forward assist.
  • ★Hollow end roll pin punch set helps to prevent damage caused by an accidental slip off while getting the pin started.
  • ★This 9pcs roll pin punch set and 4pcs hollow end starter punch set come with red carrying bag, easy to use, carry, storage or hang this tool set.New set could be replaced if you have any problems.
Check Stock

Brother P-Touch-E550W Hand-Held Labeler (UX0987),Black/orange

  • FIT FOR INDUSTRIAL LABELING. Label large industrial projects with 6 label sizes from 3.5mm to 24mm.
  • EFFICIENT. Increase efficiency with 5 quick application keys for cable wrap, cable flag, patch panel, punch block and faceplate labels.
  • CONNECTIVITY OPTIONS. Increase efficiency with 5 quick application keys for cable wrap, cable flag, patch panel, punch block and faceplate labels.
  • FREE SOFTWARE. Design your own custom labels including barcodes and QR codes with the included P-touch Editor software and PC connectivity.
  • PRODUCTIVE. Increase productivity with advanced alpha and numeric serialization and an automatic half-cutter.
  • EVERYTHING YOU NEED. Hard carry case, rechargeable Li-ion battery, AC adapter, and USB cable included.
Check Stock

Hilmor 1964041 Deluxe Compact Swage Tool Kit - HVAC Tools and Equipment, Black

  • SWAGING TOOL: Combination of power and control makes this ideal for HVAC/R instillation, maintenance, and repairs. Can swage 2-1/8″ tubing to 1/4″ without a crack. Includes a deburring tool, designed to remove sharp edges and burrs..
  • SINGLE HAND OPERATION: One handed setup made possible by an innovative hydraulic mechanism and release button. Convenient and comfortable design. Propietary design, combined with a weidght of only 8.5 lbs, reduces user fatigue..
  • EXTREMELY VERSATILE: The pistol shape design means it can fit in the small, hard to reach areas..
  • INCLUDES: Swage body, deburrer, kit box, and 10 expander heads (1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1-1/8″, 1-3/8″ and 1-5/8″).
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Ambienceo 45 Degree Traditional Extrusion Type Flaring & Swaging Tool Kit OD Soft Copper Tube Cutter W/Carrying Case

  • Flares 9 Tube sizes: For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing.
  • 5 swage adapters that swage 7 tube sizes: 3/16",1/4",3/8",5/16",1/2",5/8"& 3/4" O.D.Tubing.
  • Copper tubing flaring tool and copper tubing swaging kit in a combination tubing flaring swaging kit to meet all your needs.
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation.
  • Self centering, slip-on forged steel yoke.
Check Stock

Eastwood 3/16 Die Kit Replacement Brake Line Tubing Flaring Tool 45-Degree Single Double and Bubble Brake Flares

  • Flare Punch Set For Eastwood Pro Brake Tubing Flaring Tool.
  • Direct Replacement For Your Worn 3/16” Die Set.
  • Restores Like New Performance To The Eastwood Pro Brake Tubing Flaring Tool.
  • This Kit Includes The Op1 Punch Die, The Op2 Punch Die And The 3/16 Inch Die Plates To Make A Complate Kit To Refresh The 45 Degree Turret Head.
Check Stock

97 Pcs Jewelry Metal Stamping Kit Metal Stamps Set Include Art Font Letter Punch Set Number Punch Set Hammer and Steel Bench Block for Imprinting Marking on Metal Wood Leather, 3 mm

  • Package Include: this metal stamps set includes 1 piece art font capital letter punch set (include 27 pieces), 1 piece art font lowercase letter punch (include 27 pieces), 1 piece number punch set (include 9 pieces), 1 piece hammer, 1 piece steel bench block, 1 piece stamping jig,30 pieces aluminum practice blanks, and 1 piece black oily double ended marker.
  • Our kits are complete to meet your daily jewelry stamping needs.
  • Reliable and Quality: these 3 mm steel punches are made of quality chrome vanadium steel, and the stamps are designed to withstand up to 10,000 punches.
  • You can as you like to form consecutive phrases and digital stamps.
  • No Rebound Steel Bench Block: steel stamping blocks feature non slip rubber feet that absorb shock, stay in place, and create a solid surface to work on, resulting in stable, clean, and accurate hits.
  • This will make the pattern or lettering we work more delicate.
  • 30 Stamping Blanks: the stamping kit includes 30 aluminum practice blanks.
  • Aluminium is a soft metal suitable for making fine handmade jewelry or fine family keepsakes.
Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock