Reviews Surface Plate Clamp

SmallRig V Mount Battery Plate V-Lock Mount Battery Plate with Dual 15mm Rod Clamp for Camera Power Supply - 3016

  • 【V-Lock Battery Plate】SmallRig V Mount Battery Plate with Dual 15mm Rod Clamp 3016 utilizing a standard V mount fits most V mount batteries to....
  • 【Comes with Dual Rod Clamp】It comes with a dual 15mm rod clamp, which allows you to mount the battery plate onto standard 15mm LWS rods..
  • 【Multiple Mounting Points】The plate itself features multiple 1/4"-20 countersinks, M3 countersinks, M4 countersinks, 1/4"-20 thread holes, M4....
  • 【Wide Compatibility】The mount features a V-lock mount with a quick-release lever that fits most V-mount batteries, but it is not compatible with....
  • 【High Customization】Two stoppers will prevent the battery from twisting when attached. The plate is also compatible with the Blackmagic URSA mini.....
Check Stock

SMALLRIG DSLR and Mirrorless Quick Release Clamp and Plate for Arca Standard - 2280

  • Quick Release Clamp and Plate for Arca Standard.
  • The QR clamp and plate is designed for mirrorless and DSLR camera.
  • Attach the QR plate to the camera or camera cage, and then drop it into the receiver.
  • Multiple 1/4’’ and 3/8’’ threaded holes on the bottom for attaching different tripod plate.
Check Stock

NICEYRIG 15mm Rail Riser Rig System Quick Release Base Kit with QR Plate 15mm Rod Riser Clamp Short Rods Applicable DSLR Camera

  • The quick release plate is compatible with Manfrotto 577, 501, 504, 701, the quick release plate could replace your Manfrotto quick release plate and be mounted on tripod directly. Also could be mounted with camera or camera cage on the top. It is anti-skid designed..
  • There is off-rail prevention on the quick release base, preventing QR plate from removal accidental. The wingnut with the ability to change the position of the knob to tighten or unscrew to make the QR plate quick release..
  • The 15mm rod riser clamp (with 15mm rods in vertical and horizontal) is adjustable quickly in height or both front and back. The wingnut of 15mm rod clamp allows the adjustment of the rods easily..
  • Two short rods (2.5inch length) with 15mm riser rod clamp are attached on this easy cheese plate to used for DSLR camera baseplate lifting system. The Easy plate is equipped with various threaded holes(1/4" 3/8" screw threaded) in 9mm spacing..
  • Made of aluminum alloy, lightweight and durable. Package Includes: 1x 15mm rail riser kit, 1x hex spanner, 1x 1/4 tripod screw, 1x 3/8 tripod screw....
Check Stock

iShoot Metal Lens Collar Tripod Mount Ring Compatible with Canon RF 100-400mm f/5.6-8 is USM, Lens Support Holder Bracket Bottom is Arca-Swiss Fit Quick Release Plate Dovetail Groove

  • ... RF 100-400mm f/5.6-8 IS USM Lens, cannot be used with other lens.
  • the inner wall of the tripod ring has a concave-convex irregular structure, and the switch hole is reserved, which does not affect the use of the switch on the lens.
  • the tripod ring cannot be rotated, only support horizontal shooting.
  • 2. The contact surface between the inner wall of the tripod ring and the lens is plastic composite film, will not wear lens surface when installed correctly.
  • there should be no stickers on the lens surface installation position, if there is, remove it, otherwise it will affect the normal installation.
  • hollow-out weight reduction design, net weight is about 160g.
  • 3. The tripod collar bottom is added 50mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly.
  • more practical than lens collars without QR-Plate..
  • 4. The Lens support bottom reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly..
  • 5. The lens collar IS-RF140 can be combined with clamp mount converter IS-3950PRO (Sold Separately), which can be used for fluid heads with Manfrotto structure..
Check Stock

DEOYUEND Cabinet Clamps, Cabinet Claw Cabinetry Clamps Cabinet Installation Clamps Cabinet Tools with Two Side Screws and Alignment Plate, 2 Pack, Orange

  • 【Anti-slip Mat】Cabinet Face Frame Clamps Tools is equipped with 3 rubber protection pads for the clamping surface and the alignment plate to avoid damage to the cabinet during installation.Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position..
  • 【Movable Drill Guide Hole】The drill guide hole can be moved up and down. Both sides of the drill guide hole are laser-marked metric and inch scales, to pre-drill and drill the pilot hole more accurately and effectively..
  • 【Easy to Install】 Cabinet claw can easily tighten and align the two door frames of the cabinet. With movable drill guide holes, it is easy to drill holes and screw screws at specific positions. Even if you are not a professional installer, you can complete the installation in minutes..
Check Stock

Stroller Snack Tray, 3 in 1 Stroller Cup Holder Clip On Removable Universal Stroller Snack Catcher and Drinks Holder Non Slip (Black)

  • 【FOR MOST STROLLER HANDLEBAR】Clamp opening is about 5cm/1.97inch adjustable, suitable for a variety of baby stroller handle tubes, flat tubes and round tubes. The clamp has dents for a tight, non-slip grip..
  • 【3 COMPARTMENTS】Stroller dinner plate features 3 compartments, including baby bottle area, snack tray, water bottle area, more convenient and practical, let the baby learn to eat by himself..
  • 【NON SLIP】The baby bottle holder has a built-in elastic fixing strip, which can fix the cup body, prevent it from falling, and avoid hitting the baby or scalding the baby with hot drinks, reliable to use..
  • 【STURDY MATERIAL】Baby stroller snack tray is made of ABS thickened material, featuring high toughness, wear-resistant, scratch-resistant, durable and durable. And it has a smooth surface and no odor..
  • 【ROTATING FIXING CLAMP】The clamp can be rotated 360 degrees and can be freely adjusted to a suitable position for installation. It supports any installation of positive and negative, not limited by space..
Check Stock

Ryka womens Sky Walking Shoe Frost Grey/Aqua Sky/Iron Grey 8 US

  • Compatibility: Compatible with two cables at the same time (Maximum Capacity: 2 cables with diameter of 6mm).
  • Install Method: The cable clamp is fixed to the cage, handle, L plate, and other accessories by 1/4" screws, and accommodate cable such as HDMI cable,....
  • Quick Installation: Designed with space on the surface, the wrench can pass through the clamp to install or remove 1/4" screws, and then quickly....
  • Easy To Use: the spring cover is tight, and the cable can be installed by opening the cover, which is convenient and quick.
  • Product Advantages: keep the wire tidy, prevent accidental disconnection of the signal, and protect the wire port.
Check Stock

Rockville ROGAN STAND Pro Boom Arm Mic Stand with Fixed Mount+Desk Stand+Cable

  • Includes: Boom arm stand. Allen key . 2" long M8 screw (for desk surface-mounting). 4" long M8 screw (for desk surface-mounting thicker desks). C-Clamp for desk clamping. Fixed mounting plate to mount it into your desk (comes pre-installed to the C-clamp, see our video for how to install). Built-in 6.5 foot XLR cable that is hidden and run inside the boom arm stand. Mic clip.
  • Rockville ROGAN STAND Pro Boom Arm Mic Stand. Includes XLR cable built into the stand that is hidden inside the stand for a clean look. Deluxe pro version is one solid piece with no visible springs and an advanced articulation mechanism..
  • Easily Mounts to the top of a desk (See our install video). Easily clamps to the side of a desk with the included C-Clamp (supports desks up to 2.3” inches thick) . This is made out of aluminum which is rust-free and lighter weight..
  • Arm length: 19" + 19". Position is completely adjustable. Firmly stays in place once you adjust it. There is a safety locking pin for the arm to lock in place (other similar stands do not have this)..
  • Foldable design, just pull the knob in the middle of the stand and it folds in half (Other similar stands do not have this). Standard 5/8” Mic Threads for Connecting Most Podcast and Vocal Microphones. Suitable for st....
Check Stock

Bora 543056K Circular Saw Plate and Straight Edge Guide System . The 50” Clamp Edge and Saw Sled That Allows For Straight, True Cuts

  • EVERYTHING YOU NEED FOR STRAIGHT CUTS – The 50” clamp edge adjusts to firmly clamp to both ends of your board/material, and the saw plate / saw sled easily attaches to your circular saw..
  • WORK TOGETHER FOR PRECISION – The saw guide (with your saw attached) slides right into the fastened clamp edge, and slides along it, ensuring your cuts are straight and true..
  • WORKS WITH ALMOST ANY MAKE/MODEL SAW – Works with most makes and model circular saw, both in right handed and left handed configuration..
  • EASY TO USE – The clamp edge easily attaches and de-attaches, and is made of high quality aluminum. The saw plate easily fastens tightly to your saw (for added versatility, your saw can still be used freehand with the saw plate on as well.).
Check Stock