Reviews Superior Fender Flares

TuTuYa Fender Flares, 4.9Ft/1.5m Universal Car Wheel Fender Extension Moulding Flares Auto Tyre Eyebrow Trim Strip Stick Out Edge,Pack of 4 Pcs

  • IMPORTANT:because the car wheel fender is made of high-strength soft rubber so that it is easy to deform.in order to ensure it be more stable after the install, if possible,you could heat it before install,and adjust to best fit the shape of your car tires eyebrow then stick wheel fender on the car.How To Install &Tips please kindly check it all !!!.
  • TIPS TO PREVENT FENDER FLARES FALL OFF: 1.Please install the car wheel fender in good weather day or warm indoor.it would be better if use a heat gun or hair dryer to heating the item.
  • they go on easy if you heat up each section of the rubber.(HIGHLY RECOMMEND). 2.Follow installation instruction(HOW TO INSTALL). 3.Leave the car alone for 24 hours after install the wheel fender flare..
  • HOW TO INSTALL: 1.Clean the pre-installed position,make sure the position is clean and dry before you install. 2. Measure the length of tail in need.3.Cut off excess length,heat it if possible. 4. Use the adhesion promoter(wipe paper) to wipe the pre-installed position,then waiting about 10 seconds. 5. Tear the cover of the glue of one end of car wheel rubber strip then stick on car. 6. Tear more cover of glue slowly and stick it on car slowly with strength..
  • FUNCTION:Exterior wheel tyre fender protective and decorative accesso....
Check Stock

Nilight Off-Road Fender Flares Kit Compatible with 2007-2018 Wrangler JK (2/4 Doors) Heavy-Duty Solid Steel Black Textured Fenders for Unlimited JK Front & Rear Flat-4pcs,2 Years Warranty (JK-63D)

  • PERFECT FIT: Compatible with 2007-2018 Jeep Wrangler JK & JKU Unlimited 2 door & 4 door models..
  • TOUGH & DURABLE: Comes with 2 front fender flares & 2 rear fender flares,Each set of Fender Flares is made of heavy-duty stainless steel for superior strength and durability,protect wheel wells from mud, scratches, sand and other outer damage when driving off-roads, effectively reduce splash of the dirt aside the body..
  • FOR OFFROAD: Give your Wrangler an aggressive appearance while enhancing clearances for larger tires and off-road travel. Protects vehicles from on & off-road debris..
  • EASY TO INSTALL: Comes with install instruction ,Drilling is needed for the installation of the rear fenders, but it is quite easy with self-tapping screws are included for installation..
  • BEST SERVICE: Buy At Nilight , You Earn What You Buy! We offer 2 Years Nilight and Lifetime Best Customer Service. If you have any questions or problems, please contact us..
Check Stock

Rexka 25pcs Fender Flare & Rocker Moulding Clip 68039280-AA Compatible with Jeep Wrangler JK & Unlimited JK Ram 4500 Ram 5500

  • Other Names: Fender Flare & Rocker Moulding Clip,Wheel Flares Clips,Applique Clip, Front, Applique Clip, Rear, Clip.
  • Top Head Size: 14mm x 38mm Bottom Head Size: 16mm x 38mm Stem Length: 14mm Fits Into 10mm Hole.
  • Replaces Chrysler: 68039280AA , Fits Jeep Wrangler JK & Wrangler Unlimited JK 2007 - 2018, Ram 4500 2011-2017，Ram 5500 2011-2017.
  • Positions: Body Color Fender Flares, Black Wheel Flares, Accent Color Fender Flares, To Front Fascia..
  • Meet or Exceed OEM Specification. You can find it made by Very High quality Material Frome the Photos.
Check Stock

Tyger Auto TG-FF8C4058 for 1999-2006 Chevy Silverado / GMC Sierra (Incl. 2007 Classic) | Paintable Smooth Matte Black Pocket Bolt-Riveted Style Fender Flare Set, 4 Piece

  • HARDCORE - Rugged appearance bolstered by recessed stainless steel rivets emphasizes their enormous presence. TYGER's upmarket, trim grade Pocket Style Fender Flares never disappoint..
  • HEAVY DUTY - Special Injection Molding process ensures enhanced durability, flexibility and strength for these flares to effectively withstand against cracking, warping and chalking offering a superior off-road driving experience..
  • FINISH - 4 pieces 100% UV-resistant fender flares with fine-textured matte black surface finish. DIY re-paintable exterior to fit your vehicle color..
  • DIMENSIONS - Flare Height: 4" in front and 4.25" in rear. Tire Coverage: 2" in front and rear..
  • EASY INSTALLATION - Average install time 2+ hours with minor drilling required. Mounting Instruction and Hardware included on package. TYGER Limited Lifetime Warranty against cracking, warping or any other factory defects..
Check Stock

Tyger Auto TG-FF6C4218 for 1999-2007 Chevy Silverado/GMC Sierra (2007 Only Compatible with Classic Models) | Textured Matte Black Paintable Factory Style Fender Flare Set, 4 Piece

  • INSPIRED DESIGN - TYGER factory style fender flares provide sleek but distinguished appearance for your vehicle..
  • HEAVY DUTY - Special Injection Molding process ensures enhanced durability, flexibility and strength for these flares to effectively withstand against cracking, warping and chalking offering a superior off-road driving experience..
  • FINISH - 4 pieces 100% UV-resistant fender flares with fine-textured matte black surface finish. DIY re-paintable exterior to fit your vehicle color..
  • DIMENSIONS - Flare Height: 4" in front and rear. Tire Coverage: 0.75" in front and rear..
  • EASY INSTALLATION - Average install time 1+ hour with no drilling required. Mud flaps removal are required prior to installation. Mounting Instruction and Hardware included on package. TYGER Limited Lifetime Warranty for US customers against cracking, warping or any other factory defects..
Check Stock

iJDMTOY Smoked Lens Amber Full LED Front Fender Flare Side Marker Light Kit Compatible With 2017-2020 Ford Raptor, Powered by 12-SMD LED, Replace OEM Sidemarkers

  • 【Suitable Models】The wheel fender flares lights are Compatible with Ford Raptor and F150 series, and it can also be DIY installed on other fender.
  • 【Installation】The side marker lights is waterproof and dustproof, no screws are required for installation. Plug and play, connect with positive and negative power supplies.
  • 【Brightness】Each wheel fender flares light is embedded with 12 high-brightness and energy-saving LED wicks, which not only guarantees sufficient brightness, but also has a small current demand, which is very energy-saving and environmentally friendly.
  • 【Durable】The two raised vertical lines on the surface of the lamp housing help protect the lamp surface from scratches. Conducive to long-term use and still keep beautiful.
  • 【Package Included】2x Amber LED Smoked Lens. -We recommend that the Raptor needs 4 fender flares lights, and the F150 needs 2 fender flares lights. Please purchase according to your actual needs, we will do long-term quantity discounts to facilitate your flexible matching.
Check Stock

Tyger Auto TG-FF6C4368 Compatible with 2014-2018 Chevy Silverado 1500; 2015-2019 Silverado 2500HD 3500HD | Matte Black Fine-Textured Factory Style Fender Flare Set, 6 Piece

  • INSPIRED DESIGN - TYGER factory style fender flares provide sleek but distinguished appearance for your vehicle..
  • HEAVY DUTY - Special Injection Molding process ensures enhanced durability, flexibility and strength for these flares to effectively withstand against cracking, warping and chalking offering a superior off-road driving experience..
  • FINISH - 6 pieces 100% UV-resistant fender flares with fine-textured matte black surface finish. DIY re-paintable exterior to fit your vehicle color..
  • DIMENSIONS - Flare Height: 3.5" in front and 4" in rear. Tire Coverage: 0.75" in front and rear..
  • EASY INSTALLATION - Average install time 1+ hour with minor drilling required. Mud flaps removal are required prior to installation. Mounting Instruction and Hardware included on package. TYGER Limited Lifetime Warranty for US customers against cracking, warping or any other factory defects..
Check Stock

Boigoo Front Fender Flare Light Compatible with Ford F150 Raptor F150 F250 F350, Trucks/Pickup Side Marker Lights - Amber Lights Smoked Lens 12LED Super Bright

  • 【Suitable Models】The wheel fender flares lights are Compatible with Ford Raptor and F150 series, and it can also be DIY installed on other fender.
  • 【Installation】The side marker lights is waterproof and dustproof, no screws are required for installation. Plug and play, connect with positive and negative power supplies.
  • 【Brightness】Each wheel fender flares light is embedded with 12 high-brightness and energy-saving LED wicks, which not only guarantees sufficient brightness, but also has a small current demand, which is very energy-saving and environmentally friendly.
  • 【Durable】The two raised vertical lines on the surface of the lamp housing help protect the lamp surface from scratches. Conducive to long-term use and still keep beautiful.
  • 【Package Included】2x Amber LED Smoked Lens. -We recommend that the Raptor needs 4 fender flares lights, and the F150 needs 2 fender flares lights. Please purchase according to your actual needs, we will do long-term quantity discounts to facilitate your flexible matching.
Check Stock

SuperATV Heavy-Duty Fender Flares Mud Guards for 2012+ Kawasaki Teryx 4 (See Fitment) | Extreme Durability | Protect Against Rocks, Dirt, Sand, & Mud

  • ...Fits】 2012+ Kawasaki Teryx 4 | 2014+ Kawasaki Teryx 4 LE | 2021+ Kawasaki Teryx 4 S.
  • 【More Riding, Less Cleaning】 No matter where you ride, you’re bound to end up with an unfortunate amount of dirt and stray rocks kicked up into your cab | That’s why SuperATV designed these ultra-durable Kawasaki Wide Fender Flares for your Kawasaki Teryx4 | They shield your cab and your face from flying debris.
  • 【Much-Needed Protection】 Our Teryx 4 Fender Flares give you much-needed extra protection at the front and rear of your machine | They extend three inches off the side of your PRO XP, giving plenty of coverage where you need it most.
  • 【Classic Design, Industry-Leading Strength】 There are plenty of side-by-side fender flares on the market, but they don’t offer the strength and style that ours do | SuperATV’s Fender Flares are made from thick, high-strength material | This material is highly tested and strong enough to stand up to the most brutal trail abuse.
  • 【Top-Quality Ingredients & Easy Install】 Our Kawasaki Teryx Mud Flaps are designed to match the natural contours of your machine so well that you’ll forget they’re not OEM | And the best part? With included hardware and an easy installation process, most riders have these ....
Check Stock