KPS Stainless Steel Equipment Grill Stand 30 x 18 - Heavy Duty NSF

  • Durable, Stainless Steel Top With a 16-gauge stainless steel top, this stand can support up to 700 lb. of evenly distributed weight. Great for holding a variety of equipment, you can increase your work space by adding this stand to your kitchen. The stainless steel material is easy to maintain and can be wiped clean at the end of the day..
  • Additional Storage Space To provide even more storage options, this stand comes with a galvanized steel undershelf. Perfect for storing additional equipment or supplies, this shelf utilizes the space in your kitchen to its fullest potential. Plus, it has a weight capacity of 540 lb. so you can confidently place equipment and heavier kitchen tools on this shelf..
  • Side and Back Edging The 2" high edging around the sides and back of the top shelf helps contain your equipment for added safety. Because this added protection prevents from your equipment or supplies from falling onto the floor, this edging comes standard on this stand..
  • Sturdy Legs For added stability, this stand rests on 4 galvanized steel legs. An economical solution, these legs elevate the stand off of the ground for easy cleaning and a comfortable working height..
  • Bullet Feet To ensure a stationary work stand, the bullet feet on this unit prevent the stan....
Check Stock

24kmagic Outdoor Camping Survival Bracelets Outdoor Hiking Travelling Hunting Gear Emergency Tactical Parachute Rope Bracelet with Packet Knife (Gold)

  • Feature: Parachute rope material, very sturdy and durable.
  • detachable design, very light and convenient.
  • Sharp blade, outdoor practical equipment..
  • Application: Fit for outdoor sport, especially for camping, expedition etc..
  • Specific: The material of parachute rope and stainless steel is very sturdy, durable beyond your imagination, easy and convenient to carry, indispensability of outdoors equipment..
  • Buy one get one free:Buy one Survival Bracelet,we will give you a Variety Magic Bandana for free.Thank you!.
Check Stock

Body Champ Space Saving Pull Up Bar, Exercise Equipment, Home Gym Power Tower, Power Station for Pull Ups, Push Ups, Vertical Knee and Leg Raises and Dip Stand, PT600, White, One Size

  • Space Saver Gym Equipment For Home: The Pt600 Power Tower Takes Exercise Back To Basics. Single-Side Design Can Be Placed By A Wall Or Corner Of Home Gym Garage Gym. Use It For Vertical Knee And Leg Raises, As A Dip Station, As A Lat/Pull-Up Bar, Or As Push-Up Bars. Tone Your Entire Body With Our Workout Equipment For A Total Gym Experience.
  • Versatile Home Gym Equipment: With So Many Different Workout Possibilities, You'Ll Be Able To Easily Do Strength Training, Targeting Specific Muscle Groups Without The Need For Weights. Tone Your Shoulders, Biceps, Chest, Legs, And Even Abdominal Muscles.
  • No Weights Required: Once You Have This At-Home Fitness Equipment Set Up, You'Ll Be Able To Work Out And Circuit Train Easily Without Anything Extra. Now You Can Easily Build Muscle And Increase Definition Without Purchasing Expensive Weights.
  • Sturdy Design: We Designed This Standing Power Tower With Traction-Ready Grips, A Height-Adjustable Frame, Padded Cushions To Protect Your Arms And Back During Workouts, And A Steady, Sturdy Base That Sets Up Virtually Anywhere, From Tiled Dens To The Concrete Floor Of The Garage. It Measures 42 X 43 X 85.75 Inches.
Check Stock

StarTech.com 2U Universal Rack Mount Rails - for 19in Server Rack Enclosure or Cabinet - Adjustable A/V Rack Rails UNIRAILS2U ,Black

  • VERSATILE FUNCTIONALITY: These 2U universal rack rails let you mount non-rackmount equipment into your 19 server rack. It is also great for mounting....
  • TAA COMPLIANT: This TAA compliant 19in rack mount rails adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government....
  • MEETS INDUSTRY STANDARDS: These server mounting rails adhere to the EIA-310 standard for 19 rackmount equipment. The depth of the rack mount rails is....
  • STURDY CONSTRUCTION: To ensure your equipment is secure, this network equipment mounting rails feature cold-rolled steel construction. The durable....
Check Stock

MEIYYJ M2 M2.5 M3 Hex Socket Flat Head Screw 304 Stainless Steel Hexagonal Countersunk Screws,Pack of 480

  • Made of 304 stainless steel which features is strength and offers good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas..
  • Fine workmanship, smooth surface without burrs, complete and deep thread, stressed uniformly, hard to slip, sturdy and durable..
  • 15 Kinds Hex Socket Flat Head Screw .It's convinient for you to meet different situations..
  • Widely used in the home and office appliance, communication equipment, electronics equipment, ship assembly and other machinery industry etc. fixing component, industrial and construction fasteners..
  • Total 300pcs screws and 180pcs nuts. All of bolts countersunk are packed in a durable and sturdy Box..
Check Stock

Shelf Pole Hooks 5-Pack | Chrome Multi-Use C-Hook | Best Solution for Garage Shelving Storage Organization | Use with Metal or Wire Shelves and Racks | Heavy Duty, Easy Installation

  • ...ieces heavy duty large S hooks, sturdy and sufficient, can be applied for many years without deformation, adequate quantity is enough to meet your daily life needs and replacement.
  • Wide range of application: S hooks hanger is applicable for both indoors and outdoors usage, fitting for hanging cycles, ladders, sports equipment and so on.
  • At the same time, it is also a nice outdoor fence hanger for swimming pool equipment, plant supports.
  • Please measure the size before purchasing.
  • Good load-bearing capacity: the maximum load bearing capacity of the heavy duty S hooks is about 50 pounds, which is stronger than any other small and light S-shaped hooks.
  • The tail end of the hook is approximately 2.4 inches in coating, easily protecting valuable equipment and reducing wear. Please do not exceed the specified weight.
  • Sturdy and stubborn: S hooks hanger for kitchen is made of quality galvanized steel, reliable and not easy to break, and the load-bearing capacity is strong, ensuring its sturdy quality.
  • You can use it for many years without bending or deforming.
  • Save time and energy: you only need to hang S shape hook wherever you want without any other operations.
  • You can use it without racking your brains to install or drill, mo....
Check Stock

Brewing Hydrometer Alcohol Tester Kit: Beer & Wine American-Made Specific Gravity ABV Test Pro Series Traceable & Borosilicate Glass Test Tube Jar & Brush

  • ...e making! The Elite Brewer Tools you need!.
  • ✔️ KNOW YOUR BREW & CRAFT YOUR BEST EVERY TIME: Take accurate gravity readings by using the best specific gravity hydrometer abv tester. (0.990 - 1.170), Brix/Balling tool (0-35), Potential Alcohol (0%-22%). As home brewers, we love offering the highest quality brewing equipment, tools and wine making supplies to help you succeed in crafting brews. Our brewing scale is an easy to read meter. This narrow GLASS Test Cylinder is the highest quality with thick, sturdy lab grade borosilicate glass..
  • ✔️ WASTE LESS PRECIOUS HOMEBREW! We designed our glass test jar to use less liquid wort, mash, must or wash for hydrometer tests. Use only 125 ml instead of a 250 ml as most others require. Waste less, drink (or share) more! SOLID 1-piece THICK borosilicate (Boro) 3.3 glass test flask with bumper guard. It is STURDY and STABLE. BREWERS Prefer Glass Test Jars: We all know sanitization is key to alcohol making. And distillers need to use glass, not plastic. The Brewing America Test Jar is CLEAR..
  • ✔️ WE CARE: We personally inspect each piece of your beer, wine, meade and cider making supplies and equipment kits before shipping, wrapping it ourselves with our microfiber cloth. Our products are responsibly made f....
Check Stock

Ultimate Support Studio Furniture (NUC-004)

  • Stylish and sturdy desktop constructed from unique, patented powder-coated MDF.
  • Sonic Isolation and Decoupling on Desk Legs.
  • Interior channels inside Legs for Weight Management and Dampening.
  • Includes two 24" extensions, 12-Space under-desk equipment rack, 4-space desktop equipment rack (fits under 2nd tier), adjustable / retractable keyboard tray, 2nd tier.
Check Stock

Mythinglogic Garage Ball Storage, Rolling Sports Ball Storage Cart, Basketball Sports, Ball Locker for School Equipment Organizer with Lid,Black,Steel

  • Ball storage cart :perfect for organizing sports balls and other sporting equipment ,Matte black metal storage basket for sports balls & equipment cart ,Completely collapsible for easy storage ,Foldable Module Design, Assembly within 15 Minutes.
  • Durable Wheels: rotating casters allow for easy maneuvering, rubber wheels, on sturdy casters, allow easy transport of gear on both field and court surfaces ,Dimension: 35.4" x 25.9" x 24".
  • Hold space:grid design accommodates a variety of athletic equipment from balls,There is plenty of room for all sports equipment types in this cart. It holds up to 11 basketballs, or a mix of soccer balls, footballs, volleyballs and playground balls ..
  • Closing cage design: The sports ball storage rack comes equipped with a lockable hinge cover to ensure the safe keeping of your sports equipment. Made of all-steel construction, the ball organizer keeps your sports playing balls locked and safe..
  • Easy to carry: perfect for summer camp and leisure sporting activities,as awell as professional and recreational use, the full-size sports ball rack comes with caster wheels for portability. It’s easy to move on and off the court in addition to being rolled outdoors as a day use sports equipment locker..
Check Stock