INSIZE 6313-2D5 Setting Ring, 2.5\ Diameter

  • Three points internal micrometers and bore gages.
  • Example : When specified a 2" ring, marking may read 20008".
Check Stock

NOGA DG61003 Mag Base & TTC 1 Dial Indicator Set

  • Easy to set up gages into required position..
Check Stock

Pro Series by HHIP 4102-0012 Plug Gage Handle, 0.061\ - 0.25\ Measuring Range

  • Holds pin Gage with greatest gripping power.
  • Can be used with go pin (Green) and No go pin (red).
  • Comfortable and ergonomically designed handle for pin Gages.
Check Stock

Forster Products 30-06 Field Headspace Gage

  • FIELD: Corresponds to the longest safe headspace. If a rifle closes on a FIELD gage, its chamber is dangerously close to, or longer than, SAAMI-specified maximum chamber size. If chamber headspace is excessive, the gun should be taken out of service until it has been inspected and repaired by a competent gunsmith. FIELD gages are slightly shorter than the SAAMI maximum in order to give a small safety margin..
Check Stock

DSBL-29 1/16-1/2 by 64ths High Speed Steel 29 Piece Drill Blank Set

  • Photo shows a sample Drill Blank Set, not necessarily this specific set..
Check Stock

MC-1-M .061-.250\ by .001\ Minus Tolerance Pin Gage Set - 190 Gages

  • Gage increments are in .001" steps Minus tolerance: +0/-.0002". Fully hardened to 60-62 RC. Each gage is inspected and has a 10 Micron finish or better. Complete with plastic, element-proof fitted case..
Check Stock

ABS Import Tools 4103-1000 1\ P-7 Replacement Pin Gage, 0.0002 Tolerance, 2\ Length

  • Replace missing, damaged or worn-out Class ZZ Gages from existing sets and libraries.
  • Each pin is individually marked with the Size.
Check Stock

Milton S986 Service Gauge - Straight Foot Dual Head Chuck

  • Milton precision engineered service gages provide accurate, long life trouble free performance.
  • Plated brass tube and 4 sided nylon indicator bar.
  • Service Gage Straight foot dual head chuck 13 1/4" length 10 PSI to 160 PSI, 2 lb. increments 80 to 1100 kPa in 20 kPa increments.
  • 10 pounds per square inch to 160 pounds per square inch in 2 lb. increments or 80 to 1100 kilopascal in 20 kilopascal increments.
Check Stock

Mitutoyo 209-951 Digimatic Caliper Gage 0-1.18”/0-30mm Range.002 /0.04mm Accuracy.001 /0.02mm Graduation

  • Versatile OD measuring gages for groove thickness, tube thickness, and hard-to-reach dimensions.
  • Provide error-free LCD readings as well as data output for SPC analysis.
Check Stock