Reviews Straight Flute Reamers

Drill America 7/8 Bridge/Construction Reamer with Magnetic Hex Shank DWR Series

  • Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation.
  • Point is tapered to permit entry into overlapping holes. Short length facilitates use in areas with limited access.
  • Heavy-duty hex shank has six flats and is designed for portable pneumatic tools. For additional safety magnet inside the shank of reamer to secure in socket.
Check Stock

Drill America 13/16\ Bridge/Construction Reamer with Magnetic Hex Shank, DWR Series

  • Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation.
  • Point is tapered to permit entry into overlapping holes. Short length facilitates use in areas with limited access.
  • Heavy-duty hex shank has six flats and is designed for portable pneumatic tools. For additional safety magnet inside the shank of reamer to secure in socket.
Check Stock

Accusize Industrial Tools 7/8'' H.S.S. Straight Shank Straight Flute Chucking Reamer, Flute Length 2-5/8'', Oal 10'', Right Hand, 8 Flute, 5015-0245

  • 【Specifications】- Cutting Dia.: 3/4". High-speed steel tool is good for general purpose applications, with combination of hardness and toughness for wear resistance.
  • 【Uncoated Tool】- Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • 【Round Shank】- Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
  • 【Straight Flute Tool】- Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts.
  • 【Application】- Designed for accurate reaming in most materials, using all types of equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56018P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #3, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 3/16\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56026P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/4 " flute length, Partial Flute Length Carbide.
  • 1" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 2" flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock