Reviews Stm32f103ze Board

GoolRC Radiolink Byme-D Flight Stabiliser Flight Controller Gyroscope Self-Stabilization Balance for RC Airplane Fixed Wing Delta Wing Paper Plane SU27 F22

  • Product Name: Matek F411-WTE Flight Controller，STM32F411CEU6 OSD 2-6S Lipo.
  • IMU: BMI270, Barometer: SPL06-001, UARTs Softserial: 2x UARTs, 2x Full Softserial.
  • 2+4 PWM,4x ADC, Current sensor:132A, PINIO:2(Camera,VBat Power).
  • Regulators:5v 1.5A, Vx (5V/6V)5A, USB:Vertical Type-C, Dimensions: 31 x 26 x 16.5 mm,Weight: 10g.
  • INAV Target: MATEKF411TE ( INAV4.1 or newer).
Check Stock

STLINK-V3SET Microcontrollers ST STM8 and STM32 MCU USB Swim JTAG SWD Modular Stand-Alone in-Circuit Debugger Programmer SPI I2C CAN GPIOs @XYG

  • The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and....
  • The SWIM and JTAG/SWD interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board..
  • The STLINK-V3SET also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART, and....
  • The modular architecture of STLINK-V3SET enables to extend its main features through additional modules such as the adapter board..
Check Stock

Matek Systems F411-WTE 100MHz STM32F411CEU6 Flight Controller Built-in OSD 2-6S for RC Airplane Fixed Wing DIY Accessories Parts …

  • Product Name: Matek F411-WTE Flight Controller，STM32F411CEU6 OSD 2-6S Lipo.
  • IMU: BMI270, Barometer: SPL06-001, UARTs Softserial: 2x UARTs, 2x Full Softserial.
  • 2+4 PWM,4x ADC, Current sensor:132A, PINIO:2(Camera,VBat Power).
  • Regulators:5v 1.5A, Vx (5V/6V)5A, USB:Vertical Type-C, Dimensions: 31 x 26 x 16.5 mm,Weight: 10g.
  • INAV Target: MATEKF411TE ( INAV4.1 or newer).
Check Stock

5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch with 100M Transmission Distance

  • ON-BOARD ESP-01 WIFI MODULE: The relay board is equipped with on-board ESP-01 WiFi module and high performance microprocessor STM8S103..
  • UART DEBUG INTERFACE: The relay has reserved UART debug interface and STM8 SWIM program download interface..
  • SMART CONFIG TECHNOLOGY: The module uses smart config technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions..
  • ON-BOARD 5V RELAY: This relay module adopts On-board 5V,10A250V AC 10A30V DC relay, which can continuously pull 100,000 times with diode discharge protection and short response time..
  • WORKING STATUS INDICATOR: The module has board mode selection and real-time working status indicator..
Check Stock

Makerbase MKS Robin Nano V3 32 Bit Control Board 3.5inch TS35 Touch Screen for Creality Ender 3 V2 Pro 3D Printer Mainboard Replacement Parts Marlin 2.x Klipper with 5pcs TMC2209 WiFi Module

  • ...n Creality 3D printer ender-3, ender-3 v2, and ender-3 pro, with the color screen 3.5inch which is the great update version for FDM 3d printer for homeuse..
  • MORE POWERFUL PROCESSING CAPABILITIES: Makerbase 3d printer MKS Robin Nano V3.1 is an upgraded version of Robin Nano V2.0 and V3.0, change the MCU from the STM32F407VGT6 to STM32F407VET6. What is more, Robin Nano V3.1 improves the anti-interference performance, such as adding Schottky diodes to the temperature measurement circuit and MOS circuit, and adding TVS protection to the power input..
  • DIVERSIFICATION OF FUNCTIONS: This Creality ender 3d printer update tool kit also have the 3.5inch touch screen, which is the color display version TS35 very easy to use..
  • EXTENSIVE MATCHING WITH DISPLAY: Makerbase MKS Robin Nano V3.1 can work with TS35 touch screen display and also can work with MKS H43 LCD MINI12864 LCD2004, which can show showing RGB multi-color backlight with various color lights support knob to directly adjust settings.
  • BETTER FIRMWARE OPTIONS: The same as the Robin Nano V2.0, firmare of MKS Robin Nano V3.1 is also based on Marlin 2.X. Actually, we directly use the sae respository. Just modify the type of motherboard to compile the related firmware..
Check Stock

FYSETC 3D Printer Vorn 2.4 Big Dipper Motherboard New Upgrade Silent Control Board Based on Due 3 Mini 5+ WiFi with TMC2209 Stepper Motor Drivers Onboard for Vorn V2.4 V0.1 3D Printer CNC Machine

  • ...n Creality 3D printer ender-3, ender-3 v2, and ender-3 pro, with the color screen 3.5inch which is the great update version for FDM 3d printer for homeuse..
  • MORE POWERFUL PROCESSING CAPABILITIES: Makerbase 3d printer MKS Robin Nano V3.1 is an upgraded version of Robin Nano V2.0 and V3.0, change the MCU from the STM32F407VGT6 to STM32F407VET6. What is more, Robin Nano V3.1 improves the anti-interference performance, such as adding Schottky diodes to the temperature measurement circuit and MOS circuit, and adding TVS protection to the power input..
  • DIVERSIFICATION OF FUNCTIONS: This Creality ender 3d printer update tool kit also have the 3.5inch touch screen, which is the color display version TS35 very easy to use..
  • EXTENSIVE MATCHING WITH DISPLAY: Makerbase MKS Robin Nano V3.1 can work with TS35 touch screen display and also can work with MKS H43 LCD MINI12864 LCD2004, which can show showing RGB multi-color backlight with various color lights support knob to directly adjust settings.
  • BETTER FIRMWARE OPTIONS: The same as the Robin Nano V2.0, firmare of MKS Robin Nano V3.1 is also based on Marlin 2.X. Actually, we directly use the sae respository. Just modify the type of motherboard to compile the related firmware..
Check Stock

Creality CR-10 Smart Motherboard CR-10 Smart 3D Printer 32-bit Silent Mainboard with TMC2208+A4988 Stepper Driver V1.2 Silent Mother Board for CR-10 Smart

  • The main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance is greatly improved..
  • Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to avoid the worry of not....
  • Motor driver support :TMC5160,TMC2208,TMC2130,ST820,LV8729, DRV8825,A4988, etc.Display screen support: BIGTREETECH- 2.8 inch TFT,BIGTREETECH-3.5 inch....
  • Support Serial WIFI Online Printing. 6 motor drives, 3 extruders, 3 CNC fans. Reserve extended ports of BL Touch, PWM, ADC, UART, I2C and SPI.
Check Stock

BIGTREETECH SKR PRO V1.2 3D Printer Control Board 32-bit CPU Mother Board Support TMC2208 Stepper Motor Driver TFT35 Touch Screen for 3D Printer Part

  • √1.【SKR PRO V1.2】：Aiming at some problems existing in 3D printed motherboards in the market. Bigtree Technology Co., Ltd. launched a high....
  • √2. 【Main Chip】:The main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance....
  • √3.【Easy to Use】:Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to....
  • √4.【Display】:BIGTREETECH-2.8-inchTFT, and BIGTREETECH-3.5-inchTFT color touch screens are compatible, as are LCD2004 and LCD12864 screens.
  • √5.【Dual Z】: Support for dual Z axis printers (series dual Z).
Check Stock

AITRIP 3 PCS STM32F401 Development Board STM32F401CCU6 STM32F4 Development Board Learning Board for Arduino and Learning Board Plate Computer Office, Electronic Accessories

  • the board Can provide a platform for beginners, in practical applications, it will not be because of insufficient computing power, I0 port function is not comprehensive and hinders development high-quality material, durable, firm and stable for us to use..
  • STM32F401CCU6 core board 64KB RAM 256KB ROM.
  • The GND is changed to 5V B9 5V GND, which can directly connect a small steering gear without additional wiring and reduce development time..
  • 25MHZ high speed crystal oscillator 32.768k low speed crystal oscillator.
Check Stock