Reviews Stepped Wing Screws

Miller Dowel W12D11-100 Pack of 100 Each 1X Stepped Walnut Dowels 3/8 Inch Diameter for Stock up to 1 Inch Thick

  • Pack contains 100 each 1X stepped walnut dowels.
  • 1x stepped dowels are 2-5/8” long, 3/8" in diameter and designed for stock up to 1” thick.
  • Miller dowels uses a patented stepped drill bit and dowels that produce better, stronger joints with less effort and set up.
  • The stepped, ribbed dowel design reduces the amount of glue squeezed off as the dowel is driven home creating a stronger adhesive bond.
  • Miller Dowels are a suitable alternative to mortise and tenon, loose tenon, traditional blind or through dowel or biscuit joints requiring less set up and specialized machinery.
Check Stock

Noctua NF-A9 PWM, 4-Pin Premium Cooling Fan (92mm, Brown)

  • ...regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. Air flow – 46.4 CFM. Noise level – 22.8 decibels.
  • Noctua’s AAO (Advanced Acoustic Optimization) frames feature integrated anti-vibration pads as well as Noctua’s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan’s performance/noise efficiency.
  • Noctua’s Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity.
  • Integrated Anti-Vibration Pads made from extra-soft silicone minimize the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.
  • The NF-A9 features the further optimized second generation of Noctua’s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilization, precision and durability.
  • Supporting fully automatic PWM speed control, the NF-A9 PWM uses Noctua’s novel, custom designed NE-FD1 PWM IC that integrates Smooth Commutation Drive (S....
Check Stock

Wing Chun Dummy Portable Wing Chun Dummy Wall Mount, Wooden Man Pile Martial Arts Training Device, Adjustable Durable Arm Dummy Trainer, Easy to Assemble

  • 【 Durable Wing Chun Dummy 】 Made of solid wood and iron materials, high-density sponge bags, can be used for a long time. Traditional solid wood hand for more combat skills training..
  • 【 Small Space to Install 】 The martial arts training device accounts for a small position, and the height is adjusted as needed. Installed on a smooth surface or plywood, such as tiles, otherwise screws are required..
  • 【 Combination Dummy Sets 】 The length of the arm is 30 cm/11 3/4", and the diameter is 57 mm/ 2 1/4". Leg 52 cm/20 1/2" long. Martial arts enthusiasts suitable for outdoor park training are more friendly to beginners..
  • 【 Strength Training Device 】 The traditional wooden peg leg sweep will kick painfully, this product has a foam tube wrapped around the skeleton to prevent the leg from kicking painfully..
  • 【 Applicable to Various Sports 】 Portable wooden virtual wing spring is less harmful to daily training. For example: Taekwondo, Karate, MUAY, Thai Kick, Boxing, Wing Chun, Tai Chi..
Check Stock

Stainless Steel License Plate Screws | Rust Proof Screws License Plate Set of 4 Front or Rear Chrome Locking Screws | License Plate Security Screws to Secure Frames and Covers by USA Fastener Company

  • Universal license plate frame screws: The screws for license plate are 1/4" in diameter x 3/4" long for universal application in any truck, car, or motorcycle. Compatible with domestic and import cars (hyundai, toyota, honda, ford, kia, chevrolet, nissan audi, bmw, mercedes).
  • License plate screws rust-proof hardware - USA fastener company license plate wing screws are manufactured from from type 316 marine grade stainless steel. This is superior to lesser grades of stainless steel such as type 304 (which will eventually corrode) for corrosion resistance, especially in salty conditions..
  • Easy to install - We designed this set of premium automotive screws to be durable and easy to install. Simple screwdriver installation makes them easy to use for enthusiasts and casual users alike..
  • Chrome Finish License Plate Bolts Screws: We’ve developed the most attractive plates screws with fastener solution on the market to make your license plate screws and covers look stellar.`.
  • Better license plate mounting screws: license plate locking screws are new and improved with an updated, high-quality plating and durable finish for your automotive hardware needs. Nylon inserts not necessary..
Check Stock

TRIMOU Thicken Hinge Repair Plate Reusable Stainless Steel Hinge Repair Bracket Kit with Tapping Hole, Compatible with Mechanical and Self-Tapping Screws for Furniture Cabinet Cupboard Door (4Pcs)

  • Quantity & Accessories: Our products are made of 60PCS (30Pairs), including 300pcs black screws in 5/8inch & 60pcs door bumpers. The kitchen cabinet hinges without soft close, but it comes with door bumpers that make the cabinet doors and drawers close quietly..
  • Dimension & Finish: The overall length of the flat black cabinet hinge wing is 2 3/4inch. There is a hole at the center of the cabinet wing, which is 2 1/8inch. Projection:11/16inch.If you use the small hinge to make replacement kitchen cabinet doors, please refer to the picture and double-check with your old hinge. The semi- concealed matte black cabinet door hinges have black screws that make a statement in your kitchen..
  • Application & Installation: The variable matte black cabinet hinges are suited for the face frame cabinet with half overlay cabinet door and the traditional cabinet door hardware. The cabinet wing can be attached anywhere across the width of the face frame, making the black hinge compatible with doors of any overlay dimension.The door overlays are Easy to install, and they are attached to the surface of the cabinet and door and do not require a mortise..
  • Material and Features: The black hardware for cabinets is made of 1.5mm thick, heavy-duty metal used to connect your c....
Check Stock

Guuun G10 Grips for 1911 Compact/Officer, OPS Eagle Wing Texture - Red/Black

  • 1. Compact - These grips fit 1911 Compact / Officer..
  • 2. Made to last - CNC machined from strong durable non slippery G10..
  • 3. Aggressive - OPS Eagle wing texture provides a secure grip regardless of sweaty, greasy, or gloved hands..
  • 4. Precision machining - the grip are cut for ambi safeties and have a slightly beveled bottom, Measurement between two center holes: 2 11/16", thickness: 1/4"..
  • 5. Free 1911 Screws Set: 4 screws, 4 O-rings, T10 Torx keys included..
Check Stock

GODSHARK Screwdrivers Set 7pcs Repair Tool Kit for Apple MacBook Pro Retina and Air, MacBook Series 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018

  • Pentalobe 5 For opening the back panel screws, Support Macbook Air A1465 A1466 A1369 A1370, Macbook Pro with Retina Display A1425 A1502 A1398, Macbook 12 inch A1534.
  • Pentalobe T5 For taking off the Motherboard or Battery and fan screws, Support Macbook Air A1465 A1466 A1369 A1370, Macbook Pro with Retina Display A1425 A1502 A1398.
  • Package Contents: Pentalobe 6 + Pentalobe 1.2 + Phillips + Tri-wing Screwdrivers + helper stick. Warranty: 18 Month warranty, any problem, money back or replacement Phillips For opening the back panel screws, Support Macbook Pro old models A1278 A1286 A1297.
  • Pentalobe T6 For taking off the Motherboard or Battery and fan screws, Support Macbook Pro old models A1278 A1286 A1297.
Check Stock

shinedisk Screwdriver Set for Apple MacBook Pro Retina and Air, 6pcs Screwdriver Repair Tool Kit for MacBook, Fit for All of MacBook Series 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018

  • Pentalobe 5 For opening the back panel screws, Support Macbook Air A1465 A1466 A1369 A1370, Macbook Pro with Retina Display A1425 A1502 A1398, Macbook 12 inch A1534.
  • Pentalobe T5 For taking off the Motherboard or Battery and fan screws, Support Macbook Air A1465 A1466 A1369 A1370, Macbook Pro with Retina Display A1425 A1502 A1398.
  • Phillips For opening the back panel screws, Support Macbook Pro old models A1278 A1286 A1297.
  • Pentalobe T6 For taking off the Motherboard or Battery and fan screws, Support Macbook Pro old models A1278 A1286 A1297.
  • Tri-wing For taking off the battery screws, Support Macbook Pro old models A1278 A1286 A1297.
Check Stock

POWERTEC 71169 48-Inch Universal T-Track with 2 Hold-Down Clamps, anodized blue

  • Set includes one 48” universal (stepped) t-track and two 5-1/2” x 1-1/8” hold-down clamps for solid support and versatility in your benchtop applications. Please note: wood screws are not included..
  • Provides solid, beefy clamping hold for work materials with thickness up to 2-1/2” in your universal t-tracks.
  • Handy tightening 5-star knob provides optimal adjustability.
  • heavy rubber clamping-pads enhance grip and won’t mar stock.
  • Precision-machined 3-1/2” x 5/16" t-bolts and washers included.
  • Aluminum t-track construction ensures maximum durability. Easy to install and use.
Check Stock