Reviews Steel Railing

BLIKA 120 Pack Stainless Steel Protector Sleeves for 1/8' Wire Rope Cable Railing, Cable Railing Protector Sleeves, Deck Cable Railing Kits

  • Applications: This Stainless Steel Protector Sleeves for 1/8" Cable Railing. And used on wood/composite posts to prevent the cable from wearing into the wood. Perfect for planning your own cable railing project, good for indoor or outdoor applications..
  • Material: Made of Stainless Steel T316 Marine Grade, High tensile strength and anti-fatigue strength Weatherproof. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Cable railing system requires hardly any maintenance..
  • Size: Suitable for 1/8" cable railing. Overall Length of Sleeve = 0.8 inch, Flange Diameter = 0.474 inch, Required Hole Diameter = 0.251 inch..
  • Feature: This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Easy to install and provides a stylish and contemporary finish to any project, whether used indoors or outdoors, residential or commercial..
  • Package List: 120 Pcs 1/8 inch Stainless Steel Protector Sleeves and A Free Drill Bit..
Check Stock

Ingpro 80 Pack 316 Stainless Steel Left&Right Handed Thread Swage lag Screws for 1/8\ Decking Cable Railing Kit/Hardware,Wood Post Balusters (40 Pairs)

  • This cable railing kit（Single lag screw） made of high quality Marine Grade T316-Stainless Steel，It is anti-rust、 durable and easy to maintain；.
  • The angle of this professional Single-Screw cable railing hardware 0 to180 degrees could be free adjusted；So they can be used to all kinds of complex cable railing system：railing of stairs，deck railing and Garden fence…；.
  • This cable railing hardware applies to standard 1/8" inch cable（OD）， Hydraulic crimper is required to connect this kit with the cable and the 4-6# dies is suitable.
  • The length of the screw is 2 inch, Pre-drilling screw holes is required before installation；The turnbuckle fully extended length is 10 inch and fully shortened length is 6-3/4 inch (Size details are shown in the figure).
  • This kind of cable railing fitting advantage：high quality、easy to install and looks clean..
Check Stock

Neitra 30 45 90 Angled Drill Guide Jig for Cable Railing Lag Screw Kit Wood Post, Drilling Degree Angle and Straight Holes, Durable All Metal Drill Jig for Railing Deck Stair Handrail

  • ACCURATE THREE ANGLES: The Neitra cable railing drill guide jig dowel allows you to drill 30°, 45°, and 90° angle holes for wooden stair railings and deck posts. The angles are fixed with no deviations, and you can quickly drill accurate 30°/45°/90° angle holes with an impact drill in the posts and railings, saving you time and effort and getting the work done quickly..
  • FOUR SIZES GUIDE HOLES: With four sizes of drilling guide holes for each angle, 3/8″(9.52mm), 5/16″(7.93mm), 1/4″(6.35) mm), 3/16″(4.76mm), each compatible with most cable railing cable protector sleeves and lag screws. An efficient and compact angled drill guide that is easy to carry..
  • ALL HARD METAL MATERIAL: The drill jig for angled holes is set with ultra-hard chrome-plated steel sleeves, which is wear-resistant, sturdy, and durable, no need to worry about being worn when drilling, and the drilling accuracy is error-free as always. The main body of the railing drill guide is made of high quality industrial grade aluminum alloy, hard and durable, with CNC anodized surface, wear-resistant and corrosion-resistant, clear markings..
  • EASY OPERATION: This drill guide for angle drilling can be used with locking C clamps and F clamps to prevent the drill jig from wobbling while ....
Check Stock

Drill Jig for Angled Holes-Portable Aluminum Drill Guide for Straight Holes 30 45 90 Degrees with 4 Sizes Guide Holes Durable Drilling Jig for Cable Railing Deck Stair Handrail

  • Multiple Sizes: The drill jig for straight holes has four sizes for each drilling angle, which are 3/8”(9.52mm), 5/16”(7.93mm), 1/4”(6.35) mm), 3/ 16"(4.76mm), compatible with most cable railing lag screws. You can fix the steel sleeves by tightening the set screws to prevent the steel sleeves from falling off during drilling..
  • Accurate Three Angles: The drill jig for angled holes allows you to drill 30°, 45°, and 90° angle holes for wooden stair railings and deck posts. The angles are fixed with no deviations, and you can quickly drill accurate 30°/45°/90° angle holes with an impact drill in the posts and railings, saving you time and effort and getting the work done quickly..
  • Hard Metal Material: The drill guide for straight holes is set with ultra-hard chrome-plated steel sleeves, which are wear-resistant, sturdy, and durable, no need to worry about being worn when drilling. The main body of the railing drill guide is made of high-quality industrial grade aluminum alloy, hard and durable, with CNC anodized surface, wear-resistant and corrosion-resistant, and clear markings..
  • Scope of Application: This drill guide for angle drilling can be used with locking C clamps and F clamps to prevent the drill jig from wobbling while drilling, and al....
Check Stock

Muzata 2Pack 6 6 Stainless Steel Handrail Black Rectangular Handrail Flat Top Rail Cable Railing System Deck Stair Indoor Outdoor HT10 BP4

  • IMPORTANT to know before purchases - This item only contains 2pack 6'6" STAINLESS STEEL flat handrails. To avoid mismatch of accessories, please search following models to build your complete railing project: Muzata HA01 extension connector, HA02 90° corner connector, HA23 vertical pivot connector, HA24 level pivot connector, HA12 end cap, HA33 end bracket. You can check the bundle sets below to save time.
  • Material difference - Muzata offers both stainless steel handrails HT10 and aluminum handrails HL10 to suit specific needs. Please check the model number to avoid mismatches. Both handrails enjoy excellent waterproof and corrosion resistance. However, if your project is located near the seaside or humid areas, aluminum handrails are highly recommended for its super strong salt tolerance.
  • Wide applications - Muzata HT10 flat handrail can work with both metal and wood posts. It is widely used at residential and commercial areas. Recommended to work with Muzata black aluminum posts PD01 PD02 PW01 or stainless steel posts PS01 PS02 PF01 PF02. Search Muzata DG01 to find matched cable railing gate.
  • SpaceSaver System - SpaceSaver cable railing system is pre-designed to help you get a fully customized cable railing project. Components to build SpaceSaver sys....
Check Stock

Wayska 60 Pack T316 Marine Grade Stainless Steel 30 Degree Angle Beveled Protector Sleeves, Wood Post Protector for 1/8" Wire Rope Cable Railing, Come with a Free Drill Bit

  • 【High Quality Material】- This 30 degree 1/8” wood post protector is made of T316 marine grade stainless steel, high tensile strength, anti-fatigue strength and waterproof. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Cable railing system requires hardly any maintenance. .
  • 【Compatibility & Parameter】- These stainless steel protector sleeves suitable for 1/8”cable railing, perfect for outdoor and indoor cable railing system. Tilt Angle = 30 Degree, Overall Length of Sleeve = 1.1", Sleeve Diameter=0.28"，Flange Diameter =0.58"(The longest diameter of an ellipse)/0.51"(The shortest diameter of an ellipse), Drill Bit Diameter = 7mm..
  • 【Easy to Install】-This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Easy to install and provides a stylish and contemporary finish to any project, whether used indoors or outdoors, residential or commercial..
  • 【Package Content】- 60pcs 30 degree angle cable protector sleeves + 1pcs drill bit..
Check Stock

Saiksa Black Cable Railing Hardware, Steel Cable Railing Kit for 1/8" Stainless Steel Cable Railing System, for Metal & Wood Post, Turnbuckle Tensioner and Fixed Terminal 10 Pairs

  • Hidden - With this cable railing hardware, it can be hidden in wooden or metal post railings to give a nice looking cable railing..
  • Cool Black - This cable railing kit is plated with a high quality black coating, which is wear-resistant and durable, will not fade, cool black beautiful..
  • Rust Resistant - These cable railing hardware are made of T316 stainless steel, which is rust resistant and durable for indoor and outdoor use..
  • For 1/8" Cable - This cable railing kit for 1/8" cable railing system, for metal and wood posts..
  • Items Include - 10pcs Turnbuckle Tensioners, 10pcs Fixed Terminals, 1 hex wrench..
Check Stock

40 Pieces T316 Beveled Washer Angle Washer Stainless Steel Stainless 1/4 Inch 30 Degree Washer for 1/8 Inch to 3/16 Inch Cable Railing Wood Metal Aluminum Posts DIY Balustrade

  • Main function: these stainless steel angled beveled washers are designed for termination on end posts that have angled, or off set holes on stair railings, which can be screwed with threaded end terminals, suitable for short and long stud terminals, and even for tuner terminals.
  • Size information: the 30 degree angle beveled washer comes in 1/4 inch in inner diameter and 5/8 inch in outer diameter, that suits for 1/8 inch and 3/16 inch staircase deck cable railing.
  • Applicable to 1/8 inch stainless steel cable and threaded terminal stud end fitting.
  • Reliable material: made of T316 marine grade stainless steel for maximum durability, our angled beveled washers with high tensile strength and strong resistance to rust and corrosion, can serve you for quite a long time.
  • Applicable occasions: these reliable stainless steel angled beveled washers are practical and versatile for your own cable railing project and big scale indoor and outdoor applications, ideal for the the angle of garden, aluminum post of decking or stairs and aisle railing kit.
  • Package included: you will receive 40 pieces 1/4 inch 30 degree angled beveled washers at once, enough quantity with fine workmanship that will satisfy your indoor or outdoor applications, practical for wood, steel, alum....
Check Stock

Muzata Drill Guide for Cable Railing Kit Lag Screw Fitting Wood Post Installation, Fit 90 Degree Horizontal Deck and 45 Degree Angled Stair, Visible Drilling Template Jig, Patent Design CT10,CT1

  • Accurate and Multi-Angle – This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes and 45 degree angled holes for the wood railing posts. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill. Package includes: 1pc drill guide.
  • Various hole sizes – This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”, 1/4”, 5/16”, 3/8” drill bit), compatible with most cable railing kit hardware. The hole drilled by 1/4” drill fit most 1/8″ cable railings lag screws. You can fix the steel sleeves by tightening the anchor screws to prevent the steel sleeves from falling off during drilling.
  • Visible and Portable – The drill guide is made of transparent acrylic with excellent visibility that you are easy to position accurately on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System – We pre-designed a cable railing system to help you construct a beginner-friendly wood system. It includes 1/8″ togg....
Check Stock