Reviews Steel Pipe Pipeline

Automotive Smoke Machine Leak Detector, EVAP Vacuum Leakage Diagnostic Tester with Pressure Gauge & Flow Meter for All 12V Cars

... 【ADJUSTABLE AIR FLOW METER & PRESSURE GAUGE】You can easily control the air pressure, because if the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected.
You can observe the barometer to determine whether the car pipeline is leaking. If the barometer index keeps increasing, there is no problem with your car’s pipeline. On the contrary, your car’s pipeline leaks need to be repaired..
【WIDE COMPATIBILITY】Fuel pipe leakage locator is used to detect leakage of pipe systems on automobiles, motorcycles, snowmobiles, ATVs, light trucks, and speedboats. It is suitable for all makes and models of cars..

Check Stock

Automotive Smoke Leak Detector Tester EVAP Smoke Machine with Dual Mode

...es not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 7-15 seconds, dramatically reducing diagnostic time. Smoke output value: 1-6L/min..
【Flow Meter & Pressure Gauge】According to the pressure of the detection pipeline, it is controlled with a flowmeter to more effectively protect the pipeline from damage. By observing the pressure gauge, you can determine whether the pipeline is leaking more quickly and accurately. Usually the pressure gauge continues to rise, indicating that there is no problem with the pipeline. If the pressure gauge continues to decrease, Explain that the pipeline leak needs to be repaired..
【EVAP Detection】American cars that began production in 1996 are equipped with EVAP service ports.
in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection syst....

Check Stock

1/2inch Rigid Pipe Strap Clamp, Two Hole Strap,U Bracket Tube Clip, Stainless Steel Heavy Duty Pipe Fasten Holder, 50Pcs (20mm)

This Clamps accommodates 20mm (1/2") pipe and has 2 holes to secure it in place. Suitable for holding various pipes or rods like PVC. The screw hole diameter is 4mm (0.15")..
Made of 304 stainless steel, with 0.6mm rigid thickness, the pipe clamps are highly resistant to corrosion and rust, strong, durable and sturdy..
Use in pipe fixing on various surfaces and support structures, great for fixed pipeline with oil, water, gas medium in metallurgy, petroleum, chemicals, vehicles, ships, power hydraulic systems..
These u shape clamps are strong enough to hold your pipe or rod securely. Reinforced steel for extra strength..
Only need to cooperate with screws can be installed, convenient and fast, resistance to heat up and cold shrink, the surface is polished, anti-oxidation, long-term service..

Check Stock

Piutouyar 50 Pack 12MM Two Hole Strap U Bracket 304 Stainless Steel Rigid Pipe Strap Clamp Heavy Duty Tube Strap Tension Clip (1/2 Inch)

【SIZE】- Fit Pipe Diameter: 60mm/ 2.36".
Total Size: 107 x 18 x 60mm / 4.21" x 0.71" x 2.36" (L*W*H).
【MATERIAL】- Made of 304 stainless steel, strong rust and corrosion resistant for a long time use.
【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
【PACKAGE CONTENT】- 5Pcs × Rigid Pipe Strap.

Check Stock

KOTVTM 2" Stainless Steel Elbow 45° Mandrel Bend Elbow - 1.5D/3" CLR Loose Radius - 16GA/.065" Wall - 2" Legs - SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Pipeline engineering, etc

【Material】: SS304 Stainless Steel 45° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, Pipeline engineering, etc.
【Quantity】: Single Elbow. 100% brand new.

Check Stock

M40 1 1/2 Inch Stainless Steel Rigid Pipe Hole Strap,with 2 Holes Cable U Bracket Clamp Hanger，Heavy Duty Rigid Pipe Strap Clamp 30 PCS

【Material】Made of 304 stainless steel. After punching, bending, and integral molding, the reinforcing rib structure is added to improve the....
【Secure Conduit】Ensure that your conduit is safely secure with these 2-hole EMT Pipe Straps that feature reinforced holes and a reinforced rib for....
【Reinforcing Rib Design】The middle part is prominent, larger load bearing, to make pipe strap not easily to deformed during using..
【Application】Pipe clamps use to secure rigid or IMC conduit to wood, masonry, widely used in fixed pipeline such as stainless steel pipes, rubber....
【Easy to Install】 Two Holes u bracket easily secure piping to studs or joists to reduce vibration noise, great improves its safety.

Check Stock

3Pcs 4 inches Two Hole stainless steel U-shaped pipe card for Pipe, Greenhouse AssemblyFixing on Various Surfaces and Support Structures

Package included：3Pcs U-shaped pipe card.
Material：These Rigid Pipe Straps are made of good quality stainless steel, sturdy and durable ,anti rust and corrosion.
Easy to install：These u shape clamps are strong enough to hold your pipe or rod securely. Only need to cooperate with screws can be installed, convenient and fast. Mounting screws are not included here!.
Wide Application： Our u brackets could be used in pipe fixing on various surfaces and support structures, great for fixed pipeline with oil, water, gas medium in metallurgy, petroleum, chemicals, vehicles, ships, power hydraulic systems..
Our Advantage：These u shape clamps are strong enough to hold your pipe or rod securely. And they won't oxidize even exposed to harsh environment for a long time. So that you could use them without any worry..

Check Stock

Nge 4inch Rigid Pipe Strap Clamp-Two Hole Strap-U Bracket Tube Clip-Stainless Steel Heavy Duty Pipe Fasten Holder-Secures Conduit，4Pcs（115mm)

This Clamps accommodates 4inch pipe and has 2 holes to secure it in place. Suitable for holding various pipes or rods like PVC. The screw hole diameter is 6.5mm (0.26")..
Made of stainless steel, with 0.6mm rigid thickness, the pipe clamps are highly resistant to corrosion and rust, strong, durable and sturdy..
Use in pipe fixing on various surfaces and support structures, great for fixed pipeline with oil, water, gas medium in metallurgy, petroleum, chemicals, vehicles, ships, power hydraulic systems..
These u shape clamps are strong enough to hold your pipe or rod securely. Reinforced steel for extra strength..
Only need to cooperate with screws can be installed, convenient and fast, resistance to heat up and cold shrink, the surface is polished, anti-oxidation, long-term service..

Check Stock

LOKMAN 50 Pack 1/2 Inch PEX Cinch Clamps, Stainless Steel Cinch Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (1/2 Inch)

HIGH QUALITY- 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion, construction..
360 °SEAL PROTECTION - These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. Great secure in any PEX pipe using system..
WIDELY USED- Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
WIDELY APPLICATIONS - Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc. Providing a strong and reliable crimp fitting application..
SIZE - 1/2 inch (17.5mm) PEX cinch clamp rings, fit for 1/2 inch PEX pipe..

Check Stock