Furnigear Plastic Plugs Tubing End Caps Chair End Caps 3/4” Inner Size Tubing Caps Round Furniture Sliders Glides Black(40pack)

  • ❤Furnigear 3/4” Black Plastic Plugs End Caps (40pcs), perfect fit for 3/4” (0.68-0.75”) inner size of pipe tubing. Outside diameter is 0.78”. Warm tips: Please measure your chair leg (inner size) and choose correct size..
  • ❤Plastic Plugs for Use in Plugging Holes: Plastic hole plugs fit for stainless steel pipe, aluminum, metal and other tubular poles. Chair end caps keep sharp parts from being exposed, scratch the floor or accidentally injure your family..
  • ❤Chair Leg Caps Fit for Homemade and Outdoor Projects. Best chair glide for your kitchen stool legs, barstool chairs, fence post caps. Replacement for patio furniture leg protectors, stainless steel railing pipe, other tubular or any round opening..
  • ❤Easy to Install: Plastic plugs insert snapped right into tube or hammer plugs in. Installs easily and securely. Lasting protection and prevents scratching of your floor surface and protects your expensive furniture when furniture is moved..
  • ❤40 Pack 3/4″ Round Plastic Tubing end caps made by high quality plastic material and no odor smells,4.5mm thicken bottom, durable chair glide. Best furniture slider for carpet, moving easily. Chair leg inserts for metal legs, keeping securely..
Check Stock

HORUSDY 5-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

  • Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
  • Right-hand cutting tool has a clockwise cutting function..
  • NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14. Equipped with special storage box..
  • Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

Mofeez Gate Wheel for Metal Swing Gate with 1-5/8\ Thru 2\ Gate Frames, Gate Support Wheel for Chain Link Fence, Prevent Gate from Dragging

  • Support Door Weight Up to 500lbs---Tire grade solid rubber material, supper wear-resistant. Hot dipped galvanized finish steel for rust free..
  • Universal Use--- Mofeez gate helper wheel rolls easily over concrete/ grass/ pasture ground. If you plan to use it on soft pea gravel, we suggest you put something in the ground along the wheel path for it to ride more smoothly..
  • Lift your Gate Up to 8-3/4"--- Diameter:6”. There is 8-3/4" from the bottom of the wheel to the center of where the pipe would attach, so the door could be lifted up to 8-3/4". Width of tire:1-1/2” flat wheel will roll over your driveway's crushed rock surface..
  • Only for Round Fencing Pipe--- Helper gate wheel could be used on both pipe farm gates, chain link gates or any other gate that has a bottom ROUND pipe measuring 1-5/8” through 2”. NOTE: Check your gate frame diameter first..
  • Easy to Install --- Just prop the gate up to the height you need and attach the wheel on the bottom rail of the gate. Tighten U-bolt nuts securely until helper gate wheel couldn’t slip around the pipe..
Check Stock

YG-1 - J0283 J0 Series Vanadium Alloy HSS Spiral Pointed Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, 8-32 Thread Size, H3 Tolerance

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

Drill America - DWT64119 1/2\-14 NPS High Speed Steel 4 Flute Straight Pipe Tap, DWT Series

  • Nominal size is that of the pipe fitting being tapped.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Ideal for cutting internal threads in pipe fittings and whenever an extremely tight fit is required.
Check Stock

DBM IMPORTS Manual Pipe Tube Roller Bender Rolling Tubing Round Flat Square Bending Steel Hand Operate

  • Round Pipe Capacity: Max. 1.18" x 0.04" (30 x 1mm).
  • Flat Steel Capacity: Max. 1.5" x 0.40" (40 x 10mm).
  • Square Steel Capacity: Max. 1.57" x 1.57" x 0.04" (40 x 40 x 1mm).
  • Unit Dim L x W x H (in): 21 x 15 x 16-1/2 *Estimated*.
Check Stock

Bonvoisin 3/8 1/2 OD Tubing Bender 2 in 1 Manual Pipe Bender 180° HVAC Soft Copper Aluminum Pipe Bending Tool for Air Conditioning Refrigeration Repair

  • [Parameters] - Application: only for copper / aluminum pipes.
  • [High Quality] - The tube bender is forged from high-quality carbon steel, which is light and durable.(NOTE: if the pipe wall thickness.
  • [2-in-1] - This tubing bender tool is a 2 in 1 tool and will fit 3/8’’、1/2’’ tubes, which is convenient for different size tube bending and....
  • [Humanized Design] - (1)The manual pipe bender uses the principle of leverage, with which you can easily bend the pipe. (2)The round hole of the upper....
  • [Wide Applications] - This pipe bender is suitable for HVAC, air conditioning, and refrigerator pipe repairs..
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stock