Reviews Steel Building Fittings

Pack of 8 NUZAMAS Bed Brackets, Heavy Duty Bed Hinges, Connector for Bed Corner Fixings, Bed Frame Hardware Rail Bracket Fittings Fastener

Set of 8 NUZAMAS Bed Frame Brackets, Bed Rail Fittings, 4 right and 4 lefts, made of hardened metal, idea for timber beds of any size..
These bed rail fittings are designed to any building a timber bed or replacing the old brackets on an existing bed.
It is easy to use, simply screw the plate flush with the end of your side rail, then set the bracket at the desired height. When it is done, the plate will just slot into the bracket firmly and securely.
Comes with installation screws for your convenience.
2.5mm extra thick for more strong support, fix your rickety bed in one go.

Base 20 Nozzle Stainless Steel Mist Kit Includes: 250 psi mid pressure pump with built-in solenoid and filtration 38ft Stainless Steel tubing for push lock (Pre-cut 2ft sections) 22ft UV coated Flexible 1/4" feed line 20- Nickel Plated Push Lock Misting Tees 1- End plug 2- Nozzle plugs 20- Nickel plated brass/stainless steel Nozzles (0.012") Stainless Steel Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
Misting Pump Features : Stainless Steel Mist Line Whisper quiet operation Built in Solenoid Valve Built in Filtration Outdoor Enclosure Wall Mountable Steel Enclosure Max Pump Pressure 250 Psi 110v AC Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable high pressure push lock fittings Stainless Steel Clamps.
Applications Include : Residential Patio Misting Greenhouse Humidification Commercial Outdoor Cooling Outdoor Restaurant Misting Industrial Misting.
Do it yourself misting system, easy to install, with Push to Connect Nickel plated fittings, rated for 1800 PSI..

Chill your wort like the professionals do!.
A full 18' of contact area for your wort! The tube-within-a-tube design allows for hot wort to flow through the chiller in one direction, while cooling water flows the opposite direction in a cooling jacket surrounding the wort..
Threaded Stainless Steel Fittings for ALL Connections (unlike units from other manufacturers). No Brass Connections and No flimsy tubing clamps required..
Solidly constructed of 304 grade stainless steel with 1/2" NPT Wort Fittings and Male Garden Hose Threaded Water Fittings..
Low Flow Restriction: Gravity feed your wort or use a pump. The choice is yours!.

STEEL CABLE RAILING FITTINGS – This hand swager crimper is perfect for crimping the stainless steel fittings of cable railings and boat rigging..
Provides 8 US tons of crimping force for use with swaging 1/16″~1/4″ inch fittings onto 1/16″~1/4″ wire rope cable,.
This cable cutter is designed for cutting steel wire which up to 5/32”, If you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do. after 200 cuts off the 1/8” 7×7 assemble coated steel security cable it still very sharp and clean cut.

{SYSTEM COMPONENTS} Base 10 Nozzle Mist Kit Includes: 1- 250 psi mid pressure pump with built-in solenoid and filtration.
10- cleanable brass/stainless steel Nozzles (0.012").
Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
{MADE IN USA PUMP} Whisper quiet operation Built in Solenoid Valve.
Outdoor Enclosure Wall Mountable Enclosure Max Pump Pressure 250 Psi 110v AC (Available in 12vdc and 220v on request) Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable push lock fittings.
{APPLICATIONS) Residential Misting, Industrial Cooling, Warehouse Misting, Outdoor Restaurant.
{FITTINGS FEATURES} Fittings are Brass /Nickel Plated Fittings - to Make your Misting System more durable.
{SUPPORT} 24/7 Support from mistcooling Texas. MC12080-MC12092.

CONVENIENT TRAILER E TRACK KIT - This kit includes everything you need to get you started with your E Track System! The kit includes E Track Rails, Ratchet Straps, E Track Fittings with O-Ring, J Hook Fittings, End Caps and a storage bag!.
EASY TO USE - The included Cargo Straps, O-Ring Tie Downs, J-Hook Fittings, and Storage Bag all have E-Fittings which makes it easy to snap them in and out of the E Track Rails so you can customize your setup depending on what you are hauling..
BUILT TO LAST - Our E Track Rails, Cargo Straps, and E Track Accessories are made from high-quality materials such as galvanized steel and 6,000 lbs polyester webbing. They're strong and durablE - so you can secure your cargo with confidence..
KIT INCLUDES - (4) 5' Horizontal E Track Rails, (8) Plastic End Caps, (6) Straps (12', 16' and 20', 2 each), (4) O-Ring Fittings, (2) 2" J Hook Fittings, (2) 4.5" J Hook Fittings and (1) Storage Bag. NOTE: Hardware to fasten the Track not included..
SPECS - E Track Rails Made of 12-gauge Galvanized Steel | Cargo Straps Working Load Limit (WLL): 1,467 lbs. |....