Reviews Steel Band Clamps

East Lake Axle replacement for front left cv axle Arctic Cat 550/650 / 700 Prowler 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015

  • 1, 【What Will You Get】We prepared 12Pcs small stainless steel cv boot clamps and 12Pcs large clamps for fixing cv boots in this kit!.
  • 2, 【Wide Application】Suitable for inner or outet CV joints on most cars and light commercial vehicles, 100% brand new , professional manufacturing, steel clamp is the best replacement for your old one. A perfect replacement for your car broken drive shaft CV boot clamp..
  • 3, 【Simple to Use 】There is the band that goes round the boot, and then a part of it sticks up like a upside down U and the rest of the band clips into place over the other end of the band making a full loop. You get it as tight as you can then use the pliers to pinch the U shut to tighten it the rest of the way. This would be easier with a drawing..
  • 4, 【 High Quality】The cv boot clamps are made of non-magnetic stainless steel material, which is an ideal choice for areas that get a lot of rainfall or snow because the metal is resistant to rusting and very durable..
  • 5, 【100% Satisfaction Guarantee 】 We promise to provide every customers with 100% satisfying shopping experience. If you come across any issues during use our products, please feel free to contact us by email, we will be here to help..
Check Stock

Hilitchi 304 Stainless Steel T-Bolt Clamp Heavy Duty T-Bolt Pipe Tube Hose Clamps (6PCS, 20-22MM)

  • ✅【ABOUT MATERIAL】Whole body of the hose clamp (including the band, housing and screw) are made of 304 stainless steel with fine polishing treatment, which makes it more durable, rust - proof, wear - resistant and secure ducting tightly..
  • ✅【VARIOUS SIZES AVAILABLE】Multiple specifications are available. Clamps can be adjusted to a minimum diameter 20mm/0.78inch and a maximum 22mm/0.86inch..
  • ✅【EASY AND QUICK INSTALLATION】Removable installation, clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque..
  • ✅【CAREFUL DESIGN】Folding turn edging process of the band, these clamps could prevent the sharp edges from cutting the pipeline..
  • ✅【WIDE APPLICATION】Clamps are widely used in our daily life, auto parts, reinforcement and in used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor or outdoor. If you do not satisfied with our products, please come to us and we would work a satisfactory solution for you..
Check Stock

Winlong Stainless Steel Hose Clamps 1.5 15PK SAE 24 Worm Gear Hose Clamps Adjustable 1 inch-2 Inch 25-51mm for Automotive Plumbing, 1 1/2’’ 1 3/4 1 1/4’’ Hose Clamps

  • Remarkable Performance: Winlong SAE 24 stainless steel hose clamps of 25mm-51mm are high torque, easy to install, adjustable range, secure hold and....
  • Premium Materials: Winlong hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to....
  • Effortless Installation: Winlong size 24 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight....
  • Wide Applications: Winlong stainless steel hose clamps are perfectly suitable for home, automobile, industrial, gardening, mechanical, electronic,....
  • What You Will Get: Winlong, founded in 2005, ISO 9001 and TS 16949 certified, manufactures hardware products such as hose clamps. You will get 15 Pack....
Check Stock

Cv Joint Ear Clamp Banding Tool Cv Boot Clamp Pliers Automotive Hose Axle Plier for  ATV UTV Most Cars Boot Clamps

  • Design:The CV joint boot clamps pilers are newly.With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively.Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • Funnction:This CV joint boot clamps pilers are key tools to fix the CV boots.They are used to bind, tenseion and sercure CV boot banding straps It helps you work morequickly.Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses..
  • MATERIAL:CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish.It looks much more shinning and it is totally rust adn corrosion resistant. Safe and durable..
  • APPLICATIONS: Use with any banding up to 2/5-inch (10mm) in width and vacuum hoses,for Ear-Type Clamp Crimping or Removal on for Audi, VW, BMW, Mercedess, Honda, Mazda Vehicles to crimp and flatten the clamp on Ear-Type constant velocity joint boot clamps,also be used for securing ATV UTV boot clamps..
  • CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers AKA cv Clamp Band,cv Clamp Pliers,cv Clamp Tool,cv Boot Clamp Pliers,cv,Boot Clamp Kit,cv Boot Clamp Tool,cv Boot Clamp Pliers ....
Check Stock

Tabazy CV Joint Banding Tool with Cutter, Ear Clamp Pliers with 8pcs Single Ear CV Boot Clamps Tool Kit,

  • Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • CV Joint Clamp Banding Tool: Made of high quality steel, use with banding straps up to 10mm (0.39in) wide, 0.6mm(0.02in) thick, with a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. (NOTE: The banding straps are not included, only ear crimp clamps shown in the picture are included. ).
  • Material of Ear Clamp: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
  • Ear Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275" (7mm) in width &....
Check Stock

304 Stainless Steel Hose Clamp Assortment Kit DIY Cut-To-Fit 12 FT Metal Strap + 8 Stronger Fasteners Large Adjustable Worm Gear Band Hose Clamps Screw Clamps Duct Pipe Metal Clamp Strapping

  • DIY Hose Clamps: Our hose clamp assortment is an awesome kit for you to determine your own size of worm clamps. Anytime to get odd sizes 2.5'' or extra large 45'' which are rare to find in the local stores..
  • Super Easy To Use: In our second image or package, you could please read the instructions. 30 seconds to 1 minute fast setup! If you do not have a snip on hand, DON'T WORRY! Please use a plier to bend the metal hose clamp strap back and forth, it will be cut easily. A nut driver for our screw clamp with 5/16'' hex head is available..
  • Cost Effective: No longer need to stock different sizes of pre-made stainless hose clamps. It is more flexible to make hose clamp large as 14 inch 16 inch 18 inch 20 inch 24 inch 30 inch 40 inch! The standby materials come in handy for future projects!.
  • Hose Clamps Stainless Steel: 12 FT strap and 8 PCS fasteners are all made of high quality 304 stainless steel, NOT 201 SS. These worm gear clamps will last forever, reusable, anti-rust and anti-corrosive, very suitable for outdoor use!.
  • No Jamming No Slipping Fasteners: The steel sheet of our hose clamp fasteners is thicker! It keeps the stainless strapping strong and heavy duty. The screw grips the strap band tightly so that the band clamp can be tightened! The worm driv....
Check Stock

Clamp Pliers with CV Boot Clamps Kit, Ear Boot Tie Pliers,Stainless Steel Universal Adjustable AXLE CV Joint Boot Crimp Clamp Kit,Hose Axle Plier CV Clamp Tool CV Joint Banding Tools

  • 【High-quality】CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots..
  • 【 2 Pcs CV Joint Boot Clamp Pliers 】 The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • 【24 Pcs CV Boot Clamp】Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
  • 【Package Included】:1*CV Clamp Tool,1*CV Joint Boot Clamp Pliers,12*Small CV Boot Clamps,12*Large CV Boot Clamps.
  • 【CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers】 The CV joint boot clamps pilers are newly.AKA cv Clamp Band,cv Clamp Pliers,cv Clamp Tool,cv Boot Clamp Pliers,cv,Boot Clamp Kit,cv Boot Clamp Tool,cv Boot Clamp Plier....
Check Stock

9pc Hose Clamp Pliers, Hose Clamp Remover Kit with Flexible Wire Long Reach Hose Clamp Clic R Type Swivel Jaw and Flat Band Pliers for Automotive Coolant Radiator Heater and Water Hose

  • ...spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines.
  • PERFECT FIT: Each pair of our well-engineered hose pliers works with hose clamps from 11/16 inch to 2-1/2 inches: the flexible hose clamp pliers, the swivel jaw band clip and spring wire clip pliers, and regular and angled flat band hose clamp pliers for spring-type clamps.
  • the Clic-R collar pliers for ear-type clamps.
  • and the hose removal pliers for most standard clamps.
  • LOCKING DESIGN: The user-friendly locking mechanisms of the 5 spring clamp-compatible pliers keep your clamps held open, freeing your hands and speeding your work.
  • DURABLE & COMFY: Our clamp pliers are constructed from durable structural steel, blackened to offer you maximum strength and corrosion resistance.
  • the easy-grip rubberized handles reduce fatigue during use.
  • and the sturdy blow-molded case keeps everything organized and portable.
  • SATISFACTION GUARANTEED: Order this reliable hose clamp pliers set with your peace of mind assured thanks to its 1 year warranty and Orion Motor Tech's friendly 24/7 customer service.
Check Stock

LOKMAN 20 Pack Stainless Steel Hose Clamp Adjustable 3/8'' - 5/8'' (10-16mm) Worm Gear Hose Clamp, Metal Fuel Line Pipe Clamp for Plumbing, Automotive And Mechanical Application

  • HIGH QUALITY STAINLESS STEEL- The whole hose clamp (including the band, housing and screw) are all made of premium 304 stainless steel material. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable..
  • WIDE ADJUSTABLE SIZE RANGE- Clamps are flexible and ductile with wide adjustable size 3/8'' - 5/8''(10-16mm). Fit for hose outside diameter 10-16mm..
  • WIDELY USED- Clamps are widely used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor or outdoor..
  • ENVIRONMENTAL FRIENDLY- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
Check Stock