Reviews Steel Air Brake Hose

Mtsooning Motorcycle Brake Hydraulic Line, 60cm/23.6inch Braided Clutch Oil Pipe, Stainless Brake Hose Replacement for ATV Motorbike Pit Dirt Bike

  • Material: Braided stainless steel hose provides the durability and safety of the perfect motorcycle brake line, the banjo is made of steel with a rust-resistant coating..
  • Size:The diameter of the banjo is 10mm/0.39inch, and the banjo bends on both sides are 28°. The length of the brake hose is 60cm/23.6inch.
  • Features: PVC material wrapping and stainless steel braiding protection provide products with excellent aging resistance, corrosion resistance, high and low temperature resistance, and durable quality.
  • Application: This braided brake line motorcycle is suitable for most bicycle, enduro, motocross and other scenarios..
  • Precautions and after-sales service: Please confirm your line length before purchasing. If you have any quality problems after purchase, please contact us..
Check Stock

HaSaoMoi Air Brake Line Fitting, DOT Brass Push in Fitting, Push to Connect Union Fittings Air Brake Union 1/4" Tube OD for Trucks Trailers andIndustrial Use (4 Pack)

  • 【PREMIUM MATERIAL】：Our push in fittings are made of high quality CA360 brass,Certified by DOT and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4".
  • 【TYPICAL APPLICATION】：The air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, heater controls, industrial workshops, daily garden or lawn mower repair, towing machine hose connection and air brake connections ..
  • 【EASY TO BE INSTALLED】: Union connect two tube with same OD. All quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
  • 【MAX PRESSURE】: Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mutations).
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

YiaChuii 15ft 3 in 1 ABS & Power Air Line Hose with Glad Hands & Gladhand Handles for Tractor Trailer Semi Truck

  • 【SPECIFICATIONS】[TRUCK/TRAILER CABLE for ABS SAE J2394 - 4/12-2/10-1/8 -65°C/-85°F (Green)] - [AIR BRAKE SAE J1402 A DOT TYPE S 3/8 I.D. (Black)] - [SAE J560 for Plug].
  • 1 Pair Glad Hands & Glad Hand Extension Handles.
  • 【CROSS REFERENCE NUMBERS】3 in 1 Semi Truck Power Cable: 302171,30-2171,11-8115.
  • PE13050. Glad Hands: 035042 / 035045, 1011EF / 1011SF, 278850 / 278851, etc. Gladhand Grips: 12-600, etc..
  • 【7 WAY ELECTRICAL CABLE】Our power cord uses the industry standard zinc die-cast plug to efficiently transmit power from the engine to your trailer/truck. The real high-quality copper makes the cable have good thermal conductivity and electrical conductivity. The durable electrical cable ensures the normal use of lights such as turn signals and brake lights during driving..
  • 【ERGONOMIC RUBBER GRIP HANDLES】At the ends of the two 3/8" ID rubber air brake line hoses are two 1/2" swivel fittings and color-coded handles. The red - blue handles, large and easy-grip, are suitable for installing sladhands and for easily attaching/d....
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • PNEUMATIC BRAKE OIL BLEEDING TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
  • ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
  • BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent....
Check Stock

vbaxy Brake Bleeder Hose- One Way Check Valve Tube Bleeding Tool Kit for Motorcycle Clutch

  • 【Material】: Aluminum body to resist corrosion from brake fluid,using soft tube for easy releasing or loosen.
  • 【One Way Check Valve 】Prevents air being drawn into the system.
  • 【Easy to connect】：Simply and easy to connect with the clips to motorcycle clutch for bleeding..
  • 【Easy to bleed 】: Bleed motorcycle brakes fluid fastly with this brake bleeder hose..
  • 【Remark】:This motorcycle brake bleeder kit looks simple, but really a good helper to get the brake fluid out..
Check Stock

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • ...d hardware. *Rear brake kit includes .810" thick x 12.19" O.D. rotors with hats, Red Dynalite 4 piston calipers, drum parking brake assemblies with caliper mounting brackets, bearing retainers, BP-10 brake pads, and hardware..
  • *Front & Rear Flexline Kits with steel braided brake lines, caliper fittings, & chassis fittings to connect the calipers to the hard lines *Rear Hard Line Kit with steel hard brake line tubing to connect the chassis fittings to the included rubber hose, which connects those hard lines to the line on the frame *Rear Parking Brake Cable Kit, which connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission.
Check Stock

NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986

  • ...um Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Brake Pads 003e All Hardware To Install.
  • Parking Brake Cable Kit: 003e Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission | Flexline Kit: 003e Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines 003e Also includes weld-on line tabs | Hard Line Kit: 003e Steel hard brake line tubing to connect the chassis fittings to the included rubber hose 003e Rubber hose connects those hard lines to the line on the frame.
Check Stock

EilxMag DOT Brass Air Line Quick Connect Fittings, PBT Push-To-Connect-Fittings NPT Male Thread & Brass Air Brake Line Fittings Kit (Pack of 44)

  • ... The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The air hose kit fittings are suitable for PU / PA / PE / PVC. The air brake fittings assortment kit can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Quick disconnect simply push tubing in, no tools or loose parts to handle in tight places. Save your effort and time. And pieces that contain a threaded end already have sealant pre applied to provide a secure connection..
  • 【After Service】: If you are not satisfied with our Air Line Fittings Assortment, please feel free to contact us, as we will offer you a replacement or 100% money back. What we desire is to bring you the best shopping experience..
Check Stock