Reviews Standard Gear Pump

CS Unitec EBM 352/3 PSV -14 in. Capacity Concrete Core Drilling Rig with Vacuum/Anchor Stand- Wet Diamond Core Drill -3-Speed For Concrete, Brick, Asphalt, & Stone -MADE IN GERMANY (w/vacuum pump)

  • Heavy-duty, light-weight core drill rig with combination vacuum/anchor stand - can be used as either a vacuum or an anchor stand- 14 in. diameter hole capacity -MADE IN GERMANY (vacuum pump included).
  • Powerful 20 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (230/500/1030 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Only 77 lbs. (Rig & Motor) - Universal Tool Holder / Motor Slide Mount Allows for Easy Separate Mounting of Core Drill Vacuum/Anchor Stand from Drill Motor to Reduce User Fatique and Improve Hole Alignment (Motor Weight = 27.5lbs).
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
Check Stock

DNJ EK3165AM Master Engine Rebuild Kit for 1999-2001 / Chevrolet, GMC/Sierra 1500, Sierra 2500, Silverado 1500, Silverado 2500, Tahoe, Yukon, Yukon XL 1500/5.3L / OHV / 16V / LM4, LM7 / VIN T

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Freeze Plug Set (Brass), Cam Bearings, Timing Chain Kit, Oil Pump.
  • FITS: 99-01 Chevrolet, GMC / Silverado 1500, Suburban 1500, Tahoe, Sierra 1500, Yukon, Yukon XL 1500, Silverado 2500, Sierra 2500 5.3L V8 OHV Naturally Aspirated LM4.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, 1st Design, Positive Type Stem Seals, Master Kit, w/ 3 Bolt No Sensor Hub Cam Gear.
  • You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

GPI - L5132 High Viscosity Oil Pump, 32 QPM, 230AC/115V Oil Transfer Pump for Viscous Fluids That Features a 0.75” Ball Valve Nozzle, 8 Foot Hose, 3 Foot Power Cord with Three-Prong Plug (142100-02)

  • DURABLE ALUMINUM HOUSING: Our gear oil transfer pump is for high viscosity fluids and lubricants. Engineered with the lightweight cast aluminum housing and gerotor gear design, our oil extractor pump ensures long life and minimal maintenance. With the rugged 230/115-volt AC motor, our oil pump delivers a flow rate of 8 GPM or 32 QPM (30L/min)..
  • HEAVY-DUTY OIL PUMP: The L5132 is specially designed for use with new oil (up to 90 wt), waste oil, hydraulic fluid, antifreeze, or other non-flammable oil-based solvents. Our high viscosity pump is highly productive when used to pump drums, bulk tanks, waste oil reserves, and other oil containers. Modeled to fit easily to a barrel or drum, this oil extractor quickly transfers all incombustible liquids!.
  • EXTENDED MOTOR LIFE: The smart thermal protection design extends the motor life of our heavy-duty oil pump with the versatility to handle a variety of fluids without the risk of overheating. The weight centering inlet base of the pump reduces the tank stress and the pressure relief valve offers the easy strainer access..
  • EASY-TO-USE: Accompanied by a pre-installed 3 foot power cord with a three-prong grounded NEMA plug, this oil pump greatly reduces assembly and installation time. The pump includes an 8 foot long....
Check Stock

Sunsbell Solar Pond Pump, Air Pump, Solar Powered Pool Fish Tank Oxygenator Oxygen Aerator Air Pump Pond Kit, for Garden Fish Tank Pool Fishing Pond

  • ...mp can work for 20 hours when fully charged. Portable air compressor high oxygen content, high air volume up to 0.9l/min, Professional manufacturers provide after-sales service.
  • Applicable space scenarios: Fish tank bubbler is small in size and low in noise, There are high gear, mid gear, low gear with 10 seconds on and 10 seconds off 3 different working modes for you to switch by pressing the button which can meet the oxygenation of various aquariums, fish tanks, pools, and ponds.
  • Warranty Tip: Fish tank air pump When dead or replaced, you must restart the pump, either by 1) plugging in the USB to charge for 5 seconds or 2) placing it in direct sunlight for a few minutes.
  • Safety of use: imported single-chip intelligent control, support constant voltage and constant current charging, overcharge and discharge protection, easily adjust the best angle to absorb solar energy, The products have been certified by expert institutions. You can buy with confidence and use them with peace of mind.
Check Stock

Hangar 9 Ultra Fuel Pump (Manual Gas & Glow), HAN155

  • CNC Machined Electronic Fuel Pump for rc airplane.
  • Working Voltage:4.8-6V flowrate: 1000CC/minute Lift: 0.8M.
  • Full metal pump core, long service life Fully enclosed motor, High security.
  • Full Metal Shielding, anti-interference PU sealing element, pump can be used for both gasoline and nitro.
  • impurities may damage the pump gear, please assemeble a fuel filter..
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 1:1 Fast High Flow Rate 8.5GPM / 32LPM for SAE130 Oils/Fluids

  • ...gned, delivering fast and precise flow rates.
  • This Smart design uses fewer parts for less pump wear/tear, making it is easy to use/maintain This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE80 grade oil.
  • PROPER USE & SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall-mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper additional equipment as listed in the manual when installing pump and always wear protective glasses/goggles or gear when operating equipment.
Check Stock

mistcooling 160PSI Misting Pump (220 V-AC)

  • Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Check Stock

Du-Bro 911 Kwik Fill Fuel Pump

  • Reversible Gear Pump design. Works from 6V to 12V.
  • FILL-OFF-EMPTY 3 position switch and pre-installed alligator clips.
  • Length: 3-3/4" (95mm) Width: 1-3/8" (34mm) Height: 1" (25mm) Pump capacity 33 ounces per minute at 12V.
Check Stock

TOYAN FS-L400 14cc Inline Four-Cylinder Four-Stroke Water-Cooled Nitro Engine Model DIY Assembly Kit for 1:8 1:10 1:12 1:14 RC Model Car Ship Airplane - KIT Version

  • Integrated Crank Shaft: It utilizes a 180-degree crankshaft. The ignition timing sequence of 1342 for running smoother and more sensitive acceleration response. The maximum speed is 13,500 RPM..
  • Double Synchronous Pulley: The timing structure of the dual synchronous pulley reduces the risk of gear jumping during high-speed operation. / Precision Rocker Arm: Alloy rocker arm and independent intake and exhaust design for more accurate valve switch..
  • Built-in Mechanical Pump Water-Cooled Kit: The power of the pump body comes from the crankshaft, and the pump body provides circulating power to the coolant. Later, it can cooperate with the cooling fan to enhance the self-cooling performance / Precision Carburetor: Independent four carburetors for more accurate tuning, more sensitive throttle response, and working more stable.
  • High Precision Gear Pump: High-speed structure design & corrosion-resistant material manufacturing. Large flow water pump provides powerful cooling capacity. / Lightweight: It can be better compatible with the RC model and improve the unit power output ratio.
  • Starter Kit: The engine comes with an electric starter kit, providing users with all new fun..
Check Stock