Reviews Stainless Hose Clamp

Ripeng 200 Feet 40 Pieces Hoses Clamps, Worm Gear Clamps Stainless Steel Adjustable Duct Hose Large Clamp for Intercooler, Pipe, Plumbing, Tube and Fuel Line, 43 Inch

  • ...trim the hose clamp strap in length you want easily, then insert the fastener to make a suitable size you want, no more waste any materials.
  • You will get 2 piece adjustable hose clamp and 40 pieces fasteners, enough quantity to meet your different needs.
  • Suitable Size: the stainless steel duct clamp strap's total length is 100 feet, suitable to cut and get your long large hose clamp in different sizes, such as 12 inch, 14 inch, 16 inch and so on, the max size is 43 inch.
  • Reliable Material: the hose clamp and fasteners are made of quality 304 stainless steel, rust-proof, water proof, corrosion resistant, strong, and long lasting use, which can be applied in outdoor and coastal areas.
  • Wide Range of Uses: adopts the open structure of inner and outer ring and the bolt is fastened, the worm drive pipe clamp is torsion-resistant, pressure-resistant, tightly locked and with large adjustment range, provides sealing performance and helps to solve the problem of liquid gas leakage.
  • Convenient to Use: you just need to loosen or tighten the screw of the hose clip by a screwdriver to adjus....
Check Stock

ZIPCCI Hose Clamp 25 Pack Stainless Steel Worm Gear fuel line hose clamps 16-25mm 5/8-1 inch

  • Package includes: 25 pieces 3/4 inch hose clamps..
  • Hose clamp clamping range from 16 to 25mm (5/8 to 1 inch).
  • 304 Stainless steel hose clamp provides maximum corrosion resistance to salt and most chemicals..
  • Adjustable style hose clamp for a variety of applications for marine, auto, water pipes, fuel lines, etc...
  • Use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
Check Stock

5/16\ Heavy Duty Double Gripping Nylon Hose Clamps, 225° F / 200 PSI Rated, 10 Pack (Made in USA/UK)

  • Quality material: the entire hose clamp is made of quality 304 stainless steel, which is resistant to salt, rust, corrosion, water and oil.
  • Hose clamps with stainless steel material are firm and reliable, no need to worry about rusting and cracking when installed on pipes.
  • 10 Range sizes for options: these hose clamps are flexible and expandable with adjustable widths to fit 20 cm/ 7.87 inches hoses.
  • They include 10 steel hose clamps in different diameters to accommodate more hoses, and the fixture kit is flexible and easily extensible, with adjustable sizes ranging from 9 to 273 mm/ 0.35 to 10.75 inches.
  • Easy to install: the hose clamp is designed with a worm gear construction that adjusts its diameter to apply good sealing pressure.
  • It connects the hose so that the hose can be installed in a narrow space to prevent leakage.
  • These fixtures can also be applied for many times due to the 304 stainless steel material.
  • Wide application: the hose clamp could be firmly locked and applied to fasten hoses, pipes, cables, pipes, fuel lines, etc..
  • Suitable for many fields, like automotive, industrial, marine, shield, electronic or home applications.
  • Package includes: the hose clip kit comes with a total of 28 hose clips in a range of 10 sizes from 9 to 273 mm/ 0.3....
Check Stock

Stainless Steel Hose Clamp Kit - Heavy Duty Adjustable Worm Gear Clamps - Adjustable Band Clamps for Pipes Fuel Lines Radiator - Metal Strapping Tool in Automotive and Plumbing - Worm Drive Clamp

  • Hose clamps can be used to secure hoses, pipes, and fuel lines in automotive, home, garden, boat, radiator, and air conditioner applications. Hose clamps are available in a variety of sizes and designs to meet your needs..
  • This clamp will prevent pipe leakage and also can fit the hose perfectly and seal it without damaging it. This will keep the hose in good condition and allow it to function properly..
  • These stainless steel hose clamps are installed at the joints of the hose to prevent fluid leakage. The clamps are tightened so that they compress the hose, forming a seal. This seal keeps fluids from escaping..
  • The hose clamp is made of stainless steel for durability and resistance to corrosion. This makes it ideal for use in a wide range of industries, including automotive, marine, and plumbing..
  • The worm gear design of the hose clamp makes it easy to adjust the size of the clamp. The design is such that the worm gear can be tightened or loosened as needed, making it a versatile and convenient tool..
Check Stock

YuanTenhwy 3 PCS 3/8 10mm Brass Hose Barb Tee Fittings With 9 PCS Stainless Steel Clamps For Air/Water Hose Splicer 3-Way-T…

  • 【Size】: The outer diameter of Hose barb fitting is 3/8 inch (10mm).
  • 【Packing list】: 3 PCS of 3-way(Type T) Hose barbs fitting with 9 PCS of stainless steel hose clamp.
  • 【Material】: The hose barbs fitting is made of brass, and the hose clamp is made of stainless steel.
  • 【Features】: corrosion resistance, dimensions in line with standards, and overall smooth without burrs.
  • The solid barb and hose clamp ensure that the hose and the Hose barb fittings are well sealed during connection, and are not easy to leak.
  • 【Application Scenarios】：It is applicable to pipeline installation and maintenance, and is often used to assist in the transportation of gas, water or oil. However, federal laws do not allow the installation of these fittings for drinking water in the United States and its territories..
Check Stock

Aluminium Garden Hose Repair Connector with Stainless Steel Clamps, Male and Female Garden Hose Fittings, Mender End Repair Kit ，Water Hose End Mender，Fit for 3/4" Garden Hose Fitting, 2 Set

  • Garden Hose Repair Connector：2 sets female and male hose repair connector with clamp, 4 pcs Stainless steel clamp，4 extra Garden Hose Washer Rubbers.Fit for 3/4″ hose fittings.
  • Aluminium Garden Hose Mender End Repair Kit : Female and male hose repair connectors are made of high quality aluminum, he surface oxidized to copper-like color，the clamps are made of stainless steel.Heavy-duty Aluminum metal construction with rust proof,Please note our connector are made of Aluminum , not brass.Our product Completely lead-free.
  • Easy to use : Easy to connect and disconnect, use to repair and connect the water hose end.Easy to install these garden hose end replacement by hands, 4 pieces stainless steel tightening clamp with rust proof for you to use or replace, effectively avoid leakage, it’s good choice for your backup tool of hose mender..
  • Widely Application: These garden hose end replacement has a wide range of applications such as outdoor faucet, garden hose, hose splitter, filter, sprayer, sprinkler, nozzle, timer, etc. It will help you solve some problems about repair as long as the size matches.
  • An ideal hose repair part, you can easily place an order. If you have any questions, please feel free to contact us. We will help you solve the pro....
Check Stock

STEELSOFT Stainless Steel Band Clamp System Kit, DIY, Large Hose Clamp Worm Clamps Duct Clamp 2.5''-115'' Diameter, 30 FT Strap + 8 Fasteners, Air Ducting, Metal Strapping, Exhaust Wrap Clamps

  • Super Easy To Use: Please read the installation manual in the 2nd image! Only a snip or plier + a screwdriver needed. If there's no a snip, please use a plier to bend the strap up and down repeatedly, it will be cut easily also!.
  • Make Your Own Clamp: Nothing like the freedom to determine your own band clamp sizes and still have enough material left for other future projects. Please read our installation manual in the 2nd image, very easy to trim strap, insert fasteners and get a custom hose clamp!.
  • Cost Effective: DIY hose clamps will make it much more cost effective and flexible than ordering a variety of expensive hose clamps..
  • 304 Stainless Steel: 1/2'' x 30 feet band + 8 PCS adjustable fasteners are well made of 304 stainless steel, rust protection, weather resistant. They will not be rusty with age, last forever!.
  • Large Hose Clamp: Sometimes it is hard to look for a large stainless steel band clamp in your local stores. Now 30 feet band strap is available to create a clamp in flexible diameter options 12 inch 14 inch 16 inch 18 inch 20 inch 22 inch 24 inch 26 inch 28 inch 30 inch 40 inch ... and 115 inch max..
  • Separated fasteners can be purchased in this link if you have extra strap left..
Check Stock

ZIPCCI Hose Clamp, 2 Inch Stainless Steel Worm Gear fuel line clamps for Water Pipe, Automotive and Mechanical Application, 40-63mm (10 Pack)

  • Package includes: 10 pieces 2 inch hose clamps..
  • Hose clamp clamping range from 40 to 63 mm (1-5/8 to 2-1/2 inch).
  • 304 Stainless steel hose clamp provides maximum corrosion resistance to salt and most chemicals..
  • Adjustable style hose clamp for a variety of applications for marine, auto, water pipes, fuel lines, etc...
  • Use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
Check Stock

Hose Clamp Stainless Steel DIY 7.9 FT Metal Strapping with Holes + 6 Fasteners Large Adjustable Clamp Worm Gear Hose Clamps Pipe Clamp Band Clamp Air Ducting Clamp for Pipe Automotive Cable Tube

  • DIY Hose Clamp: You can trim the stainless strap at any length you want easily to adapt to different hoses, which can be used for pipe repairing in your house, garage, lawn, garden and so on..
  • Large Hose Clamp: The hose clamp kit comes with a 7.87 feet long × 0.5inch wide metal strap and 6 fasteners in total. It’s a simple matter to make large pipe clips, such as 12 inch, 14 inch, 16 inch and the max size is 29 inch.
  • Durable Stainless Steel: The hose clips are made of high quality 304 stainless steel material that are corrosion-resistant, water-proof, rust-proof. It is also fine to use outdoors and in coastal areas. Solid and sturdy material ensure the adjustable hose clamps last a long time for use, and can be reused..
  • Powerful Function: The worm drive clamp is torsion-resistant, pressure-resistant, tightly locked, helps to solve the problem of liquid gas leakage. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications..
  • Easy to Use: You just need to attach the fastener into the pipe strap like picture 5, and then loosen or tighten the screw of the hose clip with a screwdriver to adjust the size, attach the hose to the fitting tightly. Perfect to apply in automotive, industrial, boat/marine, shield, electronic....
Check Stock