Reviews Stainless Capillary Tubing

Mortairvent 202 6mm (200 sq. ft.)

95% open design creates a continuous capillary break and channel for moisture to drain, accelerating drying of the exterior cladding..
Simple and quick to install. Easier and more cost effective than traditional furring strip methods..

1500 PSI Misting Pump with Stainless Steel Tubing, Stainless Steel Nozzles. Do it Yourself Misting System, easy to Install , comes with all parts. For Residential. Commercial and Industrial Misting Applications.
Base 10 Nozzle Mist Kit Includes: 1 - 1500 psi High pressure pump with built-in water on/off valve, low water cut off switch, pressure bypass, commercial 5 micron filtration, Outdoor Rust Proof Enclosure with on/off Switch 18ft Stainless Steel tubing for push lock (Pre-cut 2ft sections), 22ft UV coated Flexible 1/4" feed line, 10- Nickel Plated Push Lock Misting Tees, 10- Stainless Steel Orifice Misting Nozzles (0.006"), 2- Nozzle plugs, 1 - Push Lock End Plug.
1500 PSI Pump Features :Inbuilt Filtration, Direct Drive, With Solenoid, Pressure Switch, No Water Cut off Switch, With By-Pass Valve, 50-60 DB, TEFC Motor , 110 V AC.
Easy to Customize, Easy to Install, Do it Yourself Misting, With Push Lok Fittings for Ease of Re-Use.
2 Ft Stainless Steel Tubing Pieces with Grooves makes it easy to use the System for Industrial Applications..

Nut tightens and provides compression on the ferrule of a flareless fitting.
Chemically hardened type 316 stainless steel for higher strength and greater corrosion resistance than untreated stainless steel.
For use with a twin ferrule compression fitting set for a leak-resistant seal in high-pressure applications.

STAINLESS STEEL: The 304 stainless steel compression tube fitting double ferrule construction for durability and resistance to corrosion..
SCOPE OF APPLICATION: The stainless steel compression tube fitting double ferrule has dual couplings for joining two tubes of the same diameter..
LESS LEAKAGE: This stainless steel compression tube fitting has a double ferrule construction, reducing the possibility of leakage..
SIMPLE OPERATION: Back ferrules hold tubing tight within the body of the fitting while front ferrules hold tubing tight through the nut..
APPLICABLE MEDIUM: This stainless steel compression tube fitting double ferrule is applied to oil, water, gas and other non-corrosive or corrosive medium..

Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.

Simply insert the end of the tubing between the dies and start cranking the turning handle.This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing..
Aluminum, steel or stainless steel Intercooler pipe Fits 5/8″ and larger tubing..
Aluminum pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 3mm.
Steel pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 1mm.
By turning the handle on the side of the tubing beader tool, you can form a desired bead on the end of aluminium or copper tubing..
Works best when secured in a vice.Please Note: Always apply the bead before welding..

37˚ DOUBLE FLARING ADAPTERS in 3/16”, 1/4”, 5/16”, 3/8”, 1/2” sizes.
37˚ DOUBLE FLARE DIE SETS in 3/16”, 1/4”, 5/16”, 3/8”, 1/2” sizes.
37˚ CONE constructed of high quality machined steel.
CREATE PERFECT PRODUCTION QUALITY FLARES on annealed stainless steel tubing, terne plate steel tubing, soft aluminum and soft copper tubing.
PRIMARY USES INCLUDE racing, restoration, hot rods, aviation.

[Length] The tow harness for boat has total length of 24 FT which is suitable for 20-24 ft width boat..
[Floating] This boat tow rope for tubing has foam float equipped to keep floating. The foam sleeve has length of 20cm(7.8 inch/0.65ft)..
[Material] The boat tow rope for tubing is made of 16-strand PE rope +316 stainless steel pully and clip +quick connector..
[Quick Connect] It is easy to attach tube rope with the heavy duty quick connector and connect to boat with 2 stainless steel clips..
[Breaking Strength] Our boat tubing rope has diameter of 2/5 inch and breaking strength 1500lbs pounds to support 1-2 rider towable tubes..
[Wide Applications] This self centering tow harness with float for boat is a great water sports line and equipment for boat tubing, water skiing, jet skiing,wakeboarding, kneeboarding and wakesurfing..

STRONG COSTRUCTION: This piece of equipment is constructed of stainless steel for added durability and corrosion resistance. Overall, it measures 63 inches wide by 15.5 inches deep by 11 inches high. Includes stainless cover for refrigerated area..
REFRIGERANT: A self-contained capillary tube refrigeration system uses R290 refrigerant, providing reliable and even cooling throughout the unit. All Arctic Air commercial prep tables are tested to NSF 7 levels and must pass numerous quality control inspections throughout the manufacturing process..
CONDIMENT STORAGE CAPACITY: A total of (14) 1/6 size stainless steel food pans are included, in addition to matching covers and pan support bars. Perfect for storing items such as sliced tomatoes, pickles, relish, onions, and more..
TEMPERATURE: This unit has an integrated electronic thermostat that allows you to set the temperature between 33 and 41 degrees Fahrenheit, while its external digital LED panel displays the exact temperature for easy monitoring..
EASY TO OPERATE: Operators can turn the unit on and off with its backlit switch, which is located at the front for optimal accessibility. Stainless steel supports are included. The unit requires a 115V electrical connection..