Reviews Stage Pressure Control Valve

OTC 2510A Stinger 10,000 PSI Foot Operated Air/Hydraulic Pump for Rams, Presses, & Hydraulic Pullers, CHROME

  • Ideal all-around power source for dozens of body, frame, and alignment applications develops 10,000 PSI of hydraulic pressure at 100 PSI air pressure.
  • Pump, hold, or release load using simple pedal control - great unit for use with a wide variety of rams, presses, and hydraulic pullers operating at up to 10,000 PSI.
  • Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure.
  • Convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock.1/4 inch NPT Air Inlet.
  • Features a 98 cubic inch useable capacity and 3/8 NPT oil port.
  • unit requires 9 cfm of air at 100 PSI (at the pump).
Check Stock

Goodman 80 000 BTU 80% AFUE Upflow/Horizontal Gas Furnace model GMH80803BN

  • Two stage gas valve control technology enables the installer to activate the 2 stage valve with the flip of a dip switch.
  • Control board has the provision to store the last 5 diagnostic codes in memory.
  • Low Voltage terminals and extra provisions for the 24 volt humidifiers and air cleaners.
  • Using self adjusting features, the furnace gets adjusted automatically to a high- or- low stage operation based on the temperature outside without any outdoor temperature sensor.
  • Low Constant fan enables the users to activate the low heat speed to ensure efficient circulation of air throughout the home.
Check Stock

6.0 POWERSTROKE KC STAGE 2 TURBO (04-07)

  • ◭ [Vehicle Application] : Injector Pressure Regulator Valve with Socket 6.0L Powerstroke Diesel Engines Fits for Ford 6.0L V8 Diesel Turbocharged Vehicles - for 2004-2010 Ford E-350 E-450, for 2003-2010 Ford Excursion, for 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty..
  • ◭ [Manufacturer Part Number] : Direct replace factory part AP63417 1846057C1 5C3Z9C968CA 5C34-9C968-CA W3250216 CM5126 and HTV102 for a proper fit, Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035.
  • ◭ [Function] : Precisely manufactured internal valves high quality diaphragms and springs to perform excellently under all engine operating conditions. Replaces Injector Pressure Regulator Valve and regulates the oil bypass circuit of the high pressure oil pump, that opens and closes to allow high pressure oil into the injectors.This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus properly control the pressure in the high-pressure oil system..
  • ◭ [Material and Installation] : IPR Injector Pressure Regulator Valve, contructed of premium material for long lasting durability and reliability. Robu....
Check Stock

MENSI Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit

  • Low Working Pressure Max 1/2 PSI（65mbar）, CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread.
  • Length of Thermocoupler 600mm Head Tip M8*1 (This is Low pressure control valve max rating BTU 50000).
  • Platic Black Bakelite Knob Diameter 38mm and "D" Insert for Valve 6.0-6.1mm.
  • Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater (max BTU rating: 50000 working pressure 65mbar).
  • Keep The Thermocoupler to be Heated and Push the Valve around 5-10s Then Release Hand (if Flame stops, Ajust the location of Thermocouple tip).
Check Stock

EXCELFU Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit Suitable for Gas Grill Fire Pit Fireplace & Heater

  • CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread, Low Working Pressure Max 1/2 PSI (65mbar).
  • Material: The fire pit gas control valve kit are made of high quality brass material with heavy-duty construction for durable use.
  • Length of Thermocoupler: 600mm, Head Tip: M8*1 (This is Low pressure control valve max rating BTU 50000).
  • Platic Black Bakelite Knob Diameter: 38mm, "D" Insert for Valve: 6.0-6.1mm.
  • Appliction: Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater (max BTU rating: 50000 working pressure 65mbar).
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • ✅【PERFECT COMPATIBILITY】 : The scuba tank’s inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • ✅【HIGHT QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
  • ✅【PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED 】:Our m....
Check Stock

Dual-Head Pneumatic Jewelry Engraver Machine 110V 60Hz Pneumatic Hand Engraving Machines 400-8000 RPM Pneumatic Graver Handpiece Micro Engraer for Jewelry Crafts and Wrought Iron

  • 【Technical Parameter】Product type: Dual-head jewelry pneumatic engraving machine. Model: HH-G01, power supply: 110V 60HZ, adjustable speed: 400-8000 RPM, flexible pressure range: 0-4 KG..
  • 【Precise & Adjustable Gauge】The pneumatic engraver features 400-8000 strokes per minute, a throttle bias adjustment valve for tailoring throttle response.
  • 【Ergonomic Design】Advanced ergonomic designs are adopted as the front air pressure adjustment, quick connection air connector, and advanced valve pulse device, without noise or vibration..
  • 【Easy-to-operate Panel】Adopting user-friendly keyboard design & reasonable layout, easy to operate, intuitive & clear. The foot pedal is convenient for precise control..
  • 【Various Application】Pneumatic hand engraving machines are suitable for jewelry, crafts, wrought iron & other industries and can be regarded as a good helper for engravers..
Check Stock

Moen UTS2611 Doux Collection M-CORE 3-Series 2-Handle Shower Trim with Integrated Transfer, Valve Required, Chrome

  • VERSATILE DESIGN: Chrome finish is highly reflective for a mirror-like look that works with any decorating style.
  • VALVE REQUIRED: This trim kit requires M-CORE Mixing Valve with Integrated Transfer Valve U232 or U362, with preferred installation option, to complete installation.
  • FOR USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
Check Stock

Portable Scuba Tanks,2.3L Scuba Diving Gear,DOT Certified Tanks，Underwater 30-45 Minutes Diving Tank,Bacup Air Tanks

  • ★【2.3LDiving Tank Package】The D23-A incorporates improvements to the diving package, including bottle head first stage valves and pressure gauges, as well as pressure tubes,and added some configurations to enhance the diving experience.The total weight of D23-A diving package is 4.6kg. It can be carried directly for short distances, and can be transported in the car if traveling..
  • ★【Bottle top valve】: The main material of D23-A bottle top valve is brass chrome plating, using vacuum color plating process, to improve the anti-seawater corrosion performance, and more beautiful appearance. The bottle valve has a low pressure interface, which can be connected to BCD or life jacket for better applicability. The air inlet adopts high precision filter core, which can filter particles over 5 microns. The scuba tank is stamped with the DOT certification mark, you can always check..
  • ★【Pressure gauge and pressure tube】: D23-A scuba tank uses A more stable pressure tube, which is made of PVC and butadiol mixture material. It can bear A maximum pressure of 10MPa, and the internal pressure is only 0.8-1.2mpa in normal use. In order to make it easier to check the remaining air in the tank during the dive, we use an extended tube connection pressure g....
Check Stock