OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts
- Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
- Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
- When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
- Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
- Used for slotting and peripheral milling.
Check StockNiagara Cutter - SP205-0.500-D2-S.3-Z2 17011645 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 3' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter
- 2 Flute design makes these ideal for plunge cutting when chip removal is not a problem.
- General purpose end mill for working on all types of materials.
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
- Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
- Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, pocket and slotting.
Check Stock
CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)
- DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
- Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
- High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
- Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
- Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check StockYG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
- Four flutes produce a better finish than fewer flutes.
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check StockYG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
- Four flutes produce a better finish than fewer flutes.
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check StockYG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
- Four flutes produce a better finish than fewer flutes.
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check StockNelson Wood Shims 8\ 12 Pack - Kiln Dried Wood - Set of 2 (Total 24 Shims)
- Suitable Square Turning Blanks with 3 x 3 x 12 Inches Dimension..
- Ideal Turning Blank for Lathe to Build Decorative Pepper Mills.
- 100% Product Satisfaction Guaranteed or Return the Product in 60 Days at No Cost.
Check StockSpeTool CNC Router Bits Carving 8 Pcs Set for Wood Detail Profile V Groove Engraving Solid Carbide 1/4 Inch Shank
- The Carving bits kits of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
- For CNC,Engraving machine.Carving Wood, plywood, MDF, plastics, acrylic, stainless steel, titanium alloy etc.
- Long service life, Decreasing the times of changing cutters,Saving production time.
- Include 3*carbide end mills ( 2 pc v-groove end mill, 1pcs tapered end mill ), 4*Spiral End Mill (3 pc up cut, 1 pc down cut), 1*ball end mill.
- The Carbide End Mill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
Check StockSHARS 1/4 X 1/2\ Cobalt Corner-Rounding END Mill 404-5851 P{
- H.S.S. Corner Rounding End Mill Set Size from 1/16'' to 3/8'', 8 Pcs, 1011-0008.
- 1/2'', H.S.S. Corner Rounding End Mills, 3/4'', Shank Dia, 1-1/2'' Cutter Dia, 3-7/8'' Overall Length, 1011-1234.
Check Stock 
