Reviews Sqp Cement Resistors

1 qt Dap 31084 Bondex Ready-Mix Concrete Patch

• Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
• Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add pigment powder as follows: 1. Calculate the amount of pigment powder to be added according to the pigment powder: cement = 1:25.
• 3. Pour the pigment powder into the cement. 4. Evenly mix cement and pigment powder. 5. Mix cement and pigment powder with mortar..
• Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
• White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
• Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
• The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
• If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. T....

Bon 32-500 1 Pound Bag 3/4-Inch Anti-Crak Concrete Fibers (4, 3/4-Inch)

• Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
• Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
• 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
• Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
• White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
• Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
• The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
• If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. Thanks ).

HUAREW 25 Values Single Resistor Kit with 1000 Pcs 1 Ohm-1M Ohm 1/4 W 5% Carbon Film Resistors Assortment Kit for DIY Projects and Experiments

• ▲resistor assortment kit contains 1000 Pcs resistors with variety values,each value of 40 pieces..
• ▲ These resistor kits including 25 different values: 1Ω, 2.2Ω,3.3Ω, 10Ω, 22Ω, 47Ω, 68Ω, 100Ω, 120Ω, 150Ω, 220Ω, 330Ω, 470Ω, 560Ω,680Ω,1KΩ, 2KΩ, 2.2KΩ, 4.7KΩ, 5.6KΩ, 10KΩ, 22KΩ, 47KΩ, 100KΩ, 1MΩ, to fulfill your variety requirement.
• ▲Premium Assorted Resistors: High quality assorted 1/4W watt-metal film resistors with 5% tolerance.
• ▲Easy to use: every value was labled and packed individually, there are color code guidance help you read the right resistance..
• ▲Scope:Suitable for various electronic DIY projects and electrical experiments. And can be used in most household appliances, communications and instruments..

-35º [Explicit]

• 2PCS 50W 6ohm Load Resistors + 4PCS Quick wire Clip..
• Prevent LED Turn Signal Lights or License Plate Brake Lights from hyper flashing, malfunction or trigger warning message on dashboard..
• NOTICE! Load Resistors heat up like light bulbs and get super HOT when working. Make sure you mount them away from any wires or plastic..
• One resistor is required for each turn signal bulb or each license plate light bulb..
• Easy installation. Just connect the wires with the splice taps provided and no wire cutting is necessary..

HUAREW 25 Values Single Resistor Kit with 1000 Pcs 1 Ohm-1M Ohm 1/2 W 1% Metal Film Resistors Assortment Kit for DIY Projects and Experiments

• ▲resistor assortment kit contains 1000 Pcs resistors with variety values,each value of 40 pieces..
• ▲ These resistor kits including 25 different values: 1Ω, 2.2Ω,3.3Ω, 4.7Ω, 10Ω, 22Ω, 47Ω, 68Ω, 100Ω, 120Ω, 150Ω, 220Ω, 330Ω, 470Ω, 1KΩ, 2KΩ, 2.2KΩ, 4.7KΩ, 5.6KΩ, 7.5KΩ, 10KΩ, 22KΩ, 47KΩ, 100KΩ, 1MΩ, to fulfill your variety requirement.
• ▲Premium Assorted Resistors: High quality assorted 1/2W watt-metal film resistors with 1% tolerance.
• ▲Easy to use: every value was labled and packed individually, there are color code guidance help you read the right resistance.
• ▲Scope:Suitable for various electronic DIY projects and electrical experiments. And can be used in most household appliances, communications and instruments..

5 X 6 FIBER CEMENT BLADE CARDED

Aexit 5W 500V Fixed Resistors 75K ohm 5% Metal Oxide Film Resistors Single Resistors 50 Pcs

• Each Size (Approx.) : 8.3 x 0.8cm/ 3.2" x 0.3" (L*D).
• Package Content : 50(±2%) x Metal Film Resistors.

ELEGOO 17 Values 1% Resistor Kit Assortment, 0 Ohm-1M Ohm (Pack of 525) RoHS Compliant

• More humanized design with 50 pcs frequently used resistors (100, 220, 1k, 10k Ohm) and 25 pcs seldom used resistors. Color Code Guide helps you read the resistance.
• Perfect pin (0.022 inches, 0.55mm), #24 lead SWG (Stand Wire Gauge), perfect for breadboard in electronic projects.
• Perfect packaging: Plastic case + PE bag.

GOODTAKE Orange Pigment Cement Pastel Tile Paint Color Pigment DIY Manually Paving Concrete Mold Concrete Color Pigment Dye for Cement Mortar Grout (Orange, 8 oz)

• Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
• Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
• 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
• Attention method: Ordinary gray cement: 1 pack of 50 kg gray cement, add 2 to 3 kg of pigment, and add 100 kg of sand. White cement: 1 pack of 50 kg white cement, 1.5-2 kg paint and 100 kg sand..
• Make sure to mix the paint and cement dry powder first, then add water and stir!.