Reviews Spot Reduction Laser

Braun Silk-épil 9 9/980 SkinSpa SensoSmart Epilator

  • ...heet, start cooling mode at power on, can cool the skin while emitting pulsed light with a painless ice-cool and comfortable experience..
  • 3-IN-1 FUNCTIONS (HR/RA/SC) & 9 ENERGY LEVELS - Start from 1 st level and adjust it. After 3-4 treatments, a visible effect of hair reduction and hair grows slowly, mostly up to 94% of hair reduction after 7- 8 treatments. The higher the level, the greater the intensity, and the better the effect.
  • Meanwhile, the upgraded hair removal device added 3 functions: HR/SC/RA to let you achieve the effect of skin care at the same time as hair removal..
  • PERMANENT HAIR REMOVAL, SAFE, GENTLE - AMOTAOS IPL Laser Hair removal is the effect of using IPL to damage the hair follicle to achieve permanent hair removal. The most efficient Intense Pulsed Light (IPL) device for permanent hair reduction in just 8 weeks..
  • AUTO/MANUAL MODES & FULL BODY USE - The IPL hair remover features Auto Mode (continuous flash) for bikini lines, upper lip, chin, face, and armpits, and Manual Mode (single flash) for the back, chest, stomach, arms, and legs. NOT suitable for eyebrows..
Check Stock

Fosmon, Wider Angle Upgrade, Dual Laser Garage Parking Assist Guide System, 360-degree Adjustable Parking Sensor with AC Adapter and Battery Backup for Car/Automotive

  • [New Wider Angle Upgrade] This updated product from Fosmon is perfect for a one or two car garage. The angle of the two lasers is widened up to 75 degrees, which can safely and efficiently assist two cars..
  • [Park Correctly and Easily Every Time] Do you have trouble about parking in a garage? Are you often too close to the side, too far forward, or too far back? Fosmon's dual laser parking assistant will allow you to park in the correct spot every time. With its simple installation and setup, the garage parking aid will be ready to use in minutes. No more busted bumpers and doors..
  • [Motion Activated Laser] The motion activated lasers have a detection range of 33 feet/10 meters, and will shut off after 30 seconds without motion..
  • [Provides Individual Laser Control] The garage parking aid allows for individual laser control for use with one parking stall or two. Simply toggle the button located on the side of the unit to switch between one or two lasers. The lasers have a 360-degree adjustment, ensuring that no matter the vehicle or parking spot size, the laser will be able to hit the mark each and every time..
  • [Battery Backup and Motion Activated] Even if the power goes out, the dual laser garage parking aid can use a 9v powered battery backup. NOTE: ....
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine, 5.5-7.5W Laser Power, DIY Engraver Tool for Metal/Glass Etching Kit/Wood Carving, Engraving

  • 【Create Your Own Logo】This 50W laser engraver for home can meet your daily needs. It can engrave on wood, bamboo, paper, plastic, leather, PCB board, aluminum oxide, non-reflective plating and lacquered metal, ceramics. You can engrave your own logo for your favorite items.
  • 【Newly upgraded compressed spot laser shaping technology】 LATITOOL F50 adopts the latest 5W laser beam shaping technology diode laser, with an ultra-fine laser focus of 0.08mm, the minimum engraving accuracy is 0.01mm，with super cutting penetration and precision, and the engraving & cutting speed is faster than ordinary compressed light spot is increased by 60%, it can cut 12mm thick wood, 8mm acrylic, engraved ceramic and stainless steel, which can meet your engraving.
  • 【Sturdy Structure&Easy Installation】 LATITOOL F50 laser engraver adopts an all-metal structural frame, which makes the machine more stable and durable, and improves the engraving accuracy. F50 entire engraving machine adopts a modular design, which is easy to assemble, repair and update machine parts. 60% pre-installed delivery, you only need 4 simple steps to install successfully, it only takes 10-15 minutes to complete the installation of the entire device.
  • 【180° Panoramic Visible】 UV filter-retar....
Check Stock

SCULPFUN S9 Laser Engraver, 90W Effect High Precision CNC Laser Engraving Cutting Machine, High Energy Laser Cutter for 15mm Wood, 0.06mm Ultra-Fine Fixed-Focus Compressed Spot, Expandable Area

  • High Energy Cutting & Ultra-Fine Laser Beam – S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06*0.06mm sharp compressed laser focus spot and 0.01mm engraving accuracy. With super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm acrylic, 10mm plywood, engraving ceramics and stainless steel..
  • Safety Protection Design – Laser filter cover can filter 98% of UV light to protect your eyes, no need to wear goggles to watch laser engraving and prevent pets from catching the laser spot. Equipped with a power switch to easily turn on, or turn off the machine in case of emergency. A4 size steel pad protects the table from laser damage and isolates fire hazards..
  • Extensive Compatibility & Uses – Compatible various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Apple system (LightBurn), and engraving file format support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc. Engraving materials: wood, paper, cardboard, plastic, PCB board, aluminum oxide, stainless steel, ceramic, stone, etc. Cutting material: wood, acrylic, plywood, fabric, bamboo, plastic board, etc..
  • Expandable Engraving Area & Quality Assura....
Check Stock

LaserPecker 3(Basic) Laser Engraving Machine, Fiber Laser Engraver 1064nm Cold Red Light 0.01mm Compressed Spot, 48000mm/min High Speed Handheld Fiber Laser Marking Machine for Metal Jewelry Plastic

  • Fiber Laser Engraver for Metal and Plastic: LaserPecker 3 laser engraver with 1064nm fiber laser for metal and plastic materials. e.g: stainless steel, gold, silver, aluminum, titanium, copper, coated metal plate.
  • acrylic, plastic, etc. Can be directly engraved without any preprocessing..
  • Much Smaller Compression Spot: LaserPecker 3 laser engraving machine adopts a 0.01mm*0.01mm ultra-fine compression spot, achieving detailed and vivid engraving images. Present pixels with 4K level perfectly..
  • Ultra Fast Engraving: LaserPecker 3 fiber laser marking machine with innovative galvo technology achieves high-speed engraving at 48000mm/min. Comparable Industrial-grade engraving speed brings a subversive experience..
  • Easy To Focus, Quick To Start: LaserPecker 3 laser engraving machine adopts dual infrared light positioning design (When the two red light spots are coincident, the focus is correct), which can accurately locate the marking position without offset and good position.
  • Quickly and accurately control the lifting of electric stand, can be realised easy focus on objects of different heights..
  • Versatile Base, Create With Easy: With the help ot the positioning plate on the base, the position of the engraving objects can be fixed/adjusted, making batch engra....
Check Stock

ATOMSTACK A5 Pro Plus Higher Accuracy Laser Engraver, 5-6W Laser Cutter, 40W Laser Engraving Cutting Machine Laser Cutter Compressed Spot CNC Carving DIY for Wood, Acrylic, Metal, 15.8''x16.2'

  • 【DOUBLE COMPRESSION TECHNOLOGY】 The upgraded 40W laser engraving machine adopts double spot compression and quadruple lens condensing, which makes the light source more concentrated than other engraving machines, and the compressed spot range is 0.08mm and 0.06mm. The powerful light source makes the engraving ability stronger, and can easily cut 15mm light wood and 12mm acrylic board..
  • 【NEW EYE PROTECTION FUNCTION】 The laser eye shield can effectively filter 97% of UV rays, effectively protecting your eyes at all times. The included protective goggles, you do not need to buy extra, reduce the cost of your goggles, and at the same time can strengthen the eye protection, so that you can watch the working process of the engraving machine at any time..
  • 【EXCLUSIVE AIR-GATHERING HOOD DESIGN】 The upgraded laser module adds an exclusive air-gathering hood design, which can effectively prevent smoke from adhering to and destroying the lens of the laser, and the guaranteed life is 3-5 times longer than other engraving machines..
  • 【EXTENSIVE COMPATIBILITY】 Atomstack upgraded 40W laser machine is compatible with a variety of mature engraving software, such as LaserGRBL, LightBurn (paid), supports Win XP / Win 7 / Win 8 / XP / Win 10, also supports MA....
Check Stock

LaserPecker 2(Basic) Laser Engraver + Magnet Protective Shields, High Precision 0.05mm Compressed Spot, 36000mm/min High Speed Portable Engraving Machine

  • : You can get 1 * LaserPecker 2 Laser Engraver (Basic) + 4 * LaserPecker Magnet Protective Shields by purchasing this Bundle..
  • : When you are engraving objects that are too large to use the cover that come with our machine, you can use our Magnet Protective Shields instead of it. Just remove the cover, put protective shields around the machine that protects your eyes from laser damage..
  • : The compressed spot of LP2 engraving machine is as tiny as 0.05 * 0.05mm, smaller laser spot and double lens focus create more details to make your artworks more lifelike. 3 resolution options 1k/1.3k/ 2k provide perfect details level..
  • : Same productivity, why not choose to take up less space? LaserPecker LP2 laser cutter, small size, light weight, convenient to take on-the-go. The original handle design supports hand-held engraving, and is not limited by the engraving space..
  • : Visualization design dark orange shields, you can clearly see the engraving process through the protective shields. Magnetic edges connect each piece together, you can set it up in 1 second, super convenient for work..
Check Stock

Firefield Hog Designator with Green Laser

  • Can be used as laser Designator or laser illuminator.
  • Turns traditional RifleScope into night vision RifleScope (illuminator mode).
Check Stock

Extech 42512 Dual Laser Infrared Thermometer, 1000 Degrees Celsius

  • Item is a Class II laser product, 1mW power output..
  • Fast response 30:1 infrared thermometer with backlit dual LCD display.
  • Dual laser for accurate targeting with fast (0.15s) response time.
  • At 30-Inch (76.2cm) distance two laser points converge to 1-Inch target spot.
  • Temperature range:-58 to 1832-Degrees F (-50 to 1000-Degrees C).
Check Stock