Reviews Spoilboard Surfacing Bit

FoxAlien x WoodMads WM-3020 CNC Router for Metal Caving, 300W Spindle Linear Rails and Ball Screws 3-axis Milling Engraving Machine for Aluminum Copper Wood Acrylic

  • [Outstanding Precision and Accuracy] The WM-3020 CNC machine is equipped with HG-15 linear bearings and 12mm balls crews on all 3 axes. These industrial components enable the carving to be faster, quieter, and more stable and precisely..
  • [Multiple Spindle Options] WM-3020 comes with a 300watt spindle, which is capable to engrave and cut wood, acrylic, carbon fiber, aluminum and brass. The z-axis is compatible with 65mm and 69mm spindle clamp, which means it is compatible with the trimmer routers such as DWP611, RT0701C, engraving module, and 1.5kw spindle..
  • [Aluminum Spoilboard with Scale] One-piece aluminum spoilboard enhances the flatness and strength. The scale is convenient for measurement and positioning. It is compatible with most of the hold-down clamps in the market..
  • [Grbl Open-source Based] The control board uses a 32-bit chip and is based on Grbl. It supports to set homing origin to any corner by editing the Grbl configurations..
  • [Main parts pre-assembled] Main parts are pre-assembled. It just takes 30-45 minutes to fully assemble the machine. It is made of all aluminum, which is sturdier and more stable. All necessary accessories for trial run are included in the package..
Check Stock

SpeTool 1/2\ CNC Spoilboard Surfacing Router Bits 4 Flutes 2\ Cutting Diameter Flattening Planing Bit Wood Milling Cutter Planer Woodworking Tool

  • This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
  • Precise, smooth, no burr edges - Tungsten steel tipped cutters are sharp enough, to slice smoothly into stock producing clean, splinter free..
  • Suitable for woods, mdf, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials.
  • Suitable for woodworking engraving machine, trimming machine and more, using for hand making a drawer or other woodworking.
Check Stock

Genmitsu 4 Pack Hold Down Clamp Kit, CNC Router Clamp for Woodworking and Metalworking, 3-7/20''L x 4/5'' W x 2-7/10''H, Compatible with CNC Router Machine PROVerXL 4030 &3040 Extension Spoilboard

  • Feature: This clamp can be used on a T-Slot Aluminum Spoilboard, and also can be used on Threaded MDF Spoilboard with pre-installed threaded holes (4mm (0.16'')) . Compatible with Genmitsu PROVerXL 4030 CNC router kit, 3040 Extension Spoilboard, as well as other large CNC machines. Just make sure the size of T-Slots/ holes on your Spoilboard can be compatible with this clamp..
  • Dimensions: This clamp is 85mm length x 20mm width x 68mm height. (3-7/20''L x 4/5'' W x 2-7/10''H)..
  • Working range: This clamp accommodates material up to 35mm (1.38'') thick and holds it firmly in position. It can hold a variety of materials for desktop CNC router machines..
  • Sturdy Quality: Constructed of High Strength Cold Rolled Sheet for durability and wear resistance..
  • Versatility: This clamp provides exceptional clamping forces for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more..
Check Stock

SpeTool 1/4' Shank 1' Cutting Diameter Spoilboard Surfacing Router Bit Insert Carbide Slab Flattening Router Bit 2-Wing Planing Bit Wood Bottom Cleaning Planer Bit

  • This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking.
  • Carbide Inserts 10*10*2.2mm,the inserts will be available on asin "B09CPDVBSG".
  • Contains two cutting flutes and two up-shear scorers, which provide a smoother finish at the bottom of the cut than traditional two-knife style router bits.
  • MDF, LDF, fiberboard, plastic, plywood, hardwood, softwood, etc.
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

Genmitsu CNC Machine 4040-PRO for Wood Acrylic MDF Nylon Carving Cutting, GRBL Control, 3 Axis CNC Router Machine, Working Area 400 x 400 x 78mm (15.7” x 15.7” x 3.1”)

  • ...ent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a dedicated 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port..
  • All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don’t need to replace the whole spoilboard when a panel gets damaged..
  • The extra spindle mount, laser module and other upgraded accessories are available for order. You could upgrade the machine easily based on your needs. If you get stuck, check out the SainSmart Resource Center (see at User Guide) or contact us with any questions that arise..
Check Stock

KOWOOD 1/2” Inch Shank 2” (Dia.) Bottom Cleaning Router Bit (Mortising Bit, Spoil Board Surfacing, Slab Flattening Woodworking Milling Cutter) with Carbide Tipped

  • ✔ 2” Inch Diameter and 11/16‘’ Inch Depth with 1/2” shank High performance Bottom Cleaning Router Bit.
  • ✔ High-grade carbide maximum strength and durable. Shank is to manufacturing precision measurement with a quality check to minimum tolerance and vibration during spinning.
  • ✔ Problem-free Router bit, it is suitable for all range’s router such as handheld router and table router.
  • ✔ Reliable Router bit for DIYer and 100% satisfy to experienced woodsmith. Specify for flat surfacing in the wood work project for any art or craft.
  • ✔ Kindly reminder for our customer checks the shank size for your router takes to avoid ordering in mistake. All dimensions and weight are in description below.
Check Stock

Woodhaven 3004 51\ Planing Sled

  • Our Planing Sled is an affordable solution for surfacing or milling live edge slabs, wide stock, butcher blocks or workbenches, removing a finish from a surface and other jobs impossible for a planer. Router & Bit NOT included..
  • 51" wide maximum capacity, 60" Ultra Track rails & 32" Double Track rails.
  • 3" tall Ultra Track aluminum rails support the router and won't deflect as you move the router back and forth over the stock. Router glides between the Ultra Track rails for front-to-back movement. You supply two wood rails, 12" to 16" longer than the work. No limit to the length of the work. Double Tracks glide on top of the wood rails and guide the router/Ultra Tracks from side-to-side..
  • Includes a NoDrill Plate with a quick attach feature so your router can be quickly attached or removed. Works with any router bit you supply that has an overall length of at least 2-1/2" and a maximum diameter of 2-1/2". Our optional 13600 upshear router bit leaves a great surface finish, has a 1-1/2" cutting diameter, a 5/8" cutting length, a 2-1/2" overall length and a 1/2" shank. Router not included..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

KOWOOD 1/2” Inch Shank 2-1/4” (Dia.) Bottom Cleaning Router Bits (Mortising Bit, Spoil Board Surfacing, Slab Flattening Woodworking Milling Cutter) with Carbide Tipped

  • ✔ 2-1/4” Inch Diameter and 11/16‘’ Inch Depth with 1/2” shank High performance Bottom Cleaning Router Bit.
  • ✔ High-grade carbide maximum strength and durable. Shank is to manufacturing precision measurement with a quality check to minimum tolerance and vibration during spinning.
  • ✔ Problem-free Router bit, it is suitable for all range’s router such as handheld router and table router.
  • ✔ Reliable Router bit for DIYer and 100% satisfy to experienced woodsmith. Specify for flat surfacing in the wood work project for any art or craft.
  • ✔ Kindly reminder for our customer checks the shank size for your router takes to avoid ordering in mistake. All dimensions and weight are in description below.
Check Stock

Genmitsu T-Slot Table 3040 Extension Aluminum Spoilboard, Work with 3018 Y-Axis Extension Kit, Compatible with Most 3018 CNC, 3018-PROVer/3018-PROVer Mach3/3018-MX3

  • Compatibility: Use this kit with the 3040 Y-Axis Extension Kit for your 3018 CNC, and make your base more stable and durable..
  • Application: Combine your Original Aluminum Profile with the one that comes from this kit, and easily extend your 3018 Aluminum Spoilboard to 3040 Aluminum HDF Spoilboard..
  • Smooth Finish: The aluminum base has a smooth finish for easy mounting of spoil boards or jigs..
  • Easy to Use: The Aluminum Base comes with 4 T-Slots on both sides. It’s easy to install and can be used with most bench clamping systems..
  • Increase rigidity & expand your mounting options: The aluminum base is a great platform to build on and expand with a spoilboard or specialty jigs..
Check Stock