Reviews Split Conduit Couplings

Westinghouse Lighting 70272 7027200 12" Lamp Pipe Kit, 1 Pack, Yellow

  • 12, all thread lamp pipe Kit, zinc plated steel, includes two: 1/8Iron pipe x 12Threaded pipe, two 1/8Iron pipe couplings.
  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
Check Stock

Leviton 42777-1WA Surface Mount Backbox, Single Gang, White, Box Depth Is 1.89 Inches

  • For use with conduitDescriptionThomas & Betts 583611/2-30 Single Gang Utility BoxThomas & Betts 583611/2-30 Single Gang Utility Box Features:Three 1/2" each side conduit knockoutsOne 1/2" each end conduit knockoutsTwo 1/2" bottom conduit knockoutsFactory provided raised ground screw locationSteel13.0 cubic inch capacity1-7/8" deep with conduit knockouts.
Check Stock

4 Gauge Audio Amplifier Installation Wiring Systems KIT,Make Connections and Brings Power to Your Radio,Subwoofers and Speakers

  • 17FT High Performance RCA Interconnect Cable.
  • Low noise and distortion, this amplifier runs quietly and efficiently..
  • With a Gold Plated AGU In-line Fuse( maximum current:60A) Holder to protect the audio system from damage by the overload current..
  • Great product for the money, All wires are plenty long for your installation needs and Rubber couplings included..
  • Very easy to install this Audio System Speaker Kit,Top quality and construction of material,Clean package neatly packed, good strong rubberized sleeves for the wires..
Check Stock

Klein Tools 9319RETT Level, Magnetic Torpedo Level with Tether Ring, Rare Earth Magnets, and V-Grooved Edge for Pipe and Conduit

  • Torpedo Level includes split ring to tether level while working at height.
  • Level's powerful Rare-Earth magnets, up to 5X stronger than strip magnets, hold firmly to iron and steel surfaces.
  • Strong, extruded aluminum frame features a convenient built-in hang hole.
  • Top-read level window simplifies viewing in tight areas.
  • Handy V-grooved edge for pipe and conduit work.
  • Large, highly visible vials: plumb, level and 45 degree.
Check Stock

Klein Tools 25951 Electrician s Step Drill Bit Set Spiral Double Fluted Titanium Nitride Coating 1/4-Inch Impact Shank Case 3-Piece

  • 3 STEP BITS sized 7/8, 1-1/8, 1-3/8-Inch are perfect for hole cutouts in panels and j-boxes to accommodate most commonly used conduit sizes.
  • TWO SPIRAL FLUTES on each step drill bit remove chips and help pull the bit through material for faster cutting.
  • TITANIUM NITRIDE COATING to help dissipate heat for longer bit life.
  • 1/4-INCH HEX SHANK for firm, positive grip in standard drills and impact drivers.
  • SPLIT POINT TIP starts hole cuts quickly and prevents drifting when pressure is added.
Check Stock

HydroMaxx Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit (1\ Dia x 25 ft)

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Woods Southwire 55094222 Liqua Flex 1/2-Inch by 50-Feet Non-Metallic Liquidtight Flexible Conduit

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1/2inch50ft Electrical Conduit Kit,with 5 Straight and 3 Angle Fittings Included,1/2 in Dia

  • 【PREMIUM Liquid-Tight Conduit】- Length:50"，ID：1/2inch，OD：0.83inch，Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical....
  • 【Complete Accessories】-1/2-Inch 50 Foot Flexible Electrical Conduit with 5 Straight and 390-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

Woods 55082122 AL Flex Fo5000050M Type Rwa Reduced Wall Flexible Conduit, 1/2 in X 50 Ft, Aluminum

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock