Reviews Spiral Tap Set

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

TOMMARS 35PCS Bolt and Screw Extractor Set incl. Drill Bit Kit Multi-spline & Sprial Extractors Remover Easy Out Tool for Broken Stripped Screws, Studs, Bolts ect.

  • For quickly removing stripped or broken screws, socket screws, studs and broken off bolts without damaging surrounding area..
  • The extractors are made of higher qualilty CR-MO steel, which has high hardness good toughness, higher strength than chrome vanadium steel. The Drill Bits are made of 4241HSS materials. NOTE: drill bits should not be used for stainless steel..
  • Widely Application: Spiral flute extractors for using on common fasteners where lower torque.
  • Multi-spline Extractors for using on higher torque or lower profile tools. HSS Drill Bits for drilling out the interior of the fastener..
  • Set includes: 6 PCS Spiral flute extractors ( 3/32″ to 7/8″).
  • 13 PCS Multi-spline extractors ( 1/8″ to 1/2″ ).
  • 16 PCS HSS drill bits ( 5/64″ to 1/2″).
  • Can be used with electric hand drill, flat or allen wrenches, tap adapters. Must be slow and gentle when used!!!.
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

YESKING 50-Piece Bolt Extractors Screw Extractor Set, Easy Out Bolt Extractor Set Stripped Screw Remover and Drill Bits for Removing Broken Studs,Frozen,Rounded-Off Bolts

  • 【50-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 4-in-1 screw & nut remover kit and drill bit kit.It contains 13pcs multi-spline screw extractors, 16pcs left hand HSS drill bits, 6pcs spiral screw extractors,13pcs nut removers,1pcs extension bar and 1pcs ratchet wrench.Multiple specifications and sizes to meet your various work needs..
  • 【HIGH QUALITY HSS & CR-MO】: The drill bits of this extractor set are made of high speed steel. The screw and nut extractor kit is made of chrome molybdenum steel. These two excellent materials are harder and tougher and can be used for a variety of metal fasteners. The reverse spiral groove design bends downward to provide maximum grip..
  • 【HIGH CARBON STEEL DRILL BITS】: 135° angle design of the head for easier access to fasteners and improved efficiency.High speed steel, strong than cobalt bits and not easy to wear. Surface titanium nitride coating, effective anti-corrosion and anti-rust, prolong the service life..
  • 【CR-MO NUT REMOVERS】: All premium industrial grade bolt extractors are tightly designed. Grip firmly, not easy to fall off, provide more torque. ....
Check Stock

6PCS Combination Drill and Tap Bits, Metric Thread M3-M10 HSS Drill Bit Set 1/4” Hex Shank Screw Tapping Tool for Tapping and Lathe (Titanium Plating)

  • 【6 Different Sizes】 6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements, can use for tapping various threads.
  • 【Designed with Drilling Function】 They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • 【Spiral Flutes Design】 These taps are designed with spiral flutes and the chip clearing process would be better.
  • 【High Hardness & Rust Resistance】 These taps are made by high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • 【Widely Application】 Suitable for drilling and tapping on wood, plank, plastic, soft metal like aluminum, iron, etc. Ideal for hole drilling, tapping and deburring/countersinking applications.
Check Stock

40 Piece Tap and Die Set,SAE Inch Sizes, Essential Threading Tool with Complete Accessories and Storage Case, for Cutting External and Internal Threads, SAE Thread Types: NC, NF, NPT, by NAKAO

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

XJX Screw-Extractor Set | Easy Out Bolt Extractor Set | Multispline and Spiral Extractor Set | Perfect for Stripped Screws, Studs, Fittings, and Lugs, Left-Hand Drill Bits | 1/8" to 13/32"（25-Piece）

  • 【25-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 3-in-1 screw & nut remover kit and drill bit kit.It contains 10pcs multi-spline screw extractors, 10pcs left hand HSS drill bits, 5pcs spiral screw extractors.Multiple specifications and sizes to meet your various work needs..
  • 【HIGH QUALITY HSS & CR-MO】: The drill bits of this extractor set are made of high speed steel. The screw and nut extractor kit is made of chrome molybdenum steel. These two excellent materials are harder and tougher and can be used for a variety of metal fasteners. The reverse spiral groove design bends downward to provide maximum grip..
  • 【HIGH CARBON STEEL DRILL BITS】: 135° angle design of the head for easier access to fasteners and improved efficiency.High speed steel, strong than cobalt bits and not easy to wear. Surface titanium nitride coating, effective anti-corrosion and anti-rust, prolong the service life..
  • 【CR-MO NUT REMOVERS】: All premium industrial grade bolt extractors are tightly designed. Grip firmly, not easy to fall off, provide more torque. Easily remove damaged bolts, nuts and screws even if they are ....
Check Stock

Drill America - DWTG5/16-18LH 5/16\-18 High Speed Steel Left Hand Spiral Point 2 Flute Tap, DWT Series

  • Tap shoots chips ahead of the cutting action reducing loading and clogging in the flutes.
  • They are recommended for use in through or blind holes.
  • Allow for chip accumulation in the bottom of the hole.
  • Ideal for threading a wide variety of ductile materials, copper and copper alloys, brass and non-metallics.
Check Stock

HARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

  • Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
  • total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stock