Reviews Spiral Point Plug Tap

Spark Plug Repair Kit, 16Pcs Carbon Steel Spark Plug Tap Thread Repair Tools M14 X 1.25 Rethreading Set with Portable Case Suitable for All Kinds of Product that Require High Thread Strength

• Main Function : The spark plug repair tools can be used to quickly and efficiently repair damaged spark plug threads..
• Wide Range Application : Our spark plug thread kit is suitable for all kinds of products that require high thread strength..
• Fully Equipped : This spark plug tap thread is mainly used for clean and rethread spark plug port, which is a complete kit for meeting different needs. 5 x 11mm tap inserts black finish. 5 x 18mm tap inserts black finish. 5 x 18mm tap inserts yellow finish..
• with a Storage Case : This spark plug tap thread comes with a plastic box is provided for convenient storage and carrying. It can also save room for you and easy to find..
• Easy Installation : The spark plug thread repair kit is convenient to install, high strength, long service life..

HEATIT JHSF 60-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

• JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment..
• Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable..
• Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap..
• ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65..
• Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes..

HEATIT JHSF 120-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

• JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment..
• Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable..
• Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap..
• ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65..
• Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes..

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

• Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
• Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
• Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
• cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
• Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
• Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
• Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

• REPAIR PLUGS: The ABN Thread Repair Tool Kit is a time-saving kit that allows you to cut threads to fix a stripped and damaged 14mm spark plug threaded hole port and repair plug configurations in aluminum heads.
• Socket includes metal retainers to keep plug held inside during install and removal.
• VARIOUS APPLICATIONS: Chrome-vanadium steel (CR-V) M14 x 1.25 internal thread size on repair sleeve suitable for damaged spark plug threads to clean and rethread spark plug ports on a BMW vehicle and some Nissan and Toyota engines.
• As long as the head is aluminum and the spark plug hole is straight with room to turn the tap using either a ratchet or wrench, this kit will allow you to repair plugs without removing the head.
• EASY TO USE: Rotate the crankshaft to make sure no ports/valves are open, use the tap to install new threads, choose the proper depth of insert, and screw it firmly into the newly tapped head.
• Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
• PERFECT SIZE: 14mm reamer with 12 points.

Powerbuilt 14mm Back Tap Thread Repair Tool - 640811

• Back-Tap's patented collapsible design allows it to engage be placed through the spark plug hole and into the chamber.
• The Back tap repairs the damaged thread as it is drawn up through the spark plug hole.
• Made in USA. Meets or exceeds ANSI standards..
• Back-Tap 14 millimeter thread straightening tool for spark plug fouled threads.
• Collapsible design allows it to engage be placed through the spark plug hole and into the chamber.

Electric Breast Massage Bra, Boob Massager Electric Electric Breast Massager Deep Tissue Muscle Massage For Electric For Massagers & Accessories

• 3 BUTTONS CONTROL: Switches, default vibration + heating when start.
• Strength button, press +: strength every time, a total of three levels of strength.
• Heating button, red light on when turned on, red light off when turned off..
• ADJUSTABLE DESIGN: Hook & loop + shoulder strap, easy to adjust the size of chest and fix the bra position to fit the skin. USB power cord: 1m / 3.3ft USB cable, can connect to computer and charging cable plug..
• COMFORTABLE MATERIAL: PU leather material is convenient for daily care and can be wiped with water gently. Soft fabric of the inner side, soft and comfortable contact skin..
• WARM ASSISTANT + HAND SIMULATION MASSAGE: Wireless massage: built:in 1200mAh battery, wear without embarrassment. No steel ring wrap, full cover, comfortable to wear, easy to use and good effect. Suitable for home, office, housework, business trip, leisure entertainment to use..
• MULTI:DIMENSIONAL VIBRATION MASSAGE: : Massage the breast point, stimulate the breast vitality. 5 Modes of vibration: soft tap, finger tap, massage, touches and tap. 3 Gears of strength: low strength in the morning, wake up the chest.
• Medium strength at noon, adjust the chest.

Globe

AKM Screw Extractor with Drill Bit Set,bolt extractors,Multi-spline Extractors,and Left Hand Drill Bits for Removeing Broken Studs, Bolts, Socket Screws, and Fittings| SAE

• 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors..
• HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
• Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
• CRMO Material Damaged Screw Extractor:Our AKM screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16",....