Reviews Spiral Flutes Bits

uxcell Spotting Drill Bits 5mm Dia 5mm Shank 60 Degree Solid Carbide AlTiSin Coated 2 Flutes Round Shank Drilling Cutter

  • Spotting Drill Bits: Cutting Edge Diameter: 5mm / 0.2".
  • Total Length : 50mm / 2.0". Large spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip..
  • Wide Applications: Widely used for drilling steel below HRC60, such as stainless steel, carbon steel, die steel, alloy steel. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability..
  • Carbide Tool: Made of fine-grained tungsten carbide, the drill bit has good toughness, high hardness (HRC92), wear resistance and heat resistance. With good cutting strength and drilling effect, carbide tool offers long tool life and faster cutting speeds than other substrates..
  • Easy to Use: Universal chamfered round shank, easier clamping, stable cutting process. Suitable for CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better..
  • Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance..
Check Stock

2/Pack Solid Carbide Drill Bit for Hardened Steel Hard Ness HRa 91.3 Aerospace Standard K20 Tungsten Carbide Jobber Length Twist Drill for Metal 118 Degree Four Facet Point Fractional Size (3/32')

  • ★【Optimal Design for Metal Work】 118° four facet point angle minimizes drill wander and assures accurately sized holes. Our jobber length, precision ground carbide drills are designed for high feed rates with good chip disposal. smooth finish on the bits increases chip flow. Spiral flutes are constructed with a higher flute angle to remove chips more easily..
  • ★【Specs】 Tungsten Carbide Grade (ISO): K20 / Binder: %8 Cobalt / Hardness: 91.3 HRa / Uncoated / Flute Length: 1 inch, Overall Length: 2 inch, Drill Size: 3/32 inch.
  • ★【IMPORTANT, PLEASE READ BEFORE BUYING】 tungsten carbide or cemented carbide is a composite material, although it looks like a metal, it is a composite of Tungsten carbide powder mixed with cobalt as a binder metal and the resulting material is more like a ceramic than a metal. It is a very hard material being a 9 on the Mohs scale where diamond is a 10, quartz a 7 and hard steel around 4.5. Due to its hardness, it will chew down into most anything But that hardness makes them brittle on side lo.
Check Stock

2/Pack Solid Carbide Drill Bit for Hardened Steel Hard Ness HRa 91.3 Aerospace Standard K20 Tungsten Carbide Jobber Length Twist Drill for Metal 118 Degree Four Facet Point Fractional Size (5/32″)

  • ★【Optimal Design for Metal Work】 118° four facet point angle minimizes drill wander and assures accurately sized holes. Our jobber length, precision ground carbide drills are designed for high feed rates with good chip disposal. smooth finish on the bits increases chip flow. Spiral flutes are constructed with a higher flute angle to remove chips more easily..
  • ★【Specs】 Flute Length: 1-3/8 inch, Overall Length: 2-1/2 inch, Drill Size: 5/32 inch // Tungsten Carbide Grade (ISO): K20 // Binder: %8 Cobalt // Hardness: 91.3 HRa // Uncoated.
  • Tungsten carbide is a composite material, although it looks like a metal, it is a composite of Tungsten carbide powder mixed with cobalt as a binder metal, the resulting material is more like a ceramic than a metal. It is a very hard material being a 9 on the Mohs scale where diamond is a 10 and hard steel around 5. It will chew down into most anything but the hardness makes them brittle with virtually no plasticity. Unstable drilling can result in a broken bit. These drills like a a rigid dri.
Check Stock

Amana Tool - 46202-K Solid Carbide Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia

  • SPIRAL PLUNGE BIT – Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action....
  • FOR USE WITH – Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits..
  • CUT CLEAN – Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate,....
  • SOLID CARBIDE – Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our Spektra bits feature a....
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in....
Check Stock

2/Pack Solid Carbide Drill Bit for Hardened Steel Hard Ness HRa 91.3 Aerospace Standard K20 Tungsten Carbide Jobber Length Twist Drill for Metal 118 Degree Four Facet Point Fractional Size (3/16")

  • ... ★【Optimal Design for Metal Work】 118° four facet point angle minimizes drill wander and assures accurately sized holes. Our jobber length, precision ground carbide drills are designed for high feed rates with good chip disposal. smooth finish on the bits increases chip flow. Spiral flutes are constructed with a higher flute angle to remove chips more easily..
  • ★【Specs】 Flute Length: 1-5/8 inch, Overall Length: 2-3/4 inch, Drill Size: 3/16 inch // Tungsten Carbide Grade (ISO): K20 // Binder: %8 Cobalt // Hardness: 91.3 HRa // Uncoated.
  • Tungsten carbide is a composite material, although it looks like a metal, it is a composite of Tungsten carbide powder mixed with cobalt as a binder metal, the resulting material is more like a ceramic than a metal. It is a very hard material being a 9 on the Mohs scale where diamond is a 10 and hard steel around 5. It will chew down into most anything but the hardness makes them brittle with virtually no plasticity. Unstable drilling can result in a broken bit. These drills like a.
Check Stock

uxcell Cemented Carbide Twist Drill Bits 8.5mm Metal Drill Cutter for Stainless Steel Copper Aluminum Zinc Alloy Iron 6 Pcs

  • Cemented Carbide Tip: 8.5mm twist drill bits are made of cemented carbide tip for long service life, more sharp and durable than others.
  • Features: Milled U-flutes with deep-cut spiral delivers fast material removal. Suitable for drilling in tough metal, including heavy-duty abrasive alloy and hardened steel.
  • Use For: Drilling clean, accurate holes in sheet metal, steel, copper, brass, aluminum, plastic, wood, stainless steel and cast iron.
  • Use Note: Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
  • Round Shank Design: Round shank twist drill bit can work with a electric drill (Excluding in the item)..
Check Stock

COMOWARE Titanium Twist Drill Bit Set - 13 Pcs Hex Shank High Speed Steel for Wood Plastic Aluminum Alloy Quick Change 1/16 -1/4

  • HSS Titanium Coating - Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean..
  • Flutes Form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process..
  • Quick Change - 1/4 inch hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck..
  • Meet Your Demands - Great drill bits set for metal/wood/plastic countersink. Suitable for Home DIY, and General Building/Engineering Use..
  • Organized Holder - A drill bits holder with size index is included in the set for easy storage and organizing. The drill bits set fits the majority of brands currently on the market..
Check Stock

IRWIN Screw Extractor, Spiral Flute, 6-Piece (53545)

  • Designed to remove broken studs, bolts, socket screws, and fittings.
  • Aggressive left hand spiral design for extra gripping power.
  • Easy out style spiral flutes embed themselves to increase grip as resistance increases.
  • Extractor size and recommended drill bit size are etched on each tool.
  • Set includes spiral flute screw extractors sizes EX-1, EX-2, EX-3, EX-4, EX-5, and EX-6.
Check Stock

Yakamoz 10 Pack 1/8" Shank Spiral CNC End Mill Router Bits Upcut Milling Cutters for MDF Acrylic Wood PVC, 4 Flutes, 15mm Cutting Length, Flat End

  • Type: Spiral (Upcut), Cutting Type: 4 Flutes with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 0.59" (15mm), Overall Length: 1-33/64" (38.5mm).
  • High quality carbide end mill provides good milling & cutting performance to ensure high work efficiency and to maximize worker efficiency..
  • These bits own sharp edge which is able for fast engraving that makes high efficiency, high precision,smokeless and burr-free while processing..
  • For CNC,engraving machine woodworking, carving milling soft and hard wood, plywood, plastics, MDF, PVC, aluminum, composite board, etc..
  • Made of tungsten steel material with industrial quality control to ensure best performance and long life use..
Check Stock