Reviews Spindle Head

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 5-4.5 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

Grizzly Industrial G0709-14 x 40 Gunsmithing Gearhead Lathe

  • 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve 1/2" drill chuck w/ MT#3 arbor.
  • Dimensions 51-3/4"H, 71-3/4"L, 30"W Approximate shipping weight 1550lbs 11" face plate.
  • Motor 2 HP, 110/220V, single-phase, 20/10 Amps, 60Hz, 1725RPM Number of speeds 8 Range of speeds 70-2000RPM.
  • Spindle bore 1-9/16" Spindle nose taper MT#5 Spindle nose D1-5 Camlock D1-5 spindle nose (6 pin) 1-9/16" spindle bore.
  • Swing over bed 14" Swing over gap 19-3/4" Swing over cross slide 8-3/4".
Check Stock

SOUTHWEST WHEEL 5-Hole, 4.5\ Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) 1\ Spindle

  • Round R30484X 84 Spindle & 6-5.5" Bolt Circle Trailer Hub..
  • 6 studs 5.5" Bolt circle using L68149 inner and L44649 outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs..
Check Stock

VGEBY Fishing Reel, Water Drop Baitcast Fishing Wheel Fishing Accessory for Saltwater (Right-Hand)

  • -- BRAKING SYSTEMS: Casting reels are equipped with braking systems that help manage the speed of the rotation of the spool during a cast in order to minimize damage..
  • -- MAGNETIC ADJUSTING KNOB: The head of the low-profile reel has a magnetic adjusting knob with a magnetic brake force of grade 0 to 9. After pressing the button, the wire wheel can give out line, shake the rocker arm, the release switch, then it can reset..
  • -- SPINDLE TWEAKING KNOB: The spindle tweaking knob is used to adjust the outlet speed of the wheel, as it is easy to lead to damage if too loose, while too tight will affect the throwing distance..
  • -- ADJUSTABLE: The star shape spanner is used to adjust the unloading force of the low-profile reel, usually adjust until the hand can not pull the line..
  • -- GUARANTEE: If you are not satisfied with our product received, you can apply for unconditional return and refund within 180 days. In terms of any problem of this product, you can send emails to us at any time. We will reply you as soon..
Check Stock

Rigid Hitch Trailer Hub Kit - for 1-3/8\ Inner / 1-1/16\ Outer Tapered Spindle - 5 Bolt on 4-1/2\ Bolt Circle

  • Round R30484X 84 Spindle & 5-4.5" Bolt Circle Trailer Hub.
  • 5 studs 4.5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock

RIGID HITCH INCORPORATED Pair of 4-Bolt on 4 Inch Hub Assembly (AKSQ-200044) Includes (2) Square Shaft 1 Inch Straight Spindles & Bearings

  • Round R30484X 84 Spindle & 5-5" Bolt Circle Trailer Hub.
  • 5 studs 5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock

Staedtler - Set Square 22cm

  • Precision geometry compass with spindle guide, spring-bow head and centre wheel.
Check Stock

Grizzly G0755 Heavy-Duty Mill/Drill with Stand and Power Feed

  • Motorized headstock elevation on dovetailed column.
  • Spindle speeds change with convenient gear-head levers instead of V-belts.
  • Fine downfeed control and adjustable depth stop.
Check Stock

JET J-2550 20-Inch Drill Press 12-Speed 1Ph 115V 354402

  • ACCURACY: 2-1/4" quill allows greater accuracy..
  • SUPPORT: Large 3-5/8" diameter ground steel column and cast iron head..
  • VERSATILITY: Production table tilts up to 45°..
  • PRECISION: Accurate depth stop for precice hole depths..
  • SAFETY: Telescoping safety spindle guard..
Check Stock