Reviews Spark Plug Non Fouler 18mm

E3.54 E3 Premium Automotive Spark Plugs (4 PACK) - 100K miles / 5 years Warranty

  • FOR OPTIMAL PERFORMANCE: Automotive spark plug that fits primarily Ford applications, designed to increase power, reduce fuel consumption, and improve hydrocarbon emissions.
  • PATENTED TECHNOLOGY: DiamondFIRE ground electrode is secured to the shell with 3 legs that help facilitate excellent heat transfer and increase turbulence in the cylinder.
  • INCREASED DURABILITY: Designed with colder heat ranges to enable performance modifications, and contains Yttrium-enhanced alloy for up to 8% reduction in side wire temperature for less pre-ignition.
  • WHAT'S INCLUDED: One (1) E3.72 spark plug. Features 18mm thread diameter.
  • 0.430-inch thread reach plug with taper seat.
Check Stock

Spark Plug Tester 0 to 6000rpm Adjustable Spark Tester with Two Spark Plug Socket 100-240v with Protective Cover Ignition Tester Heat Resistance Spark Tester Automotive Tools for 12mm Spark Plug

  • 【Dual Hole Testing & Protective Cover Protection】Spark plug tester has two spark plug socket,it can test two spark plugs (good spark plug & bad spark plug) at the same time.By comparing the spark intensities of the two spark plugs,judge the performance and ignition intensity of the spark plugs,and replace the broken spark plugs in time.The design of the protective cover can prevent you from the risk of electric shock during the test,which effectively guarantees your safety during the operation..
  • 【0~6000rpm Working Frequency Adjustable & More Accurate Data】The automotive tools has a wide adjustment range of working frequency.By operating the rotary switch,you can adjust the working frequency in the range of 0~6000rpm,the higher the set frequency,the stronger the spark intensity.Spark plug tester can also simulate the work of the engine,restore the authenticity of the car rotate speed,save time and high efficiency,and the data is more accurate,which can better test the spark plug..
  • 【High-Quality ABS Material With Impact Resistance & Heat Resistance】Ignition tester is made of high-quality ABS material,which has the characteristics of impact resistance and heat resistance.It can provide you with long-term service and reduce the cost caused....
Check Stock

Ignition Coils Caps and Wire - Compatible with Honda CB750/900/1000/​1100F - 1979-1983

  • Replaces Honda Part Numbers: 30500-422-003, 30500-422-013 - Coils003cbr /003eReplaces Honda Part Numbers: 30700-MC8-000, 30700-MW3-000 - Caps.
  • Sold as a set of 2 coils with 8 ft. of spark plug wire and NGK 102 Degree Spark Plug Cap - Quantity 2 NGK Straight Spark Plug Cap - Quantity 2.
  • Coil Length: 80mm (3.1") - Total coil length including wire leads and mounting brackets: 125mm (4.9") -.
  • Coil Diameter: 53.5mm (2.1") - Mounting holes: 102mm (4") apart center to center.
Check Stock

8 Pcs Spark Plug Wire Boots 1200 Degree Heat Shield Thermal Protection Insulator Sleeve Cover, 6" Spark Plug Wire Protector (Black)

  • [PROTECTION] Designed to provide the best protection for spark plug wire, effectivly protects spark plug boots and wires from excessive engine and exhaust heat, keep spark plug stay cool in a high temperature environment, isolate from chemicals, extends service life of spark plug wire and boots..
  • [DURABLE SPARK PLUG WIRE BOOTS] Made of high-quality double wall braided fiberglass sleeving that you can use for a long time..
  • [UNIVERSAL COMPATIBILITY] Works with most angled and straight boots. Fits most hot rods and classics engine, such as 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 engines..
  • [EASY TO USE] Measuring 1.18*6.3" in dimension. Just slip on and sewn end over spark plug. Suitable for all spark plug boots and wires up to 1200 Degrees Fahrenhett (648.89° C)..
  • [WHAT YOU RECEIVE] Package includes 8 plug boots. We offer 12-month warranty and returnable service, please buy with confidence. Welcome to let us know if you have any questions or concerns, our customer service team will respond within 24 hours..
Check Stock

TIME-SERT M12x1.25 Spark Plug Thread Repair kit with Inserts p/n 4212-125

  • M12x1.25 spark plug thread repair kit with 6 inserts by TIME-SERT.
  • Includes 2) inserts 9mm 2) inserts 15mm 2) inserts 17.5mm reach.
  • Spark plug thread repair kits by Time-Sert professional thread repair.
  • Fast and reliable repair by Time-Sert M12x1.25 spark plug repair kit.
Check Stock

4 Wire Set Marine Spark Plug Wire Lead Fits for Johnson Evinrude 90 115 HP Outboard Engines OE Replacement 18-8839 9-28092 Premium Ignition Spark Plug Wire Set

  • Boat Wire Technology Plug Wire Kit Fits the Following Vehicles: The ignition spark plug wire set fits for Johnson Evinrude 90, 115 HP 4 cyl | Please check the fitment before placing orders, thanks..
  • Replace OE Number: Plug wire set boat premium wire replacement part number 18-8839, 9-28092 | Great replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% rigorously tested before shipping..
  • Excellent Function: The spark plug wire is used as the medium between the ignition coil and the spark plug, to power the engine, it can pass the high voltage fire divided by the distributor to the spark plug, and then push the engine to rotate | Damage to the spark plug wire of the engine will cause the engine to misfire, the phenomenon that causes the engine to shake, timely replacement of damaged spark plug wires can extend the life of the engine and reduce fuel waste..
  • OEM Design, Direct Fit: Made of premium silicone and equipped with stainless steel terminals, the pure silicone protective cover provides maximum thermal protection | Even though this is not a genuine original equipment spark plug wire, but it works even better and lasts longer at a much lower price | Save time and hundreds of dollars by replace ....
Check Stock

ARES 11017-14mm 3/8-inch Drive Thin Wall Magnetic Spark Plug Socket - 12-Point Design For Enhanced Grip and Fit - Walls 2mm Thinner Than Standard Spark Plug Sockets

  • SPECIFICATIONS: This ARES 14mm Thin Wall Magnetic Spark Plug Socket is 3/8-inch drive and features walls that are only 17.7mm thick compared to the 19.7mm thickness found on standard 6-point spark plug sockets. Constructed of durable, heat treated Chrome Vanadium Steel, this socket also features a mirror polish finish for easy cleanup and a professional look with high visibility markings for easy identification..
  • DESIGN: The socket's interior magnet retains and protects the spark plug for easier installation, and the 12-point design allows for enhanced gripping power and fit..
  • MADE TO LAST: The interior magnet in this socket won't wear out over time like traditional rubber gaskets, so this spark plug socket can provide years of reliable use. This spark plug socket meets and exceeds ANSI/ASME standards..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Magnetic Spark Plug Socket, simply contact customer service for troubleshooting help, parts, replacement, or refund..
Check Stock

EASYBERG Spark Plug Wire Separators Aluminum Kit, 7mm 8mm 9.5mm Engine Spark Plug Wire Separator Divider for Looms SBC 350(Blue)

  • ※Fits 7mm 8mm 8.5mm 9mm 9.5mm Spark Plug Wires.
  • ※100% Brand New Spark Plug Ignition Wire Separators Holders.
  • ※This Spark Plug Wires Set includes wrench, convenient to use.
  • ※Very Simple Easy Way To Clean Up The Engine Bay & Keep The Wires From Heat.
  • ※Package Inlcludes:(2PCS) 4 Hole (2PCS) 3 Hole (2PCS) 2 Hole And Hardware.
Check Stock

HKS Spark Plug Connector Crimping Tool For Ignition Cable and Spark Plug Wire – Ratcheting Wire Crimpers – Max Diameter 8.5mm – Ratchet Terminal Crimper – Electrical Crimping Tool

  • Professional Crimper – This crimper features an efficient ratchet mechanism and finish-machined crimp die for a solid crimp. This crimping tool fits perfectly with spark plug terminals with a diameter of 8-8.5mm..
  • Precise Mechanics – The crimping process is accomplished by pressing the handle through a complete ratcheting cycle until the handle is automatically released. Due to the ratchet, you are able to secure the connector first and then insert the wire into the crimp..
  • Adjustable Crimp Force – The tool has a knob that adjusts the crimp strength to ensure the right crimp force for your project. Equipped with a quick release lever allows the crimper jaw to be opened in any position..
  • Ergonomic Handles – Ergonomic, cushioned, non-slip handles are designed to ensure a strong grip in all situations..
  • Crimp & Strip 2 in 1 – Suitable for single & dual spark plug crimp terminals.The crimper fits for the spark plug wire diameter of 8.5mm..
Check Stock