Reviews Soundboard Brace Chisels Set

Sony PS3 Street Fighter IV FightStick Tournament Edition

  • Two Soundboard Modes: SoundBoard Classic Mode and Stage Mode..
Check Stock

TcnoMreol Concrete SDS Chisel Bits Set, 8pcs Chrome Steel SDS Plus Pointed Flat Wide Scaling Chisels Gouge Scraping Chisels Angled Bent Removal Chisel for Concrete, Brick , Masonry Max to 7/10*11*3In

  • ...shot peening treatment, increasing toughness and hardness, and reducing wear to a greatly. And the handle designed by optimal geometry, high occlusion, matched perfectly, easy for installation, also, can reduce vibration when working, provide high working efficiency and long use life..
  • Size: Come with 8pcs different chisels, 2pcs Point chisels, 11/20"*5-9/10"(14*150mm), 11/20"*9-4/5"(14*250mm), 2pcs Flat chisels, 11/20"*5-9/10"(14*150mm), 11/20"*9-4/5"(14*250mm), 2pcs Scraping chisels, 11/20"*5-9/10*1-14/25"(14*250*40mm), 11/20"*9-4/5"*2"(14*250*50mm), 1pcs Hollow Grooving gouge chisels, 11/20"*9-4/5"(14*250mm), 1pcs Scaling chisels, 7/10*11*3"(17*280*75mm). These chisels can meet all kinds of your need.
  • Widely application: With round shank, these chisels applicable to all SDS-plus hammer, and widely for the removal and drilling of concrete, brick, masonry and granite, and Hollow grooving gouge chisels special used for removal of walls, tiles and cement, also for wire groove..
  • Warranty: We promise provide you good service, if there is any problems, you can contact us directly, we will solve your problems timely and refund and new replacement is available.
Check Stock

Narex 6 Piece Richter Extra Bevel Edge Chisel Set (1/8, 1/4, 3/8, 1/2, 3/4 and 1) in 9 Pocket Canvas Tools Roll

  • To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a fr....
Check Stock

Taytools 468440 Hollow Chisel Mortise 3-Piece Sharpening Kit with Handle and Diamond Cones 200 and 600 Grit for Chisels Up To 1/2 Inch

  • Easily sharpen and maintain the edge on your hollow chisel mortice chisels with this 3 piece Mortise Chisel Sharpening Set..
  • Set includes a quick-change handle with magnetic chuck, and 2 diamond abrasive cones, 220 and 600 grit..
  • Use the 220 grit cone to remove any nicks or burs and the 600 grit cone for final honing..
  • Diamond abrasives will hone the hardest of steels with ease..
Check Stock

VonHaus 10 pc Premium Chisel Set for Woodworking with Honing Guide, Sharpening Stone and Wooden Storage Case

  • SET INCLUDES: Set comprises 1 x ¼” chisel, 1 x 3/8” chisel, 1 x ½” chisel, 1 x ¾” chisel, 1 x 1” chisel, 1 x 1 ¼” chisel, 1 x 1 ½” chisel, 1 x 2” chisel (6mm, 10mm, 13mm, 19mm, 25mm, 32mm, 38mm, 50mm) 1 x honing guide and 1 x aluminum oxide sharpening stone (120/200 grit)..
  • HEAT TREATED: Heat-treated, chrome vanadium steel alloy blades with narrow side bevels.
  • ERGONOMIC: Rubberised ergonomic grip handles with metal strike caps.
  • WOODEN STORAGE CASE: Supplied in a professional, neat wooden storage case..
  • DOMESTIC and PROFESSIONAL USE: Splitproof chisels that are suitable for home woodworking and professional craftsman. CHISELS WILL NEED SHARPENING ON ARRIVAL..
Check Stock

KAKURI Japanese Wood Chisel Set [Long Handle] 3 Piece for Woodworking, Made in JAPAN, Japanese Oire Nomi for Carve, Mortise, Dovetail, Sharp Japanese Carbon Steel, Red Oak Wood Handle

  • 3 SET OF JAPANESE CHISELS: Ideal Japanese wood chisels set for woodworking beginners. Blade sizes are popular with three widths 9mm (3/8"), 15mm (5/8"), and 24mm (15/16"), and can be widely used for various types of works such as architecture, building furniture, carving, mortising, making tenon, Japanese Kumiko, and DIY..
  • SHARP JAPANESE STEEL BLADE: Only Japanese high-grade materials are used. The blade edge is laminated with softer iron, and it realizes great sharpness, durability, and ease of blade sharpening on a whetstone. Also, the blade back is hollow ground. Each side of the blade is chamfered to reduce resistance during cutting, enabling cleaner chiseling with less force. All KAKURI products are manufactured in Japan and handcrafted by Japanese craftsmen..
  • QUALITY RED OAK x LONG HANDLE: The handle is made of Japanese red oak. Red oak is more durable than white oak and is used in only high-quality chisels in Japan. The handle is a 4" extended version that is easy to grip for even those with large hands to tap with a hammer. In addition, the KATSURA hoop is set deep in the handle for easy and quick hoop setting before use..
  • OFFICIAL ENGLISH INSTRUCTION: KAKURI Official English instruction is included..
  • PRODUCT SPECIFICATIONS: Made in Japan / Blade....
Check Stock

FLEXCUT Carving Tools Chisel Micro Tool Set High-Carbon Steel Blades with Solid Ash Handle Set of 4 MT100

  • Chisels are 1/16 - 1/8 - 3/16 - and 1/4 inches wide or 1.5 - 3 - 5 and 6mm.
  • Perfect for carving fine detail like mouths or eyes.
  • Razor-sharp hard carbon steel blade is ready to use right out of the package.
Check Stock

Narex 853654 4 Piece Set of Richter Extra Bevel Edge Chisel (1/4, 1/2, 3/4 and 1 inch) Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrules

  • To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a fr....
Check Stock

Narex 853653 3 Piece Dovetail Chisel Set of Richter Extra Bevel Edge Chisel (1/4, 3/8, and 1/2 inch) Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrules

  • To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a fr....
Check Stock