Reviews Solids Control Equipment

YCKYIGO Salt Water Pool Tester Large Range 7 in 1 Multi-Parameter Tester for Salt Swimming Pool and Spa

...igher the ORP value in water, the stronger the oxidative power and sterilization ability. The ORP's can reflect the residual chlorine (FAC) levels in the Saltwater pool..
【Highly Sensitive PH Probe】A low pH means the water is acidic, which can be corrosive to pool equipment and pool surfaces. It may also cause skin and eye irritation. A high PH value can greatly reduce the effectiveness of chlorine and cause the water to become cloudy. To avoid problems, it’s important to try and keep it within the ideal range of 7.4–7.6. This PH test pen will do the job perfectly..
【Platinum Electrodes for TDS】Total Dissolved Solids (TDS) is a measurement of all dissolved solids in pool water. The higher the TDS reading, the harder it is to maintain clean, clear pool water. Pools with high TDS tend to have chronic issues with cloudy water. Keep in mind that saltwater pools will have a higher TDS level because of the higher salt content. The rule of thumb is that TDS levels should not be higher than 1500 ppm above the salt level reading..
【Factory Calibrated for Ease of Use】The Multifunctional digital detection tool wit....

AUTO BODY COMPOUND: Cuts fast with minimal swirls.
HIGH SOLIDS: Successfully tested in high solids production shops.
EASY CLEANUP: Low-dusting, low-splatter formula cleans up with ease.
VERSATILE USE: Safe and effective on all clear coats, high solids, lacquers, enamels, and all refinished and OEM glossy paints.
PROFESSIONAL LEVEL: Formulated to be effective by rotary buffer and is body shop safe.

True Colloidal Silver - Ultra Silver is nano sized and stays in suspension indefinitely. The process is scientific, complicated and precise. It requires laboratory grade techniques and industrial level equipment to produce. Ultra Silver will not degrade or settle out over time. It is non reactive which makes it ideal for storage and use anywhere..
Lab Certified PPM - We independently test and guarantee our parts per million (PPM) concentration level. We openly share the results which you may find in the product pictures. A TDS meter WILL NOT measure PPM, only total dissolved solids..
Not Ionic - Ionic silver is not colloidal silver. Many products are marketed as colloidal silver, but are actually ionic silver. These will be clear, have a PPM of less than 30 and are produced simply by electrolysis (you may do this at home)..
True Color - As the concentration increases, a true colloidal silver transitions from a golden amber to a dark brown. This is the natural coloration of a concentrated, nano sized, true colloidal silver product..
Economical - Ultra Silver has concentration levels far beyond other brands. Our price structure gives us value not found anywhere else! Ultra Silver is typically 15 to 50 times more concentrated than competing produc....

...o resists chipping, cracking, and UV ray fading..
NOTE: Kit Not Available for Purchase in California or Other States with VOC limits below 3.5 VOC. Restoration Shop's (UBLV) is a Low 3.5 VOC compliant basecoat/clearcoat paint system that is available for purchase in 3.5 VOC limit States. Check your local air quality control district for more information on VOC rules and regulations in your area before purchasing.003cp003e.

Works with all 38-56kHz IR remote control and devices with an IR input port..
Low current drive, low power consumption, long launch distance, small size installed..
Applied to infrared forwarding equipment, audio and video transmission equipment, IR remote wireless transceiver, centralized control equipment, etc..
Please note that the infrared emitter head is glued to the side of the infrared receiver tube, do not cover it, otherwise the device will not be used, and it will be insensitive to remote control by remote control..

Works with all 38-56kHz IR remote control and devices with an IR input port..
Low current drive, low power consumption, long launch distance, small size installed..
Applied to infrared forwarding equipment, audio and video transmission equipment, IR remote wireless transceiver, centralized control equipment, etc..
Please note that the infrared emitter head is glued to the side of the infrared receiver tube, do not cover it, otherwise the device will not be used, and it will be insensitive to remote control by remote control..

✔ Automation Equipment Control -- Control various automation industrial equipment, flashlights, buzzers, relays, microcontrollers, or other electrical load devices. An ideal choice for automated industrial equipment and power monitoring.
✔ High Accuracy Stable Performance -- Compared with traditional device, thermal protectors and other devices, it has the advantages of high accuracy, stable performance and long service life. Installation Form: Guide Rail 35mmDIN.
✔ Convenient Monitoring Detecting Current -- The current sense switch is for safety, simple, and convenient monitoring or detection of current in the electrical equipment. Threading Hole Diameter: 8mm. Shell Material: Fireproof ABS.
✔ Used In Industries Current Monitoring -- Widely used in substation, frequency conversion speed control device, inverter device, electrolytic plating, electric locomotive, street lamp monitoring, coal mine and other automation industries that need current monitoring.
✔ Electromagnetic Mutual Inductance Of Current -- Using the principle of electromagnetic mutual inductance of current, the advanced output detection, monitoring and protection alarm products developed by the non-power supply technology are adopted.

A traditional hand, maximum wash performance, and no-dye-lot solids make this yarn ideal for afghans, sweaters, accessories and more. Made in USA from Imported Fibers. This yarn has no dye lots..
Recommended Knit Needle Size: US 8 (5mm) for gauge: 17 sts x 23 rows = 4” (10 cm) Recommended Crochet Hook: size I - 9 (5.5mm) for gauge: 12 sc x 15 rows.
Each skein: Solids: 7 oz (198g), Prints & Multis: 5 oz (141g), Flecks & Heathers: 5 oz (141g).
Solids: Approx.364 yds (333 m), Prints & Multis: Approx. 236 yds (215m), Flecks: Approx. 260 yds (238m).
2 skeins in package. Both skeins in package dye lotted in the same batch..