Valefod 10 Pack DC to DC High Efficiency Voltage Regulator 3.2-35V to 1.25-30V Buck Converter DIY Power Supply Step-Down Module

  • 【High Precision】The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects..
  • 【Input Voltage】DC 3.2V to 35V (input voltage must be 1.5V higher than the output voltage, no boost)..
  • 【Output Voltage】DC 1.25V to 30V voltage is continuously adjustable, maximum output current is 3A..
  • 【Mini Size】45 * 23 * 14 mm (with potentiometer). 10pcs included..
  • 【Easy to DIY】Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V).
Check Stock

Valefod 6 Pack LM2596 DC to DC High Efficiency Voltage Regulator 3.0-40V to 1.5-35V Buck Converter DIY Power Supply Step-Down Module

  • 【High Precision】The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state....
  • 【Input Voltage】DC 3V to 40V (input voltage must be 1.5V higher than the output voltage, no boost)..
  • 【Output Voltage】DC 1.5V to 35V voltage is continuously adjustable, maximum output current is 3A..
  • 【Mini Size】45 * 23 * 14 mm (with potentiometer). 6pcs included..
  • 【Easy to DIY】Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue....
Check Stock

AUTOGEN 2-Bank Marine Battery Charger 10-Amp 5-Amp Per Bank Dual Battery Trickle Charger Maintainer 6V & 12V Onboard Battery Charger and Battery Maintainer

  • 【2-Bank, 10-Amp】10 Amp (5 Amp per bank) on-board battery charger for charging and maintaining two 6V/12V batteries independently..
  • 【Widely Batteries】Safely charge and maintain all types of Lead-acid batteries, including wet, gel, AGM, and deep-cycle batteries. Marine battery....
  • 【Automatic Voltage Detection】Auto select 6V/12V mode without keying button, it automatically determines the correct voltage for your target....
  • 【Monitor Power Levels】Solid state two-color LED light indicates the state of the charge. Continuous charging, unlimited time, automatically enter....
  • 【Multiple Security Protection】Multiple security protection, such as over current protection, overcharge protection, overheat protection, reverse....
Check Stock

Dorhea 7PCS LM2596 DC to DC Buck Converter Voltage Regulator 3.0-40V to 1.5-35V Buck Converter DIY Adjustable Power Supply Step Down Module

  • The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can....
  • DC 3V to 40V (input voltage must be 1.5V higher than the output voltage, no boost)..
  • DC 1.5V to 35V voltage is continuously adjustable, maximum output current is 3A..
  • The LM2596 buck module input and output interface can not be reversed. The input voltage must be higher than the output voltage..
  • Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed....
Check Stock

Inkbird Solid State Relay 40DA DC SSR Black Heat Sink for PID Thermostat Temperature Controller

  • 40A Solid State Relay Specifications:Load Voltage: 24-380VAC.
  • Heat Sink Mounting Thread Diameter (Approx.) : 0.5cm / 0.19".
  • Heat Sink Total Size (Approx.) : 8 x 4.9 x 4.9cm / 3.1" x 1.9" x 1.9" (L * W * T ).
Check Stock

KOOKYE 5PCS Temperature Sensors TMP36 Precision Linear Analog Output For Arduino Raspberry Pi

  • 5PCS ADI TMP36GZ temperature sensors,High accuracy solid state temperature sensor..
  • Voltage Input: 2.7V to 5.5V DC,Output range: 0.1V (-40°C) to 2.0V (150°C).
  • Temperature range: -40°C to 150°C / -40F to 302F 2°C accuracy.
  • Outputs an analog voltage that is proportional to the ambient temperature.
Check Stock

Klein Tools ET250 Voltage Meter AC Voltage / DC Voltage Tester Digital Multimeter Low Voltage Tester with Batteries

  • Voltage tester automatically selects voltage or continuity.
  • automatically powers on when any measurement is attempted.
  • CAT IV 600V modern solid-state design for safety.
  • Uses standard replaceable multimeter test leads.
Check Stock

SHARROW Archery Bow Stabilizer Quick Disconnect Adapter Adjustable Mounting Bracket Balancing Adapter for Recurve Compound Bow

  • It is easy to get your weighted dish type stabilizers back in the correct orientation.
  • Stabilizer Quick Disconnect Adapter makes short work of removing and replacing your stabilizer.
  • Nice and solid quick connect very quiet and durable.
  • Makes putting the stabilizer on and taking it off quite easy.
  • This little adaptor is simple way to remove a long stabilizer, which allows you to place your bow in its case.
Check Stock

APC Smart-UPS 750VA UPS Battery Backup with Pure Sine Wave Output (SMT750) (Not sold in Vermont)

  • 750VA / 500W Battery Backup Uninterruptible Power Supply (UPS).
  • Pure Sine Wave UPS provides highest degree of compatibility with active PFC power supplies and electronics.
  • 6 battery backup and surge protector outlets.
  • Smart UPS battery backup with LCD Display.Network-grade power supply conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation (AVR) boosts low input voltage and trims high voltage without battery operation. Network manageable via serial, USB or optional ethernet.
Check Stock