Reviews Solid Carbide Rod

Bohin Mechanical Chalk Pencil with Green Leads

  • ⭐ 17 Pieces Set includes: 2 Pieces solid carpenter pencil with 14 refill red yellow gray refill leads, and 1 piece carbide scriber. The solid carpenter pencil can draw on metal, plastic, glass, wood, paper, etc.
  • The carbide scriber works effortlessly on hardened and stainless steel, ceramics and glass..
  • ⭐ Our solid carpenter pencil with long nosed deep hole design, with extended and needle-nose tip of 45 mm in length, conveneint for marking through holes or in other tight areas. Also with built-in sharpener,you can always sharpening your pencil for precise mark..
  • ⭐ The tip of metal scribe pen made from durable tungsten carbide you can use it for smooth and clear strokes comfortably. Handy pen-style design with convenient pocket clip, it's an essential machining tool can provide precise line..
  • ⭐ Practical Set. Wide Applications. The mechanical marking pencils can not only draw on wood, but also can be applied for metal, concrete, ceramic tiles, cement, glass, ceramics, hardened steel etc., suitable for carpenters, architects and designers.
  • Yellow can be draw on dark surfaces where grey do not draw, you can choose the appropriate color according to the color of the drawing surface..
  • ⭐ If you have any problems or issues, return the product no....
Check Stock

Savannah Carbide Tip Turning Tool Large Size Round Cutter

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind.....
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of....
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The....
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel....
  • The round tool measures appx. 6-9/16" from the tip of the cutter to the ferrule.
Check Stock

Savannah Carbide Tip Turning Tool Large Size Square Cutter

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind.....
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of....
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The....
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel....
  • The square tool measures appx. 6-9/16" from the tip of the cutter to the ferrule.
Check Stock

IDEAL Electrical 36-311 TKO™ 4 Pcs Hole Cutter Kit – Carbide Hole Cutter Set Smooth Start Pilot Bit Carry Case

  • Superior Performance: TKO carbide tipped hole cutters provide the most precise and clean hole saw and knockout replacement in the industry with....
  • Precise Design: The hole saw cutter has ground carbide teeth made from high quality HSS producing clean, burr-free holes. The carbide cutter includes....
  • Smooth Cutting: The innovative design includes a SmoothStart pilot drill which guides the cutter to the surface, avoiding damage to the cutter and....
  • Convenient Usage: The carbide tipped cutting hole saw has an integrated arbor for solid rotation providing smooth accurate holes without chattering.....
  • Product Specifications: The TKO carbide tipped hole cutter kit is supplied with SmoothStart replacement tip, 7/8 in., 1 1/8 in. and 1 3/8 in. diameter....
Check Stock

Benchmark Abrasives 10' 60T TCT Wood Saw Blade for Finishing on Sliding Miter & Radial Arm Saws

  • SIZE – 10″ Blade Diameter, 60 Teeth, ATB Grind, 5/8″ Arbor, .094″ Kerf, MAX RPM = 6,700.
  • CROSSCUTTING & FINISHING – This wood cutting carbide saw blade is excellent for crosscutting and finishing of softwoods and hardwoods in a range of thicknesses, with occasional cutting of plywood, wood framing, decking, etc..
  • PREMIUM TUNGSTEN CARBIDE – The tungsten carbide tips are welded one by one to the tips of each blade in a fully automated manufacturing process..
  • SOLID STEEL CORE – Each of our wood blades is laser cut from solid metal sheets, not coil stock like other cheaply made blades. Benchmark Wood TCT blades are manufactured to exacting European standards..
  • SATISFACTION GUARANTEE – Benchmark Abrasives is proud to stand behind our products. If for any reason you are not completely satisfied, please contact us right away and we will make it right..
Check Stock

Bosch 85283MC 1/4 In. x 25/64 In. Solid Carbide Veining Router Bit

  • Micrograin solid carbide – ensures consistently smooth finish cuts, with superior wear resistance.
  • Veining bit – used for recessed design veining in fine cabinet surfaces.
  • Solid carbide build – provide the best rigidity and long life, for faster feed rates and chip removal, hard-to-route materials and superior bit life.
Check Stock

ACCUCUT I2DMS 2 Flute 3/8 Carbide End Mill Multi-Function for Deburring Spotting Chamfering & Side Milling 90 Degree bits AlTiN Coating

  • General Usage: Applicable with copper, copper alloys, alumiumn and alumiumn alloy, woodworking, cast iron, steels, carbon steels, alloy steels and stainless steel materials. Best use for materials HRC less than 40..
  • Solide Carbide: The material is European origin ultra fine grain carbide. The carbide rod we choose is made with the finest tungsten carbide powder and cobalt, using the best ratio to achieve the most ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible..
  • AlTiN Coating: It is a strong coating that's coated at temperatures between 450°C to 475°C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced..
  • Versatile Design: This end mill is designed for multiple purposes, such as chamfering, spotting, deburring and side milling. The chamfer degree is 45 per side..
  • 35° Helix: 2 flute and 35 degree helix design is ideal for roughing application because of its gr....
Check Stock

Carbide Tipped Wood Turning Tools Set Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts

  • OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert..
  • MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability..
  • INDEXABLE CUTTER DESIGN – Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the "Aogbra Store" to order replace carbide cutter inserts when you need ).
  • EASY TO USE – The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools..
  • TOOL DETAILS – Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest..
Check Stock

Marshalltown 17” Tile Cutter Cuts Ceramic Porcelain Mosaic Tile DIY TC17

  • The MARSHALLTOWN Tile Cutter is easy to use, portable, and dust-free, making it an ideal tool for DIYers.
  • This tile cutter is versatile and makes straight tile cuts to ceramic, porcelain, and mosaic tile up to 17 Inch long and a .5 Inch (12 mm) thick. You can also cut tile up to 12”x12” (305 x 305 mm) at a 45-degree angle for different tile installations..
  • This tiling tool has a two-rod rail system that allows smooth operation as the tungsten carbide scoring wheel scores the tile for quick, easy cuts. It also includes an adjustable measuring guide for precise cuts..
  • A durable 5/8 inch (15 mm) tungsten carbide scoring wheel is designed for performance. The tile cutter also includes an adjustable measuring guide for precise cuts..
Check Stock